Borla-140775 Silverado/Sierra 1500 6.2L 2019 Cat Back Exhaust ATAK: amzn.to/3l9VYq6 linktr.ee/donslife - Links to all of my products and discounts

Have the exact same set up on my 2021 AT4 and absolutely love the sound. Great video!

Definitely a sophisticated sounding exhaust good choice, and as much as I like the stock exhaust tips the quad tips look great!

Sounds great, reminds me of the old XR-1 system I had. Deep and refined 👌

Really glad I happened upon your videos. I really enjoy them. I've got the identical system, but with the Touring muffler. Your neighbors have likely shared their thoughts, but for me your vid definitely reaffirms my choice. My truck is *loud* early in the morning! Two other notes, for whatever they're worth. First, there wasn't a Borla hat in my box, which makes me go wah. Second, very good call on the thorough inspection. I've got the longer "standard" bed, and even though the description and manual stated the kit included the extra intermediate pipe, it actually didn't. This delayed my install, and I was disappointed in how the vendor (and Borla, I suppose) handled it. Ultimately, I went to my local exhaust shop where they removed the length of pipe needed from my stock system, and welded it on to the Borla. Stainless-to-stainless, no harm-no foul, other than an extra hit to my wallet. A bit frustrating - you'd think a $1,450 (US) system would include much better QA/QC - but I still smile every time I drive the truck. Thanks again.

@Donslife

2 жыл бұрын

I am happy it worked out for you overall. If we ever cross paths, you can have my Borla hat 😉 🧢

Sounds great. Brings back memories of my Oldsmobile 442 in the day. Enjoy all of your additions.

@Donslife

2 жыл бұрын

🤘🏼

I really wanted that for my birthday this September 17th but it wasn’t in my budget. Now, I understand GM has the RED GMC grille emblem that lights up!! I really would’ve wanted that for my birthday. My GMC Sierra DENALI ULTIMATE truck is so much fun to drive and when I’m in town or on the highway I notice other GMC beauties. Perhaps next year I’ll get both.

I installed the Borla Atak on my CarbonPro AT4. I love the sound. I was afraid it was going to be to much, but I don't regret it. Sounds amazing.

@francislongtin9531

2 жыл бұрын

Hy 7y

@marcrendon7292

9 ай бұрын

Did it void warranty putting this on the carbon pro at4 the duramax right 3.0 ?

Nice setup👌🏾👌🏾👌🏾👌🏾. I can’t wait to put my exhaust on

I just put this exact setup on my 23 F150 5.0. Absolutely love Borla exhausts. Definitely worth the money.

@Donslife

5 ай бұрын

Agreed!!

The sound is second to none. Like you, I want something that growls but is not obnoxious, loud but not too loud. The drone on the inside seemed very tolerable. I’d love to get the decibel readings. The 10 speed transmission really makes the sound almost dance as well. Secondly, I’m completely jealous of how handy you are, installing that on your own. You made it look so simple and yet I’m sure it’s not as difficult as I’ve made it in my mind. Thanks for sharing, I’m looking to do something very similar, if not the same to my AT4 soon.

@Donslife

3 жыл бұрын

Thanks Barry! Glad my content resonates with some viewers. Let me know if you have questions!

@marcrendon7292

9 ай бұрын

@donslife can I put this exhaust on my 3.0 duramax at4 or will it void my warranty ?

Very nice sounding setup. I never put an exhaust into a truck until a couple months ago on my 2016 Sierra. Didn’t realize the fun I was missing out on all these years!

@Donslife

3 жыл бұрын

🙌🏼

@khiaraslaw

Жыл бұрын

what you install?

@Thesheriff1776

Жыл бұрын

@@khiaraslaw did a very simple super 40 and had a muffler shop dual it out the back. Deleted resonators and stock muffler

@khiaraslaw

Жыл бұрын

@@Thesheriff1776thanks have a 2016 5.3 thinking of doing a up grade as well

@Thesheriff1776

Жыл бұрын

@@khiaraslaw cheaper way to get a good sound. Local shop did it for me in a couple hours for $300.

Exhaust symphony 🔥🔥🔥

love that exhaust i put it on my f150 5.0 3 weeks ago! yours sounds great!

@Donslife

9 ай бұрын

Right on! 👍

6:30 gotta be perfect balance for the 6.2l , I know what I’m getting for my refreshed Trailboss. Thanks Donny boy ❤ from northern ALBERTA

Been waiting for this video. 🤘🏻

@Donslife

3 жыл бұрын

Hopefully it was worth the wait!!

