Bt50 Ranger 3.2L Puma Glow Plug Diagnosis
Автокөліктер мен көлік құралдары
If this video was helpful feel free to donate
www.paypal.com/donate?hosted_...
disclaimer
this video is for education and training purposes only. Practice methods and work shown on this video at your own risk. We recommend only professionals to carry out repairs on any automotive system.
Пікірлер: 4
Very methodical and in deep👍. Thanks for sharing
Aren't those glow plugs rated 4.4V? When I use a multimeter I got 2.2V at all 4 glow plug terminals on my BT50
Thanks for the video. Can i use a multi-meter to check the connections from ecu/ fuse board rather than the oscilloscope you are using? I also need to use a multimeter at the glow plug end of the module rather than the circuit tester you are using.
@a1mechanicaloakey639
Жыл бұрын
I like to check powers and grounds with test light. You can definitely use MM but if there is voltage drop in the circuit then you may miss it under load.