BMW E46 M3 S54 Vanos Seals DIY (S54 Vanos- Part 3)

The vanos is a known weak point for the e46 m3 s54 engine. We address preventative repairs by changing out the oil pump disk with a redrilled one from Beisan Systems as well as replace all of the vanos seals, hub sprocket bolts, spring diaphragms, various o-rings and gaskets, anti-rattle kit, and verify proper timing in this video series.
www.beisansystems.com/
S54 Vanos Service Kit (Seals, rattle kit, tools + more)
click.linksynergy.com/link?id...
S54 Timing Tool:
click.linksynergy.com/link?id...
S54 Flywheel Locking Pin:
click.linksynergy.com/link?id...
Videos related to e46 m3 vanos:
E46 M3 S54 Vanos Solenoid Cleaning & Replacement: • E46 M3 S54 Vanos Solen...
S54 Vanos Symptoms/Common Issues/Prevention/Repair: • S54 Vanos Symptoms/Com...
How To Change S54 Valve Cover Gasket- BMW E46 M3 Valve Cover Removal: • How To Change S54 Valv...
E46 M3 S54 VANOS UPGRADED OIL PUMP DISK
• E46 M3 S54 VANOS UPGRA...
Shop Appointment Requests/Questions/Merchandise: www.shoplifetv.com
Support my channel by becoming a member using this link: / @shoplifetv
Instagram: @ShopLifeTV
/ shoplifetv
Disclaimer: Due to factors beyond the control of ShopLifeTV, I cannot guarantee against improper use or unauthorized modifications of this information. ShopLifeTV assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ShopLifeTV recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ShopLifeTV, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ShopLifeTV. Disclaimer: The product links provided are often associated with an affiliate. When using any of the affiliate links I may get compensated for any products purchased using the link. This compensation does not affect my views on the product.

Пікірлер: 33

  • @ShopLifeTV
    @ShopLifeTV5 жыл бұрын

    These videos take a long time to film and edit, but I hope I get to help a lot of you. You can support me by buying from the links in the description, becoming a channel member using this link: kzread.info/dron/5jnm5CEnLSEmoQ-ktgAj6g.htmljoin, buying my merch on www.shoplifetv.com , following my vlog channel: kzread.info ,or just subscribing and liking the video! Thank you! Let me know if you have any questions!

  • @Christina-kp8tj

    @Christina-kp8tj

    5 жыл бұрын

    Hey shoplift got some e46 questions about a misfire after I changed the plugs

  • @localFS

    @localFS

    3 жыл бұрын

    do you know what the bolt is above the exhaust side cap?

  • @localFS

    @localFS

    3 жыл бұрын

    got a annoying leak from there right now

  • @quickliqproductions
    @quickliqproductions5 жыл бұрын

    These type of video’s are my favorite♥️

  • @Killian665
    @Killian6653 жыл бұрын

    That inner oring on the first piston is enough to make me wanna take the car to the scrap yard.

  • @MrNicoe36cabrio
    @MrNicoe36cabrio5 жыл бұрын

    A very nice part 3, brother and sister ;-)

  • @ShopLifeTV

    @ShopLifeTV

    5 жыл бұрын

    Thank you!!!

  • @Che1seabluesdrogba11
    @Che1seabluesdrogba115 жыл бұрын

    I went with the beefed up Turbo toy exhaust hub with bigger tabs and used the original pump disk replaced all seals with beisan, solenoid, upper plastic chain guide, mine was broken😨. And all upgraded bolts

  • @arashnejad3536
    @arashnejad35365 жыл бұрын

    hey could you do a diy on the steering angle sensor? thanks

  • @mathewc23
    @mathewc235 жыл бұрын

    Subscribed! Hey can you please give me a recommendation for a jumper to purchase to get my battery going? It’s giving me so many issues and I’ll probably have to replace the battery (2k 😭) It’s for a 2015 M4 and need a recommendation on what to buy , I bought a ctek trickle charger but it seems to be too dead to even charge with that.

