Awesome review! So many people start out showing their children, pets etc. and waste a lot of time. You got right to the point and explained it VERY well. Thank you!

@MarkThomasBuilder

4 жыл бұрын

Thanks so much!

Cutting 6'x2' access plumbing panel and then using to mount backing strips to attach plywood access panel. Lastly used to locate screw lines for screws so that they align with the backing strips. Incredibly handy tool allowing you to always measure and cut plumb and level as your absolute baseline. Love it

@MarkThomasBuilder

4 жыл бұрын

I think once you get something like this, you'll wonder how you ever got along without it.

if i needed to make a straight horizontal line 30-50 ft high... how would i go about making a leveled line without attaching this to the wall or sitting it on a 30-50ft ladder or flat surface on the floor.

Thank you for this very informative and helpful video 👍

@MarkThomasBuilder

5 жыл бұрын

I appreciate you letting me know, thanks!

I don't even do this work but was just wondering around on amazon and saw a really expensive thing and was like what is that for and came to yt found this video and I not only got to know how it works but where its applications can be. Nicely Explained

@MarkThomasBuilder

3 жыл бұрын

Thank you! If you're framing a basement or installing some cabinets, this will be very handy for that.

I do woodwork including table tops, benches, cabinets, butcher block etc. This is exactly what I was looking for to create square chalk lines with a piece lying on top of a work bench. Wish I could find the same features cheaper though. Thanks for the great review

@MarkThomasBuilder

3 жыл бұрын

Yeah, it's a handy tool. If you get one, I'm sure you'll find plenty of uses for it to make it pay for itself over time.

Great video! Thanks!

@MarkThomasBuilder

3 жыл бұрын

You bet!

Will this laser shoot a line across the ceiling, or a dot straight up as a plumb Bob would? I am an electrician. They are good for keeping light rows straight. Didn't know if this one at the price point could do that.Thanks great reviews

@MarkThomasBuilder

5 жыл бұрын

Thanks, it's not exactly a plumb bob, where it will shoot a point straight above it or below it. I use the laser vertical line to run electrical conduit perfectly plumb on the wall. It helps me know where to drill the holes in the ceiling above the electrical switch box. The more I think about it, that might be what you're asking. Does that help answer your question?

@ronh9384

4 жыл бұрын

Lyndal Stuart I use this in conjunction with a 5 dot laser and the two would be excellent for that type of project

@ACitizenOfOurWorld

3 жыл бұрын

You could just use this laser's plane crossing points as your dot substitute. There are six crossings in all six directions.

@nicholasdix5598

2 жыл бұрын

I am currently painting custom commercial property and I use this Lazer to put 90° zig zags across a 3000 sq ft ceiling

thank you sir

@MarkThomasBuilder

5 жыл бұрын

You bet!

I'm trying to perfectly line up a grid of can lights (in a row) , would this help or would another model be better?

@MarkThomasBuilder

5 жыл бұрын

This would be great for that project. I'm sure you would find many projects with it in the future. I know I have.

I have the same mount no matter how you tighten the laser to the mount the swivel is too loose. When using it for vertical lines my laser moves a little with the slightest draft or wind. Does yours do the same?

@MarkThomasBuilder

4 жыл бұрын

Good observation, I noticed that too, but it seems to stay in the same position while indoors. A couple skinny wood shims will hold it in place. I have the another Bosch product, the GLL 100 G and it comes with a smaller mount, the BM3, that works better and can be fully tightened down.

I am installing recessed lighting in ceiling, to make sure my recessed light is lining up in a true straight line will this level do that and project straight lines on my ceiling?

@MarkThomasBuilder

4 жыл бұрын

Yes, if I understand what your asking it seems like it would work well for that.

awesome

@MarkThomasBuilder

5 жыл бұрын

Thanks!

