How to replace rod bearings and measure bearing clearance using plastigauge.
Жүктеу.....
Пікірлер: 38
@AlexandreOliveiraAlex Жыл бұрын
Excelent work... thank you Woody's...
@roykropper2239 Жыл бұрын
This is the best channel for bmw engine teardowns I've come across. Very very informative
@vancouverislandsingletrack563 Жыл бұрын
Great video!
@mrtokyo1989 Жыл бұрын
Nice! Hope for more videos :D
@bruhannyanzi1660 Жыл бұрын
I like ur staffs man
@mickeypopa4 ай бұрын
Thanks Woody!
@ivanpane34636 ай бұрын
Can You help me with the torque settings of the conrod please!!
@catalinnica7113 Жыл бұрын
Hello, for bearing shell do you used OEM bmw or aftermarket? Thanks
@vladislavmarunin143110 ай бұрын
What’s sings of wearing of rod bearings and timing chain , just got f15 n57 with 92k miles
@leighyarnall7346 Жыл бұрын
Hi mate going to do my n47 can you give me where to get parts used for rod bearings timing chain kit and timing tool kit please Merry Xmas lee
@giannister14 күн бұрын
Can this be done without the engine coming out
@johnmorrison9072 Жыл бұрын
How many miles was on the engine? It would help me decide on whether to do mine.😅
@123heraz Жыл бұрын
where to buy engine bearing clearance guage link please
@edgaraseskis84466 ай бұрын
Why this measuring with plastic gauge are needen? I can't understand, what we should do with this information?
@jake6084 Жыл бұрын
Just wondering whether when installing the bearings you should be putting on assembly lube on both sides? Wouldn't you just have lube on the side that contacts with the crankshaft and leave the side that contacts with the rod dry? I'm thinking putting oil/lube on the rod side would increase the risk of a spun bearing?? Thoughts everyone?
@nemz7505
Жыл бұрын
I've always left the back dry, assembly lube on bearing surface only. Greater risk of the bearing spinning if you lube the back.
@radimgrosek725510 ай бұрын
How much this cost
@brarautorepairs Жыл бұрын
I like to gamble. Slaps in rod bearings.
@rockfordwoods5432 Жыл бұрын
Rod bearings are not same top and bottom. You did not cover that. S or sputter goes into the rod end, unmarked goes in the cap.
@TheDobbins39 Жыл бұрын
What's the torque settings for the bolts
@bimmerwrecker1513
8 ай бұрын
for brand new shoul be 30nm and 70+70 degree
@kirilakmadjov8307
4 ай бұрын
@@bimmerwrecker1513 this is actually false the torque is 20nm and then 70degree angle only
@beerwrenchgarage11 ай бұрын
Hey Brother - I think Im local to you and I got some E70/N57 questions. Im going to shoot you an email - would appreciate your input!
@vladislavyanakiev333 Жыл бұрын
What is the mileage on this engine?
@sebastianmiticky2491
Жыл бұрын
dont buy car with this engine if you dont have 3000€for rebuild
@marianogambardella668
8 ай бұрын
@@sebastianmiticky24919000€
@guesswho6906
7 ай бұрын
@@sebastianmiticky2491 but what if you change main bearings and all the stuff? i heard it can last long if u change them every 60-70k , also, first time when the car gets fucked, it will get fucked every next time you rebuild it, only solution is the new engine.
@tamur1994 Жыл бұрын
Big issue with n57 are the main bearings, not rod bearings
@bimmerwrecker1513
8 ай бұрын
american people dont know how to fix bmw, espetially diesel,,,,,
@guesswho6906
7 ай бұрын
yeah, had one , it flipped bearings tottally and died :D
@bimmerwrecker1513
7 ай бұрын
@@guesswho6906 oil Pump, and main bearings needs to be replaced. Bmw usually installs kolben Schmitt, but in this engine the put unknown main bearings.