@DKLabs99

3 жыл бұрын

@@Donslife definitely would go this route if I do it. Sounds great

I have the atak on my GMC SLT and when I hopefully get a new 2022 AT4 I will go with the S-type for sure. Sounds quieter in the cab than mine for sure. Thanks for the video

@Donslife

3 жыл бұрын

Thanks Bigdog! Sure liking it!

Sounds real good. Well done!

@Donslife

3 жыл бұрын

Thanks Craig!

Sound just like my 2014 Chevy with the 5.3. I have short tube headers and the Borla atak cat back system. I love mine. Yous sounds GREAT!!!! I'm trying to figure out which Borla muffler I want to put on my 1999 Cadillac SLS. It's straight piped now. The 4.6 Northstar has a great deep tone to it but it's got a bad drone. I want to keep the volume & tone but want to drop the drone. Thank you for a great video and sound clips.

Based in part on your videos, I ordered Borla-140768BC today for my '22 Silverado. This is the Touring version. Debated on S-type, but my truck is an LTZ, not a Trail Boss or RST, and it is not lifted due to my nearly 71 year old knees. Just want a bit more personality. Had Flowmaster duals on my '01 Suburban. Very noticeable when towing our travel trailer at 68 mph in third gear (2,700 rpm - couldn't hold 4th). Thanks for all the useful information.

@Donslife

2 ай бұрын

The Touring is a solid choice. Enjoy

Sounds and looks great! Just waiting on my 2022 to show up on or around March 21st. This exhaust will be one of the first things to do on my model list for sure! Thanks for the videos. Very helpful in my decision making! Any good Canadian distributors that you recommend for any of the parts that you have installed?

That sounds awesome!

@Donslife

3 ай бұрын

It does!

Great video. Cant wait to put mine on

@Donslife

2 жыл бұрын

Love mine!

I had ATAK only installed on my 5.3L. Both flappers removed but kept the resonators. Mine sound about the same. Will drive it for a month or so then decide if I want to take out resonators. Want it loud but don’t want to wake the dead on cold starts.

Definitely doing exhaust... on yours you said s type ... but link is to the atak system.. I'm for sure doing the same type.! Thanks for the video! 👍👍

@Donslife

2 жыл бұрын

Yes - The only link I could find was for the ATAK - but many people have wanted that one too.

I finally upgraded my exhaust system to the GMC Borla S type, specific to the AT4X. It definitely improved the sound and I've managed to get some improvement in MPGs.. Great video btw.. Honest review, much appreciated

@MandeepGill-sf7rs

Жыл бұрын

I have an AT4x as well and looking to install the Borla S type kit. Went to a muffler shop and he was trying to sell me on not going with the S type, but getting the Borla XS Pro muffler. Any thoughts?

@krisr7324

Жыл бұрын

@@MandeepGill-sf7rs I don't know about that specific product. I also opted to have the dealership install my exhaust system. I know it cost more, but I have peace of mind for any warranty related issues

@MannyGill-dx4bi

Жыл бұрын

@@krisr7324 I will actually reach out to my local dealer to see what the difference in price may be. You have a point with it not having any warranty issues going through the dealer. One additional question. Are you happy with the sound of the S type? Did you look at the Atak? Thank you!

@krisr7324

Жыл бұрын

@@MannyGill-dx4bi Iove it, it's not too audicious. It's definitely loud on cold start though, so be prepared. Looking back, I usually take a lot of calls while driving and it's impacting my call experience, but I've come to accept that. It will be heard inside the cabin, but not too noticeable on the highway and under cruising conditions. The system is sanctioned by GMC, so it's rather tame..I did consider the Atak, but I wanted something less noisy. One other thing, the sound is definitely off with DFM. enabled. There's a big difference

@MannyGill-dx4bi

Жыл бұрын

@@krisr7324 Thank you for the information. I ordered the Borla S-Type today from a local Muffler shop. We ordered the it for the AT4 model with the quad outs and he is going to fabricate it to fit my AT4X. Should have it completed next week!

Man that sounds good! 🏁🏁🏁🏁

@Donslife

Жыл бұрын

It seems to sound better over time too

Love that white gmc badge. I have a red sierra elevation and I want a black gmc badge.

Looks like land of the living skies ! The home country !