This is perfect for tiling washrooms

@MarkThomasBuilder

4 жыл бұрын

💯💯

Hi I'm going to start installing ac ceiling cassettes. What laser lever do you recommend to get a perfect square or rectangle in the ceiling so I can cut it out. Lmk plz thx

@MarkThomasBuilder

3 жыл бұрын

This laser design is a good choice for that. This projects a red laser which works just fine, but if you want a brighter laser to see, I'd go with the green option.

@shielduniversity419

3 жыл бұрын

Thx for replying but I do not see a way to make it shoot up vertically after I watched whole video

Will this laser project to the ceiling for say putting in surround speakers into the ceiling??

@MarkThomasBuilder

4 жыл бұрын

Yes, it shoots lasers on 3 planes, a vertical line being one of them.

I work at a ballpark and I'm going to try and use one to chalk the foul lines since we do this at dusk

@MarkThomasBuilder

3 жыл бұрын

Interesting use for one of these. I think it should work well at dusk, but let me know how it goes.

great!

@MarkThomasBuilder

2 жыл бұрын

Thanks!

great

@MarkThomasBuilder

4 жыл бұрын

Thank you!

with manual mode can it be turned at any angle without it blinking? or trying to level?

@MarkThomasBuilder

6 ай бұрын

It will always blink when out of level.

Framing interior walls I think

@MarkThomasBuilder

5 жыл бұрын

It will come in handy for that!

Hanging ceiling conduit on a 20' tall pole barn sheet metal

@MarkThomasBuilder

Жыл бұрын

Yeah, sounds handy for way up high like that.

i would use it for windows and doors for mexico market not always very level thanks

@MarkThomasBuilder

3 жыл бұрын

Yes, it would come in handy for that!

@bluerock9238

3 жыл бұрын

Jean Send a video

Does this work for making a fence line?

@MarkThomasBuilder

4 жыл бұрын

Yes, the laser may need to be used on a cloudy day or at dusk to see the red line.

@JCM991

4 жыл бұрын

@@MarkThomasBuilder thanks

If the surface is unbalanced, will it still level with the wall?

@rubenvarela4077

4 жыл бұрын

Yupppppp

@MarkThomasBuilder

4 жыл бұрын

Yes, up to 4 degrees from off level, I believe.

Can you drop it like the chalk line at the beginning and it still works lol

@MarkThomasBuilder

3 жыл бұрын

Hummm... maybe their smaller cross-line levels can withstand some rough action. This one has some weight to it.

I would use it to ensure that fence posts were all at the same height

@MarkThomasBuilder

4 жыл бұрын

It would work well for that.

havnt found one channel that do outdoor reviews..........still keep looking.

@MarkThomasBuilder

3 жыл бұрын

Are you looking for outdoor lasers? I reviewed a Bosch 800' level last year.

@EnnTomi1

3 жыл бұрын

@@MarkThomasBuilder thanks, great video!!!

I just order one to installation floor and wall tile as a chalk line will not work.

@MarkThomasBuilder

3 жыл бұрын

Awesome, this laser works well for projects like that.

Came for the level. Stayed for the N* hat! Damn I miss old school hockey. Bring back the Northstars and the Whalers!!!

@MarkThomasBuilder

4 жыл бұрын

Wow, that's cool! The first NHL game I went to was in Detroit, and there were guys not wearing helmets. Old school!

@silentmajorityuscitizen9990

3 жыл бұрын

My father would take us to the old Met for North stars games back in the 60's. Good ol time!

Setting fence post on a line

@MarkThomasBuilder

2 жыл бұрын

This does an amazing job of that.

Getting a level line on posts for a deck job, less then 30 ft.

@rickcarran1547

2 жыл бұрын

I have the cheaper version its good up to 30 ft.

@MarkThomasBuilder

2 жыл бұрын

I've used the laser for that type of project. It works well.

I want one

@MarkThomasBuilder

4 жыл бұрын

You'll probably use it regularly if you get it. I find it very easy to set up and use on a variety of projects. I wish I had it when building a wall in my basement that's crooked.

Здраствуйте.Сколько стоит это Лазер.

