Hey guys, Emily here. As always, we strive to bring you the highest quality videos we can, but unfortunately that's not always possible. Once again, this video has a bunch of "skips" in it throughout the second half, and after several months of emails with customer support, we still have no answers. We are beyond frustrated, but at this point, our only option is to go ahead and post it. I'm truly sorry, and I hope you guys understand. If anyone has any experience with video editing/rendering/errors after uploading, please reach out. Thank you guys for watching, and thanks for all your support!

@joeykennedy418

11 ай бұрын

We still love the info. Thanks for all you do!

@mattmcgrath3895

10 ай бұрын

Hey guys, great video as always. There is a company called air raid and they make a cold air intake that is compatible with the stock air filter box. Could make a video installing an air raid on an LS that has been put in a square body, and mounting the factory air filter box from the LS to the square body like you did with the coolant reservoir? I would super appreciate your expertise on that! Thank you as always

Jerry,a 5/16 nut driver makes tightening hose clamps much easier than a flathead screwdriver. Great job!

@UglyTruckExperience

11 ай бұрын

Definitely! We actually switched to that in the middle of the video. Thanks for tuning in, Brian!

You guys helped me a lot, finishing my ls swap on my 1983 c10. Thank you so much.

@UglyTruckExperience

11 ай бұрын

Glad to hear that! We appreciate you watchin, Beto!

Even with the skips it’s a quality video even with a Milli Vanilli mention! Love what you two do! I am starting several LS swaps with your helpful tips. Many thanks! Wish you two were closer to me but I am stuck in California. My loss.

@UglyTruckExperience

11 ай бұрын

Thanks so much Michael! I like that you said "several" swaps! 😆 What are you working on?

@robertallen2108

11 ай бұрын

Thanks, I missed that video

Welcome 🤗 I’m fan from Saudi Arabia 🇸🇦

@UglyTruckExperience

11 ай бұрын

That's awesome! Hello from Missouri, US! 👋 We appreciate you watching!

Great ideas here. Inventive as always Jerry and Emily. I get the 80s jokes always. Comedy You guys make me laugh. Love it.

@UglyTruckExperience

11 ай бұрын

Thanks Jon Jon! Glad you get our jokes! 😁 Have you torn into your 81 swap yet?

@jonjon_az

11 ай бұрын

@@UglyTruckExperience Yes I have torn into the 81. In the process of putting the vintage air in. Just hot out here in Phoenix. The bracket worked flawlessly thanks to you both.

Great video! Jerry is looking lean and mean these days. 💪🏽

@UglyTruckExperience

11 ай бұрын

Thanks Tony! He's lost almost 40 lbs this summer! 💪💪

@Fahrenheit_Motorsports

11 ай бұрын

@@UglyTruckExperience Nice! Looks good on him. I could tell immediately lol. Keep him healthy and active. You’ve got plenty more knowledge to share with the community.

Just use a cheek poker to clean up that aluminum case on the alternator and a polishing wheel to put a mirror shine on her. Love your videos, we need more UTX

@UglyTruckExperience

11 ай бұрын

Thanks Randy! We've got plenty more videos coming up soon! 👋

Emily, the video was great as usual! Intake looks awesome. I won that cassette of Manilli Vanilli being the 5th caller as I had nothing better to do working a 7pm to 7am shift. Never told anyone that before and maybe I still should not...

@UglyTruckExperience

11 ай бұрын

Thanks Bryan! So you're saying we need to add a cassette player to the truck?? 🤣🤣

@blong6386

11 ай бұрын

I was really hoping for a 8 track player. Get to listen to Don Williams.@@UglyTruckExperience

@UglyTruckExperience

11 ай бұрын

We love Don Williams. He is on our playlist and we listen to it daily. Although, We honestly do not have any Milli Vanilli on that list. It was interesting to learn that you have the only Milli Vanilli tape in existence. I hope the radio station mailed it to you. I would have hated having to walk in and say I'm here to get my MV cassette tape. Jerry

@blong6386

11 ай бұрын

LOL Ashamed is a better word for it. I did use my cousins name though so at least when they called out the winner it wasn't my name. @@UglyTruckExperience

@UglyTruckExperience

11 ай бұрын

🤣🤣 Smart move. Hope your cousin didn't get beat up too bad.