@Donslife

2 жыл бұрын

Yes sir, this is my current home! Pretty incredible lightning shows and sunsets

@KTB3007

2 жыл бұрын

@@Donslife miss it a lot - in NW ON now. Great tuck - has S type on trail boss - loves it - got 21’ HD - waiting for Borla to release 6.6 gas kits !!

@Donslife

2 жыл бұрын

@@KTB3007 almost sounds like you’re in T-Bay. Borla on the 6.6! 👍🏼

What a difference 👏 sounds 👍 great. I noticed some other additions you did as well. Airbags and air intake. I sure hope these minor adjustments will not void our warranty. There has been some talk on the internet that GM has installed weight sensors. If you are over, the payload will void the warranty. Will research, in the meantime, we will have to have our exhaust installed (at our age). You are superb at installing and have great instincts on produts. Thanks ✌️out.

Awesome truck.....I got the same one and did a few of your mod ideas. You need a lift with all the work you do...haha. I noticed you still have the stock rancho shocks on.....I highly recommend the bilstein rear shocks and bilstein front strut/coil spring kit they have, completely changes the ride. No more rear end bounce and the fronts have 3 circlip settings to level the front. I put my fronts on clip#3 setting and it leveled it off nicely. I'll keep watching for mod ideas. Thank you.

@Donslife

2 жыл бұрын

They are on my short list. Might do the fronts first. Canadian suppliers have been short. Importing auto parts from the US force us to pay substantial extra duty charges on top of the hit we take with the currency exchange. However they are on my radar!

@kevinscott8038

2 жыл бұрын

@@Donslife you will be very happy with them. Did you try summit racing? I think they ship worldwide, I bought mine from there, but im in US. They are an official bilstein dealer to. This is why the world needs to adopt cryptocurrency so people can buy what they want from where they want and not get hit with an exchange rate. Thanks for your videos. I'm gonna do the gloss black vinyl wrap next on my fog light trim bezels....great idea! I got the red cayenne tintcoat paint so I'm trying to black out some trim, goes well with the red tintcoat paint 👍

@Donslife

2 жыл бұрын

I have used Summit Racing in the past. I bought an entire electrical vehicle harness from them a few years back. The exchange and duties still made it cost almost double. This fall I think I will just do it regardless

Nice work man I'm jealous

@Donslife

3 жыл бұрын

No regrets!

Electric cutout’s where its at. Stock when you want it stock, straight piped when you want to hear it.

Truck sounds awesome, I've been wanting to get the s type exhaust. Been looking at the attak exhaust as well from borla.

@mikecastleberry9671

Жыл бұрын

Sound not shit if you don't make more hp then headers cats then go from there all that noise and no go get smarter man use your money wisely

Awesome videos 📹 👌.

@Donslife

3 жыл бұрын

Thanks Michael!

Hey Don - just curious...what made you go with this version versus the true dual?

All looking good but the lights of the license plate, they have to be LED my friend! Please I'm still look for an answer

Damn Don nice setup! Now i need to get rid of these hdmi and get a borla setup too 🤤

@Donslife

3 жыл бұрын

Thanks Steven 🙏🏻

do you know, or do you still have the Factory exhaust tail pipe section in garage somewhere, what the diameter of the exhaust is, for tailpipe section (left or right). Is it 3 inches or 2 1/2 or something else? Thanks.

the camera audio never does it justice..trust, as a borla exhaust owner on an at4, it sound sooo much better in person

@Donslife

3 жыл бұрын

ABSOLUTELY!

i have it on my also,,,but the "ATAK"😂👍❗

Looks and sounds amazing. Gorgeous truck. What size tips are those tail pipes?

@Donslife

2 жыл бұрын

Quad 3.5” black chrome tips! Thanks for checking out the video!

Just put headers with hi flow cats already installed on headers called green headers two separate pipes and use your old resonates and buy your quad black tips the 6.2 will gain 70 hp and not much louder and if you want it quiter and get some longer res resonators all for 4500 welded on 70hp plus your pulsar lt 140 mpr in 10.05 quarter mile not bad for a 5400 pd truck 😊

@mikecastleberry9671

Жыл бұрын

10 4😮

Where did you get you’re gloss black/carbon badges? Also, did you powder cost rims? I have the 20’s with two tone black and Crome, and want all black. Love the exhaust! Can’t wait to get it for my 6.2 AT4!

