BMW E46 M3 S54 Rattle Kit Repair & Sprocket Bolts DIY (S54 Vanos Rebuild- Part 4)
Автокөліктер мен көлік құралдары
The vanos is a known weak point for the e46 m3 s54 engine. We address preventative repairs by changing out the oil pump disk with a redrilled one from Beisan Systems as well as replace all of the vanos seals, hub sprocket bolts, spring diaphragms, various o-rings and gaskets, anti-rattle kit, and verify proper timing in this video series.
www.beisansystems.com/
S54 Vanos Service Kit (Seals, rattle kit, tools + more)
click.linksynergy.com/link?id...
Upgraded S62 Spring Diaphragm and Pressure Plate:
click.linksynergy.com/deeplin...
Upgraded Cam Bolts:
click.linksynergy.com/deeplin...
S54 Timing Tool:
click.linksynergy.com/link?id...
S54 Flywheel Locking Pin:
click.linksynergy.com/link?id...
Videos related to e46 m3 vanos:
E46 M3 S54 Vanos Solenoid Cleaning & Replacement: • E46 M3 S54 Vanos Solen...
S54 Vanos Symptoms/Common Issues/Prevention/Repair: • S54 Vanos Symptoms/Com...
How To Change S54 Valve Cover Gasket- BMW E46 M3 Valve Cover Removal: • How To Change S54 Valv...
E46 M3 S54 VANOS UPGRADED OIL PUMP DISK
• E46 M3 S54 VANOS UPGRA...
BMW E46 M3 S54 Vanos Seals DIY (S54 Vanos- Part 3)
• BMW E46 M3 S54 Vanos S...
Shop Appointment Requests/Questions/Merchandise: www.shoplifetv.com
Support my channel by becoming a member using this link: / @shoplifetv
Instagram: @ShopLifeTV
/ shoplifetv
Disclaimer: Due to factors beyond the control of ShopLifeTV, I cannot guarantee against improper use or unauthorized modifications of this information. ShopLifeTV assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ShopLifeTV recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ShopLifeTV, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ShopLifeTV. Disclaimer: The product links provided are often associated with an affiliate. When using any of the affiliate links I may get compensated for any products purchased using the link. This compensation does not affect my views on the product.
Пікірлер: 55
These videos take a long time to film and edit, but I hope I get to help a lot of you. You can support me by buying from the links in the description, becoming a channel member using this link: kzread.info/dron/5jnm5CEnLSEmoQ-ktgAj6g.htmljoin, buying my merch on www.shoplifetv.com , following my vlog channel: kzread.info ,or just subscribing and liking the video! Thank you! Let me know if you have any questions!
@TheST2293
5 жыл бұрын
Do you have a video of replacing e46 engine coolant temp sensor? located at cyl 6 under intake manifold .
@Greenmachine33
4 жыл бұрын
How far are you from Florida? I need someone to do this for me lol
@tonyrunyon375
3 жыл бұрын
@@TheST2293 theres no way around it dude, u gotta take the manifold off to replace that 1. What problems are u having with it?
love it man. e46s are the dream and i recently aquired a e46 with 207,000km no rattles but i am going to do this this winter for peace of mind. thank you man!
Awesome M3 anti-rattle DIY brother and sister!
Definitely watching these videos before I get an E46 M3
Another Excellent video ! Can’t wait for the Finale
@ShopLifeTV
5 жыл бұрын
Thank you! The finale is next week!
this video will help a lot, thanks
Fantastic video. This is my project for this winter. Hoping this repair will take care of slight bogging that my car experiencing in first gear between 2-3K RPM when taking off. Only 30k miles but I am sure my Vanos seals are hard as a rock being 15 years old. Use of the Zip tie is Great idea
Gives me confidence to do it myself, great video!
@ShopLifeTV
5 жыл бұрын
Awesome! Thank you
I love your channel and vids. They are always fantastic. So perfectly done, you describe every detail, there’s no questions about anything. Thanks so much!
@ShopLifeTV
2 жыл бұрын
I am glad to hear that Jason. Thanks for watching and supporting!
Great DIY!
By the way, I wasn’t sure how to pronounce Beisan until I found this in one of their documents. Beisan Systems, LLC (BEE-SAAN) fyi, thanks again.
