BMW Airhead Pushrod Tube Removal and Installation
Автокөліктер мен көлік құралдары
If you have old rusty pushrod tubes on your BMW airhead motorcycle, you might want to change them out for new stainless steel pushrod tubes. Not only will look much better, but they will probably keep your bike happy for another 50+ years!
In this video, I share how to remove your old pushrod tubes from your cylinder jugs. You can find these on most pushrod tubes on all BMW /5 models, BMW /6 models and BMW /7 models. Between 1969 and 1980 there changed the diameter of the pushrod tubes from 15.88mm (16mm) to 18mm (17.88mm).
This is a pretty straightforward repair that literally anyone can do with some patience! The only specialty tool you might want to pick up will be a pushrod tube mandrel (removal tool). This can be found here:
-16mm Mandrel: www.euromotoelectrics.com/pro...
-18mm Mandrel: www.euromotoelectrics.com/pro...
During the installation process, you might to pick up a good gasket maker or Loctite or your choice:
-Permatex 51850 amzn.to/3MFLgnp
-Loctite 290 amzn.to/3ovPE0d
Read more about the pushrod tube installation:
www.gunsmoke.com/motorcycling/...
If this video was helpful in any way, I'd appreciate it if you hit that like button and if you want to be one of the first to see the assembly video, be sure to subscribe!
________________________________________________________________________
Watch My Previous Rebuilds:
𝐁𝐌𝐖 𝐑𝟔𝟎/𝟓 𝐌𝐨𝐭𝐨𝐫𝐜𝐲𝐜𝐥𝐞 𝐏𝐫𝐨𝐣𝐞𝐜𝐭: bit.ly/3uJVXOn
𝐉𝐨𝐡𝐧 𝐃𝐞𝐞𝐫𝐞 4𝟎𝟎: bit.ly/3unVNfg
𝐉𝐨𝐡𝐧 𝐃𝐞𝐞𝐫𝐞 𝟑𝟎𝟎:bit.ly/3BbuWDz
𝐉𝐨𝐡𝐧 𝐃𝐞𝐞𝐫𝐞 𝟑𝟏𝟕:bit.ly/3wHy2x5
𝗕𝗼𝗹𝗲𝗻𝘀 𝗛𝗧𝟮𝟬 𝗣𝗿𝗼𝗷𝗲𝗰𝘁: bit.ly/2NOLvlp
𝗔𝗹𝗹𝗶𝘀 𝗖𝗵𝗮𝗹𝗺𝗲𝗿𝘀 𝐂/𝐁 𝗧𝗿𝗮𝗰𝘁𝗼𝗿: bit.ly/3bvXLzd
𝗧𝗵𝗼𝗺𝗮𝘀 𝗛𝗟𝟭𝟳𝟯 𝗦𝗸𝗶𝗱 𝗦𝘁𝗲𝗲𝗿: bit.ly/3pDTBKM
𝗝𝗼𝗵𝗻 𝗗𝗲𝗲𝗿𝗲 𝟔𝟖/𝟕𝟎 𝗣𝗿𝗼𝗷𝗲𝗰𝘁: bit.ly/3bKGra3
𝐁𝐨𝐛𝐜𝐚𝐭 𝟕𝟓𝟑 𝐏𝐫𝐨𝐣𝐞𝐜𝐭: bit.ly/37EDeaD
Instagram: / workshoprebuild
Tiktok: www.tiktok.com/@workshoprebui...
E-Mail: Workshoprebuild@gmail.com
🎵Music: share.epidemicsound.com/v6woxm
#bmw #bmwmotorrad #aircooled
Timestamps:
00:00 BMW Pushrod Tube Removal & Installation
00:12 Pushrod Tube Removal Tools
00:33 Measure Clearance Before Removal
01:10 Pushrod Tube Removal Process
02:14 Pushrod Tube Installation Process
03:50 Finished Parts Overview
Пікірлер: 13
Excellent presentation and job WR! Looking forward to the install
@WorkshopRebuild
Жыл бұрын
I appreciate your feedback Gary! The engine rebuild will follow very shortly 😃👍🏽 Cheers
Starting to look really good fellow Canuck, LOL! Lucky your not in Vancouver I'd hire you as a mechanic.
@WorkshopRebuild
Жыл бұрын
I appreciate it😁👍🏽! It would be great to assist you with you mechanical needs. Maybe I‘ll be in you area one day and I can help you out😃 Thanks for tuning in, Regards Andreas
@441rider
Жыл бұрын
@@WorkshopRebuild Well you got a coffee and guide in Vancouver once you get that R60 going your vids are well done and are helping hundreds that may not say it. :)
Looking forward to seeing the fully restored bike in the wild😀
@WorkshopRebuild
Жыл бұрын
Once the engine is done I have a feeling the bike will come together much faster. I still have to repair the final drive which isn‘t the healthiest assembly either...but that‘ll be dealt with once I receive more parts😅 Thanks for watching Simon👍🏽👍🏽👍🏽
@simonchilli2088
Жыл бұрын
@@WorkshopRebuild You're welcome Andreus.
Thanks again for the excellent advice. Always interesting, high quality videos.
@WorkshopRebuild
Жыл бұрын
I‘m glad you could take something away from this video and thank you for watching. Your support has been amazing throughout this whole video series so far!😃
The cerakoted parts look so good. I hope you have some good before and after photos of the engine when it’s completed
@WorkshopRebuild
Жыл бұрын
Hi Broderick! I really dig the cerakote finish as well and thank you for your comment😃 I took more than enough photos of all engine parts...there is already a separate album on my phone😄 You will be able to see the finish once the engine is back together and I will not forget to include before & after shots in that video! Thanks for tuning in! Regards Andreas
ありがとうございます！