@Donslife

2 жыл бұрын

Hi there! Loving the exhaust too. Best aftermarket truck exhaust I have ever had. I have videos on the badges and the wheels. All done with Hyperdip. Just have a look at my channel for the last 6 months of videos. There’s a ton of AT4 stuff

Sounds great!! Two questions…do they sale this exact but I but shorter if I want to keep the square tips? And my other question is did you go with a darker tint on your side marker on your headlights?

@Donslife

3 жыл бұрын

Hey Marco! yes they do have one that will fit with the factory tips. Yes I went with the dark smoke tint vs the light smoke. Same process so I didn’t film it

Nice video!! I'm still on the fence on the s-type or the touring one

@Donslife

2 жыл бұрын

The S-Type has a loud cold start, but only for a few seconds. I am pleased with the s-type. Not loud at all when cruising.

Great video, very informative, love your content! Do you wonder what it would have been like if you would have gone with the ATAK instead of the S-Type? I am on the fence and don't know which one to go with for my 6.2 CarbonPro... Any input would be great, from you or the chat.

@Donslife

3 жыл бұрын

Well I think the ATAK would be too loud for me. The S-Type has a resonator that can be deleted with a straight pipe and you’ll end up with an ATAK setup. Or you can buy the ATAK and a separate stype resonator to add at anytime (2019-2021 gmc sierra 1500 Connecting Pipe S-Type Part # 60679)

@sendog1020

3 жыл бұрын

ATAK all the way , I have it on my 2020 at4 6.2L with a S&B CAI SOUNDS GREAT 🔥🔥

@Ac-go3ke

2 жыл бұрын

Hey which exhaust did you go with.

Is it much louder than the gm performance package exhaust? just wondering if I should make some changes or keep the set up. Your truck had a lot more treble though. I like it! Love what you did to your AT4 too!

@Donslife

3 жыл бұрын

I don’t know first hand, but from my own research the GM performance upgrade is closer to the Borla Touring set up. The touring set up is more subdued compared to my S-Type. The ATAK version is the loudest. Thanks for the truck compliments!

Hey Don, anything done to resonators?

I’m going to get this same exhaust! I love the way it sounds and the tips are awesome! Black chrome! Do you still have this exhaust on your truck ?

@Donslife

Жыл бұрын

Yes I do!

Hey Don, love the AT4. Have you heard a Borla Touring on the 6.2? Can’t make up mind between the Sline and Touring. Did you look at the Sline in the true dual? Thanks for the help!!

@Donslife

2 жыл бұрын

I haven't heard the Touring for my truck, just a 5.3. It was an improvement from stock if you are looking for a little more grunt, but it does not compare to the S-Type. Neither drone which is really good, but to have the S-Type, you have to be okay with grunt every time you accelerate. Even feathering the throttle, you'll hear it. Also if you have a risk with annoying neighbors during cold starts, the touring is probably your safe bet. Mine roars like a lion for the first few seconds and then tames after warming up. As for the true dual - No I haven't heard one. I only looked into Cat-Back systems with a single connection

Hey Don, when you have the sound clip out the back of AT4, is your mic on the inside of cab or on the outside on your bed cover? Thanks for all your help!

@Donslife

2 жыл бұрын

It was recorded out of the open rear sliding window with an iPhone. There is a video later that is recorded with a GoPro on the tailgate. It is the DFM video.

great video is there any issue with exhast sensers ? or check engine light coming on ? want to put his on my 2022 at4

@Donslife

2 жыл бұрын

Not experiencing any sensor or check engine light issues at all sir

I had a 6.2 at4 with an atak on it. It was actually too loud, particularly on cold start. Felt bad for my neighbors a little. This sounds good.

@Donslife

Жыл бұрын

So many people suggest I should have went with the ATAK! 😂 I think it is easy for them to say but harder for me to live with and keep neighbors happy 😃

@idratherfly2000

Жыл бұрын

@@Donslife I live in a neighborhood similar to yours Don. Would you say the S-Type is annoying to the neighbors? Im debating getting the S-Type but dont want to be “That Guy”. So possibly thinking of the Touring instead. Your thoughts?

@Donslife

Жыл бұрын

Tough call. I would say there are 3-4 of us on the block and mine sounds the best in my opinion. It is certainly a concern during cold starts. My immediate neighbors are cool so I think it depends on the temperament of those around you. My fear was the Touring would be too quiet. I know my answer probably doesn’t help

@mikecastleberry9671

Жыл бұрын

F the neighbors

I'm looking at pretty much the same setup you have. I have the same S&B intake on my 2020 6.2L TB and I have gone back and forth on the Borla Touring and S-Type. Did you happen to record any in cab, decibel readings for the stock exhaust and then with the Borla S-Type?