@MarkThomasBuilder

4 жыл бұрын

$399

Well, I guess Bosch listens to its customers because they did give us the hard shell case and they switch the laser color to green for better visuals. Not too bad.

@MarkThomasBuilder

10 ай бұрын

Green is worth it, even if it's extra money.

Just put up several mirrors for an eagle eyed woman. A laser would have come in very handy.

@MarkThomasBuilder

Жыл бұрын

Yes, it makes the job go fast and accurate.

Every laser I’ve ever used is worthless in the daylight. Are you implying with your examples of this laser actually can be seen outside in the daylight?

@MarkThomasBuilder

3 жыл бұрын

You can only see them in low light outdoors, like a really cloudy day or at dusk. Milwaukee is going to make a detector to use outdoors with these. They work up to 165'.

Not rechargeble batteries?

@MarkThomasBuilder

4 жыл бұрын

No, they're not rechargeable.

Makita is better because there is an option to use electrical adapter, bosch only manufacture battery only so it dont last long may for 10 minutes before your work is interrupted due to battery life already drained out.

@MarkThomasBuilder

3 жыл бұрын

I like that feature.

@jeremiahtallant

5 ай бұрын

No it does not drain in 10 minutes 😂 have you even used one of these? It will last a full day you nincompoop

04:41 *perfect* 90° angle? *I* doubt that. There is no such thing as a perfect 90° angle in the *real* world. What *tolerances* does BOSCH state? 07:19 okay - fair enough.

@MarkThomasBuilder

4 жыл бұрын

Hopefully this video was a thorough review of the 3 plane laser.

@joshualand5467

3 жыл бұрын

Lol, I'm glad you didn't build my house.

@GNU_Linux_for_good

3 жыл бұрын

@@joshualand5467 Ha, haaaaaaa........

Green line will be better.

@MarkThomasBuilder

3 жыл бұрын

Yes, I agree.

Watch at 1.25 speed and thank me later.

@AequitasSaints

4 жыл бұрын

I bumped it up to 1.5 lol

dude why is this small thing 570 dollar, don't need it though was thinking what it does but damn thats expensive.

@MarkThomasBuilder

3 жыл бұрын

I just checked the price of the new Milwaukee one that's being released next month, which is $599. A high quality 3 plane laser is a very handy tool to have, which saves you time and money versus using a 3' level or chalk line.

If you telling me that chalk line is useless to you because you have a laser, it's only mean that you don't know how to use chalk line and you don't know the purpose of the tool. So going in this direction leave review of the tools for professional people

@MarkThomasBuilder

4 жыл бұрын

I've used a chalk like for years and think they're amazing. The laser line is my new go-to method since it's fast and clean to use.

@billwalters4338

Жыл бұрын

Only the highly intelligent recognize sarcasm. You didn't recognize it.

QUESTION OF THE DAY: What project do you see this cross line laser being the most useful for? A drop ceiling? Hanging picture frames? Installing cabinets?

@Fanta....

5 жыл бұрын

@@yecoutielcohen4331 INSTALLING CABINETS????????

@eddiesmith224

2 жыл бұрын

I'd use it to roughly layout the foundation of my workshop, that would be indispensable.

@derekg3230

Жыл бұрын

All the above

That long intro isn't necessary anymore

@MarkThomasBuilder

4 жыл бұрын

I agree. I haven't used it recently. My plan is to make another one, but only about 10 seconds. Thanks for the advice.

Plumbing layout commercial

@MarkThomasBuilder

3 жыл бұрын

It would work great for that!

*So far, this device has performed as advertised.It's built rugged🌕 **allabout.wiki/GRL400H** Gold the laser is easy to see and the storage case is well made*

@MarkThomasBuilder

3 жыл бұрын

No it does not. I made a video review of the Bosch 800' Self-Leveling Laser, which may be a better fit for you and includes those items.

great

@MarkThomasBuilder

Жыл бұрын

😀🙌