Stellar job as always! Milli Vanilli- if you say it 3 times while looking in the mirror, you will have an amazing karaoke performance. It’s worth a try!! Love y’all

@UglyTruckExperience

11 ай бұрын

🤣🤣🤣 I didn't forget about your shrine... I'm missing a crucial piece, but it'll turn up one of these days. 💜 How's the Subie swap coming?

@jonvasquez4729

11 ай бұрын

@@UglyTruckExperience It’s moving along slowly, like me. It’s a funny coincidence, I just built the intake tube, MAF sensor inline, air filter. I also had to incorporate 3 tubes into the intake tube between the MAF and throttle body. Two 1/2” tubes for the PCV/valve cover vents, and a 3/4” tube for the Idle Air Control (IAC) valve. I also built the header, added an O2 sensor bung, and modified a nice stainless muffler a buddy donated to the cause. Waiting for heat wrap and new gaskets, it’s currently painted with VHT high temp header paint in flat black. I’ll get pics of the intake tube after it’s painted and installed. I’m not gonna lie, I watched this last video closely, trying to find a VW or Subaru emblem hidden in the background. After the third time watching, I gave up. It’s ok, I’m still more of a Chevy guy anyway…Never stop building! Cheers! -Jon

good morning 🙏

@UglyTruckExperience

11 ай бұрын

Hi Alonso! 👋

For the air intake hose ,check out napa nbh antk127 or spectre spe - 9775. See if maybe 1 of them may work. Informative as usual.

@UglyTruckExperience

11 ай бұрын

Thanks Dozer! We'll check those out!

I miss my moms 78' K5 and I had a 85' K5 Black with red interior. I miss the 85 as well.

Isn’t Rob Pilatus of Milli Vanilli already an ancestor at his own hand?? Good luck with that sponsorship 🙃😂🙃

@UglyTruckExperience

11 ай бұрын

Hello Anthony. That is correct. After mentioning them in the video, we pulled up some info on them and found out that he had passed away. Jerry

@abrdds

11 ай бұрын

@@UglyTruckExperience Jerry, I cant wait til you fire that truck hoopty up... after all the work you two have done, that B I Zitch better run well enough for Ripley to lean and cruise behind the wheel...🙃✊🏾

@UglyTruckExperience

11 ай бұрын

😆 Ripley is ready for a cruise!!

Quick question, im currently working on a 72 c10 and i was wondering if on the truck fuse box the wires that are labeled ELECTRIC CHOKE and ALTERNATOR IGN are hot at all times or key on?

@UglyTruckExperience

10 ай бұрын

The electric choke should be with key on and the alternator, ign should be hot at all times. I would double check with a test light. Thanks. Jerry

1. Good video as usual 2. Will this intake work with a 2010+ l99 Camaro water pump installed? 3. How about a video on wiring for cruise control and wiring for 4L80e.

@Fahrenheit_Motorsports

11 ай бұрын

They have a video on cruise control. They also have a video on wiring the 4L60 but Jerry and Emily would have to confirm if the wiring is similar. Here is the cruise control video. kzread.info/dash/bejne/h6iMk5iYmpOwnLQ.htmlsi=JLwQrf0C_MKmSln8

@UglyTruckExperience

11 ай бұрын

Hello Bob. I don't know why it wouldn't work. I think the L99 intake coolant shoots out a few inches below the intake. With the pipe coming up it shouldn't be a problem with the upper hose I would think. If you do it, let us know either way how it goes. Here's a link to our cruise control wiring video. kzread.info/dash/bejne/h6iMk5iYmpOwnLQ.html If you're working with DBW this should apply to any transmission. We appreciate you watching and commenting.

@robertallen2108

11 ай бұрын

Thanks, I missed that video

Obviously a guy who knows how to work on vehicles! The LOW front tires on the Truck (being FLAT), shows me you have worked on things for some time!

@UglyTruckExperience

11 ай бұрын

Gotta do what you gotta do to get comfy! Saves your back from leaning over all day. Thanks for tuning in, DE!