@Donslife

2 жыл бұрын

No decibel readings sorry man

This dude makes me wanna spend all my cash.

@Donslife

2 жыл бұрын

Oops 🙊

@UBBlifestyle

Жыл бұрын

I’m about $2k in and I haven’t had my truck a week. And I’ve only watched about 10 of his videos.

@Naoj2024

11 ай бұрын

WHAT ABOUT THE 6.6 DIESEL UPGRADE ..?😮🏁🇺🇸… REAL GREAT SOUND ON YOUR 6.2 ❤️

nice!

I too put a Stinger cat back on my Silverado 5.3 with twin black tails coming out the side. I believe you pick up about 10 HP with it.

Do you have a video on the install of the auto start stop eliminator? Thanks!

@Donslife

2 жыл бұрын

kzread.info/dash/bejne/eHullJd-Ysm4h7g.html

Hey don, I know you have probably gotten this question about 300 times now but I’m going to ask just for my reference. With this borla S-Type system, is there much drone in the cabin when cruising say 50 and above? This truck will likely be my next vehicle if I can’t get a 1SS 1LE which I’m hoping for. But if not trail boss or at4. And how happy are you with the exhaust now after a couple of months after it’s broken in? Any leaks? How’s it holding up to our Canadian winter? It’s 304 stainless right? Thanks Don love the videos and keep it up!

@Donslife

2 жыл бұрын

Ah the drone question. Just to make sure my definition of drone matches yours. I had a Magnaflow on my 6.2 Denali and it would hold an annoying midrange tone/frequency when at highway speed and low engine load. So a loud humming that you could almost feel. The Borla S type can be heard at all times, but has not come close to droning. I can have a conversation with the family overtop of any exhaust noise. I can even record videos and it doesn’t cause issues. No leaks either and when I take it to the carwash they tubes I can see come clean. 304 Stainless for sure. It settled a little after a month and I just adjusted the tips, super simple.

Hey Don, did you ever tow a 7k lb cargo trailer with that AT4? If so just wondering how well it did. Or any other trailer that weighed close to 7k lbs or more. I have a 2016 2500HD Chevy with the duramax and a 6 speed trans. I want to switch back to a gas engine and your truck is what I would buy. Just wondering how it tows the heavier stuff. I've seen you towing your boat before but I tow a 16' cargo trailer with 7k lbs behind the truck every day for work. Do you think your truck could handle that?

@Donslife

3 жыл бұрын

Making the trip with 7500-8000 pounds this weekend. May take a couple weeks to come back and edit it all for the viewers though. My truck would handle it. Just more wear on tires and burn more fuel

Hey Don, want to get the GMC illuminated badge. Have you received your second one? How are you going to keep water out of the connector’s? I assume that’s went wrong with your first one.

@Donslife

Жыл бұрын

Nothing yet. Still on back order. Water didn’t get into the connector. Moisture crept in between where the clear lenses meet the backing plate. I’ll come up with a plan when the next one arrives….if it does

Do you think it’s worth waiting on the refresh model or should I pull the trigger on 2021? I do like the bigger screen idea but just wondered your thoughts on it all

@Donslife

2 жыл бұрын

That’s a personal decision my friend. For me it came down to waiting and with all the delays and limited selection currently, it worked out I think. I think we still have a solid year of these chip issues, if not more.

Sounds good! Nice deep tone. I definitely like the stock tip fitment in the bumper better.

@Donslife

2 жыл бұрын

Good news, they make the same exhaust in a version that uses the factory exhaust bezels.

@erickcardenas1416

2 жыл бұрын

@@Donslife would it sound the same?

@Donslife

2 жыл бұрын

I think it would

do u have a drone at 75-85mph I had s-type and had a drone also have lt pulsar which turns off dfm 6.2 motor went back to stock muffler now thinking about gm performance exhaust which basically is borla touring exhaust

@Donslife

2 жыл бұрын

I can’t say that I really do. I don’t tow at those speeds so it stays very quiet. Of course it has some tone to it and is louder than stock

Don have you noticed that the tips have settled and been pushed out some? Maybe I didnt tighten one of the clamps enough. Upon install the tips sat just fine, now they have pushed out some.

