Great video and very well explained, now I'm encouraged to do it myself!! Congratulations from Argentina.

Dude can u turn off the headlight so we can see the halo.?

Nice to see you don't have to swap the housing. When swapping nautical lights to aftermarket LED there are many complicating features such as field of projection, heat absorption, luminosity and color temp that complicate the swap. It looks like the OEM option has designed the new light to balance all of those factors.

Good job on doing all this one handed while filming.

Just what I needed. Thank you!!!!

Thanks for the video, I repaired the wires in the same manner

Can you use black electrical tape instead of RTV? Thanks, awesome video.

Have a 2008 550i, the halo bulb burned and the socket where it goes as well inside the headlight. Do you know how to replace the angle eye halo assembly. The retaining ring is loose inside the headlight and cant find a way to get this out! Appreciate your feedback. Roberto

usefully video thank you eric

what type of led halo upgrade lights did you use?

I came across the poor wire sleeves, and what I did was cut the wires, slip heat shrink the length of each end and butt connect the ends with heat shrink butt connectors and it came out perfect without the RTV mess. I also zip tied the wires away from each other to prevent incidental contact. My way may take longer, but I hate the mess of RTV. Good video demo though.

Good trick to keep those wires from eventually shorting out!

@ADVANCEDLEVELAUTO

2 жыл бұрын

Quick and messy, but it works!

Can you tell us what kind of bulbs use in these video and where did you purchase them, give us a link. Thanks

Where did you purchase the LED replacement lights

Great job

Where you bought the led angel eye.. amazon?

BMW - we like doing things the hard and expensive way.

Do you know how many watts it’s the correct bulb for this BMW headlight?

What size is the bulb and is their a specific one to get?

Nice helping video

Curious...why did you take 3 screws out on the top? Only 2 hold it in...I see you have bigger hands like me, need skinny guitar fingers, makes it easier

0:13 5 Series

@ADVANCEDLEVELAUTO

6 жыл бұрын

Yes. My mistake. I didn't realize what I said until I posted the video.

@MrAsdfcool

6 жыл бұрын

ADVANCED LEVEL AUTO all good✌

Is there any bulbs that have brighter output ? I just picked up a pair of angel eye led , similar to these in the video , it’s bright but not like the new BMW’s... Is it even possible to get it as bright as the newer models?

@1mitchmugga

3 жыл бұрын

Gotta get HID CONVERSION KIT"

good demonstration. Man! i wanted to reach in my screen to give you a hand. lol. get a tripod next time. lol.. thanks

@ADVANCEDLEVELAUTO

5 жыл бұрын

Yea I finally got a tripod lol thanks!

Thanx 4 d video..

How long is the drill extension you used?

Did you have to buy the ring too?

What kind of RTV sealant did you use

Is this consider the "PARK LIGHT" i get a message that my driver side park light is not working

@vinnytalks_

3 жыл бұрын

same, i'm trying to figure it out cause mine aren't on

10:45 or you could use electrical tape or Tessa tape

Link to the bulbs you bought?

Thank you

Now headlight needs aiming?

What brand of led is it

I currently have a 2005 BMW 530i that needs to have the passenger side Angel eye replaced. I plan on getting that done soon, but right now I keep getting a RIGHT FRONT PARKING LIGHT MALFUNCTION chime/message on my I -Drive screen which is really annoying. How can I silence this chime so I do not have listen to it, until I finally can get the needed work done ? I would appreciate any help you can give me

@msparkyauger

4 жыл бұрын

replace the bulb

@ELCHACA

4 жыл бұрын

Sean... I have the same model as urs... I get the same msg... Just to make sure, is this the light bulb that is Burn?

You said it's a 3 series?

Do you have some link of these bulbs? Hiw is strong? Watt?

@FRENCHYRIDER

5 жыл бұрын

I think i found them....not sure. The picture of the bulb on the site looks different than the one he holds in his hand. www.ecstuning.com/b-ziza-parts/h8-led-angel-eye-bulb-set/003584ziz01a/

Hello. I wanna know that: its just one light for both halo rings?

@marcusokodugha2101

5 жыл бұрын

yes one light confirmed

Does anyone know can i change eyebrow light

Each headlight used one bulb or two bulbs ? I see two angel lights in each headlight.

@ADVANCEDLEVELAUTO

4 жыл бұрын

Just one bulb lights both halos.

@catblueeye

4 жыл бұрын

ADVANCED LEVEL AUTO ok thanks

nice

Bulb h8 ?

Liquid electric tape. Has a brush in the lid, just dab it on.

any link to buy that led ??? , can it fit to 6 series (2005) ??? THX

@FRENCHYRIDER

5 жыл бұрын

www.ecstuning.com/b-ziza-parts/h8-led-angel-eye-bulb-set/003584ziz01a/ Okay, so this link from ECSTuning is actually for different models of E60. The other link I provided from Turner Motorsports is also for E60, just for different models. Check fitment.

The xenon ist a beautiful white It is 5000k

Wat size is the bulb for the halos?h8 or h11 for 07 530i

@botsopjekar

5 жыл бұрын

Probably w5w.. on my 2003 e60 it is a w5w bulb

Think I would have spent just a few more minutes to separate those wires and cut soldered and shrink tube them it’s the electronic engineer in me.

Link?

whats the part number?

I won't use RTV silicon, wrong purpose. Quick work around should go for heat shrink Tubing with zip tie.

3 series? Description says 530i...

Great Video, but you never gave a link for the product 😹😹

Ange

Forget about rtv use electrical tape

hi can you please give a link to the new bulb

@FRENCHYRIDER

5 жыл бұрын

I also would like to know where to find these bulbs.... as well as the bulb size.

@FRENCHYRIDER

5 жыл бұрын

I think these are them.....box looks the same, but the picture of the bulb looks different than the bulb in the video. www.ecstuning.com/b-ziza-parts/h8-led-angel-eye-bulb-set/003584ziz01a/

@FRENCHYRIDER

5 жыл бұрын

www.turnermotorsport.com/e/p-377481-led-angel-eye-bulb-set/ this one looks like a match

@Skid_Marks69

5 жыл бұрын

thanks

That paste name

easy install? lol i wouldnt even dream about doing this.

Lol.... 3 series huh? :p

@ADVANCEDLEVELAUTO

5 жыл бұрын

Yeah...sorry about that lol

*says bmw uses bad wires... yanks bulb out by harness* 😂😂

@Earlhelder

4 жыл бұрын

🤣🤣🤣

@hafeexius

3 жыл бұрын

The wire insulation does suck. The ones in my e60's headlights literally crumbled away to the touch when I was changing the bulbs. I ended up using electrical tape to insulate everything

ever heard of liquid electrical tape.

I'll see the inside of that headlight in my sleep... It Hurts

just buy a tripod

Flach

these headlights are junk