You take the Fear out of DYI ! German Engineering is so Amazing I just lo ve you Passion ! BTW a few drops of oil in those Splines before finishing locktite I would not recommend running barrings dry to Start !
YOU ARE MY SAVIOR
Thank you for your videos
@ShopLifeTV
5 жыл бұрын
Glad I could help!
Excellent job! Very clear with great pointers...👍🌟🌟🌟🌟🌟
Great videos
this guy was fortunate his hub tabs were intact, one tab was broken on mine but i had but the upgraded Turbo Toy exhaust hub ahead of time lol.
Question on splines ! Should there be some oil added to the Bearings pre assemble !?
great video keep doing excellent work!!!! did your car pass the vanos test afterward?? our car after the vanos beisan service and 288/280 Schrick camshafts change still have not passed the vanos test we have error code 184 which reads: vanos intake position control !!! can you help us??? do you have any idea what might be causing this??? thank you in advance...
Dude thanks for all the great videos!!! I have a question! My son has a 2003 330XI and we can’t keep rear tires on it. It seem to be wearing evenly but the rears are toasted way before the front. It’s so bad that after 4000miles on new tires the rears are 1/2 gone and fronts still like new. If it wasn’t all wheel drive I wouldn’t ask lol Any ideas????
Hey man. Do you by any chance have a crank position sensor replacement video for the E46 M3.
I watch your videos often and you are very informative. I have a question . I own a 99 328 2door and its slow at accelerating 1-3k even 4 its not the vanos its just like sometimes when I start it it has power and rumbles and other times it sounds like fried. Its like aftrr i start it it runs fine for 2-3 minutes and then it loses power in low rpm and also sounds different do you have any idea what that might be thank you.
23:33 when you start doing the timing, the locking pin at the crankshaft stills inside?
Besiansystems
Great vid man, do you happen to have the part numbers for the chain guide bolt washer and chain tensioner washer? Would appreciate it. Thumbs up.
Hey i had my auto trans go out found a local guy parting out a 540i 6sp manual will that transmission even bolt up to the e46
Where can I ask you questions? Because I have a e46 I replaced the brake booster and master cylinder but the pedal hits the floor and there are no leaks. The fluid is still full in the resovior.
Oh with the sprocket removed and the chain off can you use the camshaft alignment tool at that point ?
If i was tackling the VANOS and valve adjustment, which one should I do first?
What is the source for the recommendation to use blue medium strength threadlocker on the hub sprocket bolts? Lang Racing and DrVanos recommend using Loctite 263 Red High Strength Threadlocker. Thanks.
U might consider cleaning your vice off the next time your working on high precision high performance BMW 🎭 parts. Just an observation. Thanks for the vid!
Why do you need the timing tool if you’re just matching the paint marker lines up anyway?
Before you marked everything, your exhaust gear was fully inside the hub. When you started marking things, it was sticking out. Which is it supposed to be and how did you do that?
Its amazing how much more beefier the vanos unit for the s54 is than the m54 for for obvious reasons, just sayin!
What is the name of the company to order the parts for the rebuilding of the Vanos?
Thought I saw a ghost at 1:36!
E39M5 uses the same VANOS setup but I never heard of cam hub bolts loosening. Do you ever run into that problem on the E39M5, or is it because in E39M5 the hub is only driving a 4-cylinder camshaft vs. 6 cylinder in S55 and that is why the problem occurs. Curious to get your thoughts.
13:40 why did you replace those with S62 version ? Do originals cause issues ?
Hello. can you provide the link for the cams sprocket bolts please?
Why has this not been done for the S62 & M62?
Dear friend from where you order this tool kit Please let me know and u have a great day
@ShopLifeTV
5 жыл бұрын
I have the links in the description. Thank you for watching
This job is a very tedious one and I do not look forward to the next time I have to do this. At least you're getting paid =P Timing on these cars is completely different to others, as I've come to find out.
Looks like that engine has had very long oil service intervals. It is so stained inside.
I am a new channel member. If I have a specific question about my car where should I post it?
@ShopLifeTV
5 жыл бұрын
I have a member only community post where you can comment but if you have an email address I can contact you. Thank you for your support!
Turkish subtitle PLEASE !! :(