@Donslife

2 жыл бұрын

Yes they did a little, I backed all of the bolts off slightly and made sure all of the hangers looked well-placed. Then tightened it all back up and did the tips last. Now they are even again and haven’t moved

Hey Don - first time thinking about exhaust on my truck (2019 6.2 high country) and a little hesitant. I know I could have it welded or clamped, but is it at all possible to remove the factory exhaust without any cutting (in case my wife doesn’t like it 😬)? Love your content!

Hey Don, have you put in the JLT catch can in your truck? Thanks!

@Donslife

2 жыл бұрын

I want to, just been busy

Hey Don, did you find anything new on the AT4? Did you put the S CAI back on or you still running the stock unit?

@Donslife

2 жыл бұрын

Hey John! Thanks for checking in! S&B has bee recently reinstalled - nothing to report yet as it has only been a short time with little variety in driving. I will provide an update hopefully around late February.

Sounds great 👍🏻!! where did you order it?

@Donslife

3 жыл бұрын

Through a local shop that has access to Borla

Hey Don, did you ever get a check engine light when you installed the Cold Air Induction unit? Thanks for all the information!

@Donslife

2 жыл бұрын

No check engine lights with any of my intakes S&B and Cold Air Industries have been solid. Disconnected the battery for 2 hours and while installing, made sure the MAF sensor was clean and handled carefully, then once I started the truck I turned off the air filter monitor in the system menu

@johnaragon3314

2 жыл бұрын

Have you gotten the Pulsar tuner yet? Also, can you tell when the DFM kicks in and out with the exhaust? Thanks for the help!!

@Donslife

2 жыл бұрын

@@johnaragon3314 I haven’t made the PulsarLT a priority purchase. Coasting and braking I can hear the DFM kicking on and off. I usually just drive in L9 now around town and D on the highway. When I get new wheels, I might get the PulsarLT to calibrate the speedo and disable DFM

Hey Don, if you don’t mind me asking, where did you get your Borla exhaust and what kind of price break did you get? Thanks!

@Donslife

2 жыл бұрын

I live in Canada and ordered it through my friends local shop, which he ordered from one of his distributors. My specific one (quad tips) cost about $1710 Canadian + taxes.

Hey Don, what brand catch can do you like? JLT or UPR? Thanks!

@Donslife

2 жыл бұрын

I like them both. I haven't installed one yet, but the UPR I feel has some nice customization options compared to JLT

Hey Don, kinda just learning about these things. My question is, why is it better to do a full exhaust replacement instead of just a muffler swap?

@Donslife

Жыл бұрын

Usually the pipes are larger diameter than stock which allows more air flow to the muffler and resonators in some cases are replaced as well. With a replacement it is usually better do avoid drone at certain RPMs. That’s not to say the perfect muffler only replacement won’t work for you

Does this fit on a 18?

Hey Don, wondering if you are going to get the Pulsar tuner any time soon?

@Donslife

2 жыл бұрын

No I don’t think I will until I need to use the speedometer calibration for larger wheels/tires

Hey Don, what made you pick the Borla exhaust over an MBRP one? Still trying to get as much information before pulling the trigger. Thanks for the knowledge!,

@Donslife

2 жыл бұрын

Hi John! A big influence was my neighbor who had the s-type on his 2015 5.3 Silverado. The second was nobody ever seemed to complain about Borla (around me anyway). Third, I have a friend that had a good hook up for me to get a Borla setup for a reasonable price. Lastly, I haven’t had the opportunity to hear many others. I used to have Magnaflow on my last 6.2 and it was awesome except the drone at highway speeds was getting old

@johnaragon3314

2 жыл бұрын

Have you heard anything negative about MBRP exhausts?

@Donslife

2 жыл бұрын

@@johnaragon3314 No I haven’t. The only hard part for me was not being able to hear a setup from MBRP on a GM motor.

I have the 2020 elevation. Would these work for the 5.3 or are there specific ones?

@Donslife

2 жыл бұрын

Borla has a few options for you. Their website is good to help figure it out for you

Hey Don, do you know anyone that has the Brembo brake upgrade on their truck? Is it worth the money? Thanks again for your help.

@Donslife

Жыл бұрын

I don’t know anyone personally, but I think we’d have to define ‘worth’. I can imagine if you are heavy towing they would make you feel pretty safe. I don’t think they would help a lot with the resale. Wouldn’t hurt, but wouldn’t get your investment back

Sounds awesome! Which tonneau cover do you have? Do you like it?