@guesswho6906
7 ай бұрын
what a stupid misstake lol, btw. which bearings should i put on? also how much is the oil pump?@@bimmerwrecker1513
@Mymerguez Жыл бұрын
my rod bearing was like new but main bearing was used...
@Mymerguez
Жыл бұрын
n57 230k km
@guesswho6906
7 ай бұрын
did u change them?@@Mymerguez
@bimmerwrecker15138 ай бұрын
main bearind will fail.this engine has bad main bearings from factory
@guesswho6906
7 ай бұрын
yeah, what is to do to prevent it?
@DubSalvation
6 ай бұрын
@@guesswho6906change them to new ones and change oil frequently
Пікірлер: 38
Excelent work... thank you Woody's...
This is the best channel for bmw engine teardowns I've come across. Very very informative
Great video!
Nice! Hope for more videos :D
I like ur staffs man
Thanks Woody!
Can You help me with the torque settings of the conrod please!!
Hello, for bearing shell do you used OEM bmw or aftermarket? Thanks
What’s sings of wearing of rod bearings and timing chain , just got f15 n57 with 92k miles
Hi mate going to do my n47 can you give me where to get parts used for rod bearings timing chain kit and timing tool kit please Merry Xmas lee
Can this be done without the engine coming out
How many miles was on the engine? It would help me decide on whether to do mine.😅
where to buy engine bearing clearance guage link please
Why this measuring with plastic gauge are needen? I can't understand, what we should do with this information?
Just wondering whether when installing the bearings you should be putting on assembly lube on both sides? Wouldn't you just have lube on the side that contacts with the crankshaft and leave the side that contacts with the rod dry? I'm thinking putting oil/lube on the rod side would increase the risk of a spun bearing?? Thoughts everyone?
@nemz7505
Жыл бұрын
I've always left the back dry, assembly lube on bearing surface only. Greater risk of the bearing spinning if you lube the back.
How much this cost
I like to gamble. Slaps in rod bearings.
Rod bearings are not same top and bottom. You did not cover that. S or sputter goes into the rod end, unmarked goes in the cap.
What's the torque settings for the bolts
@bimmerwrecker1513
8 ай бұрын
for brand new shoul be 30nm and 70+70 degree
@kirilakmadjov8307
4 ай бұрын
@@bimmerwrecker1513 this is actually false the torque is 20nm and then 70degree angle only
Hey Brother - I think Im local to you and I got some E70/N57 questions. Im going to shoot you an email - would appreciate your input!
What is the mileage on this engine?
@sebastianmiticky2491
Жыл бұрын
dont buy car with this engine if you dont have 3000€for rebuild
@marianogambardella668
8 ай бұрын
@@sebastianmiticky24919000€
@guesswho6906
7 ай бұрын
@@sebastianmiticky2491 but what if you change main bearings and all the stuff? i heard it can last long if u change them every 60-70k , also, first time when the car gets fucked, it will get fucked every next time you rebuild it, only solution is the new engine.
Big issue with n57 are the main bearings, not rod bearings
@bimmerwrecker1513
8 ай бұрын
american people dont know how to fix bmw, espetially diesel,,,,,
@guesswho6906
7 ай бұрын
yeah, had one , it flipped bearings tottally and died :D
@bimmerwrecker1513
7 ай бұрын
@@guesswho6906 oil Pump, and main bearings needs to be replaced. Bmw usually installs kolben Schmitt, but in this engine the put unknown main bearings.
@guesswho6906
7 ай бұрын
what a stupid misstake lol, btw. which bearings should i put on? also how much is the oil pump?@@bimmerwrecker1513
my rod bearing was like new but main bearing was used...
@Mymerguez
Жыл бұрын
n57 230k km
@guesswho6906
7 ай бұрын
did u change them?@@Mymerguez
main bearind will fail.this engine has bad main bearings from factory
@guesswho6906
7 ай бұрын
yeah, what is to do to prevent it?
@DubSalvation
6 ай бұрын
@@guesswho6906change them to new ones and change oil frequently