  • @tonytuntun860
    @tonytuntun8605 жыл бұрын

    What software you recommend low budget to be able to reprogram basic replacement parts on 3 series 06 and up

  • @bsouza1675
    @bsouza16755 жыл бұрын

    Great vid. 👍

  • @ShopLifeTV

    @ShopLifeTV

    5 жыл бұрын

    Thank you ! 🙏🏽

  • @BplexOnline
    @BplexOnline5 жыл бұрын

    hey i have a question that has nothing to do with the video. I was wondering i have a problem with my X5 2008 4.8 V8 the car runs like rpm goes up and down like crazy we changed the electrique cables everything was good and came back 1 week later, we change therefor change the throttle pedal was good 1 week and came back now its gone again... i realized that when its cold the issue comes but when the temp goes up like 8degre and up no issue. now is it the throttle body or i dont know what else to do. Im about to change the throttle body but i dont want to do it if thats not the issue. the throttle budy on my X5 is an electronic one...

  • @xiaoma466
    @xiaoma466 Жыл бұрын

    Can I use zip tie to replace hose clamp? Thanks

  • @localFS
    @localFS3 жыл бұрын

    does anyone know what the bolt is above the exhaust side cap? i have a leak from there but been trying to hunt down the part forever

  • @el_muchacho_2185
    @el_muchacho_21855 жыл бұрын

    I'm about to do my brake booster next Saturday, it's going to be a pain the butt! 😭😭😭😭 it sounds like water when I press the brake greaaat lol

  • @darrend2035
    @darrend20355 жыл бұрын

    So confused My entire Vanos has all torx bolts ? Even on the outside Was my van is rebuilt by someone else????

  • @michaelwu8511
    @michaelwu85115 жыл бұрын

    Thank you

  • @ShopLifeTV

    @ShopLifeTV

    5 жыл бұрын

    No problem! Thank you for watching !

  • @miguelpalencia9788
    @miguelpalencia97885 жыл бұрын

    Hey man what can I do to fix my transmission it’s slipping I have a 2006 e90 330i ? I know you know a lot about transitions and I really need help

  • @simeonpetkov768

    @simeonpetkov768

    5 жыл бұрын

    Needs new clutch packs probably...

  • @miguelpalencia9788

    @miguelpalencia9788

    5 жыл бұрын

    Its an automatic you think cause I was going to do that but I want sure

  • @markt9438
    @markt94385 жыл бұрын

    Good DIY Video I learned a few things but one thing you said that is totally incorrect there's no way unless those bolts on the sprockets shear off completely can you get a failed motor they are protected by a plate in front of them they have nowhere to go I know because I changed mine out and three of them we're broken and the other three were loose so when he starts making that kind of noise especially at idle it's kind of a shearing metal to metal noise you know you need to go in there and inspect those timing gears and mostly likely it's the intake change out both UCF graded bolts and the right loctite and you're good to go but do not ignore that noise it's not your common rattle or knocking it's a whole different noise beware it can hand grenade and you will lose your motor

  • @ShopLifeTV

    @ShopLifeTV

    5 жыл бұрын

    That is correct, the engine will be toast when ALL of the bolts have sheared off. Thanks for watching!

  • @bsouza1675
    @bsouza16754 жыл бұрын

    I have looked and looked for BMW E46 M3 S54 Vanos seals Part 1, Part 2 and I can’t find them....can you provide a link??

  • @G33ZiM3

    @G33ZiM3

    4 жыл бұрын

    Did ya find part 1 & 2?

  • @bennetbernhard9351
    @bennetbernhard93515 жыл бұрын

    M54B30 TuRbO PlZ

  • @azizhachimi8744
    @azizhachimi87444 жыл бұрын

    This is surgery, not mechanics....Great job!

  • @burakbuyuk5857
    @burakbuyuk58573 жыл бұрын

    Turkish subtitle PLEASE !! :(

  • @enginehead9966
    @enginehead99665 жыл бұрын

    First

  • @ShopLifeTV

    @ShopLifeTV

    5 жыл бұрын

    Thank you! 🙏🏽