@Donslife

2 жыл бұрын

I have the one GM sells right from the dealership. It is made my Rev industries, but it appears to be a rebadged BAKFLIP cover. I really like it. They are super light construction now compared to the past. I made a video of the full install in the AT4 playlist

@tfa8rva

2 жыл бұрын

@@Donslife Cool, Thanks! I'll check out that install video! Been looking to get one.

any updates with the spacers? all still good? how many miles with the spacers so far? The exhaust sounds crazy good by the way!

@Donslife

3 жыл бұрын

Over 3000 miles on the spacers. No concerns at the moment. Loving the exhaust right now. Doing a big tow trip over the next couple weeks and I will share my findings

@jonathanm.2151

3 жыл бұрын

@@Donslife ....sweet. your truck looks amazing, good work.

Sounds amazing! How loud is it in the cab towing your camper? I'm in the Markey for an RST with 6.2, I tow a 26' Rockwood Mini-lite 6 or 7 times a year. I live in east Tennessee so I have more hills probably. Just don't want to drone out the family on trips. Beautiful truck, btw.

@Donslife

2 жыл бұрын

Thanks. Compared to the Magnaflow I had on my last 6.2, this is so much better. Little to no drone when towing heavy. Of course you can hear it, but the tone you are avoiding is not there

What was the trick to get your tips to align perfectly.. I have same kit.. Having a heck of a time getting them even side to side.. Sounds mean though

@Donslife

4 ай бұрын

Loosen the other joints, not just the tips. Drive around, let it settle, try again and fine tune the tips last

@jramsoil

4 ай бұрын

My passenger side tip is probably set back a half inch or more.. Kinda bugs me.. Easy install just wish they was lining up better

Hi really like watching your videos on your truck. I have one ordered and wondering where did you Get your Borla exhaust from?

@Donslife

2 жыл бұрын

Thanks! I ordered it from a shop in Saskatoon. He ordered it from a distributor in Edmonton, Alberta. It took several months to come in. If you are in the US this information won’t be helpful

@travisjesso9415

2 жыл бұрын

@Donslife thanks alot buddy 👍 I live in Newfoundland. Again thanks for all your videos enjoyable and good info

@Donslife

2 жыл бұрын

Beautiful part of the country! Made it out that way many years ago!

@travisjesso9415

2 жыл бұрын

@Donslife oh awesome glad you enjoyed it. I looked it up at a shop in Edmonton and nothing for 2022 at4 only 2019-2021 Now having said that it should fit, may have to call them to make sure.

Do you think you made a lil more power out of it? Did it feel different throttle wise

@Donslife

3 жыл бұрын

I am gonna answer ✅ and ✅. Remember I have a good intake too

Between this and the S&B intake how did it affect your insurance? I’m thinking of doing the same setup

@Donslife

Жыл бұрын

No issues with insurance premiums with the intake or the exhaust

Anyone know if i install these on my truck it will get pass on inspection? Im from Massachusetts they pretty much dont like anything aftermarket here 🤣🤣

@mikey42082

2 жыл бұрын

It depends. Being a cat back it is allowed in mass.....however the law also states its not suppose to raise the sound of the exhaust to much higher then stock volume. So it comes down to really who is doing the inspection and whether or not they pass it. I know in western mass you wont have problems. Its the crazy loud exhausts that they look at, my buddy has the atac which is louder then this one and passes with it no problem

How do u know which way to put the exhaust. Does it matter.

@Donslife

6 ай бұрын

The ‘B’ should face the front of the truck and the ‘A’ towards the rear in the word ‘BORLA’ stamped on the muffler

Nice How did you do you GMC grill emblem??

@Donslife

Жыл бұрын

Right here my friend: Illuminated LED GMC Sierra Emblem / Badge Install. Genuine GM Part kzread.info/dash/bejne/ZIWWxcOzc63RfLw.html

Question what's the part number for that exhaust? Because I'm looking at the same one and the part number I'm getting is 140773 my truck is a 2021 Sierra 1500 6.2

@Donslife

2 жыл бұрын

Mine is part #140774BC (BC = Black Chrome Tips). Yours uses the factory HDMI shaped tips

@dannyv9904

2 жыл бұрын

@@Donslife Ok that makes sense because I wanted to go with factory tips cool thanks for the quick reply and ty for sharing

Nice Sound. Did you install the exhaust before or after you installed the Pulsar LT? I was wondering if the DFM was noticeable at all?