Can you tell me how to wire up a ob2 connector on ls swap, thanks

@UglyTruckExperience

10 ай бұрын

Hi Johnny! Here's a video! kzread.info/dash/bejne/gn1lwcmIZ9bgac4.html

Where can I get that bellow ? Or if you guys remember the part number will be helpful. And love the videos been a big help

@UglyTruckExperience

3 ай бұрын

Hey Manny! That rubber bellow is from the LS donor intake tube if you have it, or the junkyard should have a bunch. Let me see if I can find a part number to get one new... Thanks for tuning in! --Emily

@mannysolis4588

3 ай бұрын

@@UglyTruckExperience thanks a lot I appreciate it and keep making videos, been a big help with my build thanks

Jerry, I know this has nothing to do with this video, but I didn’t know how else to ask you. Have you ever rebuilt the A-arms for the squarebody? I’m wondering if I should buy a tubular A-arm kit or would it be just as good to rebuild the stock ones with polyurethane bushings. What’s your thoughts? Thanks in advance.

@UglyTruckExperience

11 ай бұрын

I have rebuilt them. If you use polyurethane bushings be ready for them to squeak. I have used tube kits on lifted trucks with no problems also. If I was doing it on my own daily driver, I would probably rebuild the A arm with standard bushings. That is my opinion I guess. Let us know which way you go. Thanks. Jerry

@joeykennedy418

11 ай бұрын

@@UglyTruckExperience thank you sir. That is exactly why I was thinking. I’m building a cruiser not a race truck, so I think I’m just going to rebuild with standard rubber bushings

He's going to use FM to cut that pipe. Friggin Magic.

@UglyTruckExperience

11 ай бұрын

He's a magic man! 🤣🤣 Thanks for tuning in, Dan!

where can i get that upper radiator hose?

@UglyTruckExperience

5 ай бұрын

Hey Carlos, That upper hose is the stock hose from a 2004 Silverado with a 5.3 LS. GATES 22436 We buy them from Orielly's. Thanks for watching. Jerry and Emily

Thought you shirt was going into that die grinder for a second..😳 😅

@UglyTruckExperience

11 ай бұрын

That would be bad! 😬😬 Thanks for watching, Ryan!

@ryanmcclendon3309

11 ай бұрын

@@UglyTruckExperience ya,be careful! I like watching your guys’ channel🤓👍🏼🤙🏼

Hey, would u happen to have the part number to that radiator hose or make and model of the part?

@UglyTruckExperience

11 күн бұрын

Hey Timothy, the upper radiator hose is a Gates 22436. We use the donor radiator, so all of our radiator hoses are from the donor as well (2004 Yukon). Hope this helps! Thanks for watching! --Emily

@timothybrown3495

11 күн бұрын

@UglyTruckExperience perfect thank you

Hi guys I was wondering if you can help me with wiring the tow/haul button. Maybe make a video of how to wire it? Or just explain real quick what wire I need to hook up ? Thank you mine is from a 2002 Silverado

@UglyTruckExperience

11 ай бұрын

I will take a look at that and get back to you. Jerry

@UglyTruckExperience

10 ай бұрын

Hey Danny. On that truck, your tow haul haul button sends a signal to the body control module and then the body control module sends a DATA signal to the ECM to turn on tow/haul. Most likely you do not have the BCM as part of your swap. I will be doing this in upcoming videos. It will be very similar to how I run the AC system. If you do have the bcm already, let me know and I could help out. Thanks . Jerry

@OldGuy54

10 ай бұрын

@@UglyTruckExperience I do have it just didn’t use it but I can if it is easy

@UglyTruckExperience

10 ай бұрын

Great. Hang onto that BCM. I will take a look and see how involved it will be. Jerry

@OldGuy54

10 ай бұрын

@@UglyTruckExperience I have the whole donor truck so thank you

Jerry really looks skinny in this video. Hope all is well. I rocked out to Millie vanillin when I was a kid at skateland

@UglyTruckExperience

11 ай бұрын

We have a Skateland here, but Skateport is where I found my love for Notorious B.I.G. 😆 Jerry put himself on a diet this summer and has lost about 40 lbs! How's your swap coming?

NOT a fan but I do remember them.

@UglyTruckExperience

11 ай бұрын

😆 Definitely going to add some Milli Vanilli to our playlist...

@GrandPitoVic

11 ай бұрын

ROFLMFAO!!!!

If your not burnin, stingin or bleedin your still sitting on the couch.