@Donslife

2 жыл бұрын

I don’t have the Pulsar LT yet. I shift to L9 for now when driving under 60mph and DFM is disabled. It is very noticeable when DFM is on when coasting or decelerating.

I don't understand the dislike of auto start/stop. I don't even notice it on my 6.2. Can someone please explain the dislike?

@Donslife

11 ай бұрын

Well I can tell you with an aftermarket exhaust it would be a nuisance with the loud starts

What size duel tips are those ? They look perfect thx

@Donslife

2 жыл бұрын

Dual 3.5” Black Chrome. The full install and review is linked in this video too if you want to see more

@rickyleroy7795

2 жыл бұрын

@@Donslife thx

Did you notice any performance gain with the exhaust? It sounds great! 👍👍

@Donslife

3 жыл бұрын

I absolutely ‘feel’ a performance gain. However I am still in the honeymoon stage and will possibly do some tests down the road.

Hey Don, I have a 2020 AT4 & just now looking into exhausts Borla is the top contender, but what was your deciding factor between the S-Type & the Atak ?

@Donslife

6 ай бұрын

I didn’t want to be too loud in the neighborhood I live in

@21Stevenp

6 ай бұрын

@@Donslife Hypothetically speaking, you were always considering an Atak but out of courtesy opted for the s type instead. Such a tough decision. Any idea what the decibel difference between the Atak and the S type ? Or if the drone is bad in the Atak?

@Donslife

6 ай бұрын

@@21Stevenp I don’t think any of them drone. I just didn’t want a super loud system. You can convert an ATAK system to S-type after the fact too. Right from borla

@21Stevenp

6 ай бұрын

@@Donslife Thank you Don. Keep up the amazing work!

Auto stop eliminator installed?? Isnt that the button that is on all trucks from factory? Or did you do something extra for that system.

@Donslife

3 жыл бұрын

It has the auto stop/start enabled by default every time your start the truck. The ‘eliminator’ let’s you choose the setting to be on or off by default when you start the truck. It remembers your setting. Yes I know I could just push the switch every time I get in the truck. My two other vehicles have auto stop/start but it is off by default and I would prefer my truck to be this way. I just don’t want my truck firing up again at every stop, especially with a more aggressive exhaust.

@theone-ti4rt

3 жыл бұрын

@@Donslife and where or how do i get this eliminator you speak off? It sounds like something i might look into for my vehicle

@Donslife

3 жыл бұрын

I made a video on my channel and the link to their website is in the description. It won’t let me put links in the comments here. In this Borla video I put a short cut link in the scene I am talking about the eliminator

@Donslife

3 жыл бұрын

This is the video name: Auto Start Stop Eliminator / Bypass GMC Sierra AT4. Full Review and Installation!

How tall are you? And hows the legroom behind the wheel.

@Donslife

3 жыл бұрын

6’1” Lots of room for me and I don’t have the seat all the way back. Probably best to go sit in one at the dealership if you can find one

Don, just curious why you didn't go with the true dual exhaust vs. single pipe?

@Donslife

Жыл бұрын

I wanted a cat-back exhaust that would use the same routing as the factory set up. A true dual would also benefit from a tune, which unfortunately is not available for these locked ECU’s. (At least at the time I ordered this exhaust)

@Wrexxxx

Жыл бұрын

@@Donslife benefit from a tune as in it really needs one?

@Donslife

Жыл бұрын

It wouldn’t ‘need’ it but if your removing the catalytic converter and going true dual from the headers, a tune would certainly help get the most of the less restricted flow

@Wrexxxx

Жыл бұрын

@@Donslife ok the converters stay intact, you make the cuts about two inches behind them, then go dual. That being said, That makes me feel a bit better because I hold your opinion kinda high with all the great content you have. I’ve heard a few sources say it sounds pretty much like your single, than another guy said he welded the factory resonators back in because he didn’t like the sound…which is something I’d rather not deal with. Now, out to buy a Dremel because I’ve ordered the grille insert you did lol!! Should be here tomorrow.

Did it give you any error codes or dash lights ?

@Donslife

Жыл бұрын

None at all

It has the muffler and resonator right after?

@Donslife

3 жыл бұрын

Ya, essentially you can delete the resonator and have pretty much the Atak version of the exhaust