BIG Tires? DO THIS before Hydro-Assist on Your Jeep JL or JT

Пікірлер: 21

  • @biggru4114
    @biggru4114 Жыл бұрын

    Use APEX and STEER SMARTS YETI XD SECTOR SHAFT BRACE W/ FRAME SIDE TRACK BAR REINFORCEMENT BRACKET on a Rubicon 392 running 38”. With a Fox adjustable Stabilizer. Drives great. Ran it through the Rubicon trail with no issues. Will probably add Redneck Ram just to take pressure off steering system.

  • @MountZionOffroad

    @MountZionOffroad

    Жыл бұрын

    Awesome!

  • @biggru4114

    @biggru4114

    Жыл бұрын

    Dec '22 update. Recently added Redneck Ram, which eliminates the Fox Stabilizer. Steering is really smooth and goes lock to lock with a finger in park. Since the electric pump really only puts out added pressure when you are turning I am glad that is runs at lower pressures on a normal basis. With the Redneck Ram you may not need the Sector Shaft Brace, as it is doing a lot of the work. However, I plan on owning the jeep for a long time and would rather have it be on the overkill side when it comes to the steering strength and redundancy. Have no doubt if I put on 40" the steering would be the same on or off road.

  • @Escape.Idiocracy

    @Escape.Idiocracy

    Жыл бұрын

    @@biggru4114 great message/point- literally was posting about the same thing :) Did you port the factory box yourself or send it in? I did the PSC big bore on our JK- amazing….. was going to go the same rout with the JT but considering looking into if this box can be ported.

  • @timmcnulty985

    @timmcnulty985

    4 ай бұрын

    What should the cost be to install this system?

  • @Escape.Idiocracy
    @Escape.Idiocracy Жыл бұрын

    While the increased pump pressure “feels” nice. A hydro assist takes a lot of beat down off the steering box itself. Which is a big deal when you start moving 37”+ on bead locks, in the rocks….. so this whole clip is great for those that off road once a month, don’t go too hard, etc. but for those that often off road, and take the harder lines, etc. the psc big bore with hydro assist is the way to go.

  • @MountZionOffroad

    @MountZionOffroad

    Жыл бұрын

    We just posted a blog article detailing many more power steering upgrade options for the JL/JT mountzionoffroad.com/power-steering-upgrades-for-jl-wrangler-and-jt-gladiator/

  • @Escape.Idiocracy

    @Escape.Idiocracy

    Жыл бұрын

    @@MountZionOffroad I appreciate the discussion on the strengthened box by swapping to PSC setup- but in my opinion what’s even more valuable is the hydraulic ram being the component that takes the abuse. Without the hydraulic ram the steering box is absorbing all of the force via drag link- with the ram in place that force is sent through the ram…. Frame deflection, and crappy boxes have been an issue in JK’s and JL/JT’s… Ram is the way to go :)- not saying your post didn’t promote the same message, just adding to it. :)

  • @wolfbyte1555
    @wolfbyte1555 Жыл бұрын

    Redneck Ram. Better for your pump and way more assisted power without breaking the bank. Plus, less effort on installation (my opinion based upon how much that JLU was torn down.) Also, doubles as a stabilizer replacement. Which this kit does not do.

  • @MountZionOffroad

    @MountZionOffroad

    Жыл бұрын

    Sounds like a great option!

  • @warmeds2009
    @warmeds20096 ай бұрын

    Perfect just what I was looking for… will this work with the Jeep wrangler rubicon ecodiesel?

  • @MountZionOffroad

    @MountZionOffroad

    6 ай бұрын

    Yes, feel free to give us a call to discuss and offer any input for your build. Thanks!

  • @omarramirez2335
    @omarramirez23352 жыл бұрын

    What lift is on that thing those Kings look killer

  • @MountZionOffroad

    @MountZionOffroad

    2 жыл бұрын

    It's a bolt on kit from Rebel Offroad

  • @prodigalfound9557
    @prodigalfound9557 Жыл бұрын

    This kit work great with the RedNeck Ram assist kit. Tried true and tested.

  • @MountZionOffroad

    @MountZionOffroad

    Жыл бұрын

    Awesome

  • @plu5five
    @plu5five10 ай бұрын

    So the factory pump is designed for 1300psi until relief for safety reasons but Apex thought it was wise to run a psi number the pump really wasnt designed for? Seems like a bandaid and a ticking time bomb🤷‍♂️🤔

  • @MountZionOffroad

    @MountZionOffroad

    10 ай бұрын

    APEX engineers things very well. The factory system does not use a power steering fluid cooler. APEX includes a very high quality cooler, which is the primary concern at higher pressures. However, your concern is valid and needs to be taken into account along with your intended uses of the vehicle. For example, if your primary use is to traverse extremely hot terrain such as Arizona, Nevada, Southern California where there are vast amounts of land and very few areas for service then that needs to be taken into account across your entire build.

  • @plu5five

    @plu5five

    10 ай бұрын

    @MountZionOffroad Thx for the reply. I would like to mention, 1) the factory steering pump was never designed to be cooled too manipulate the max pressure valve and run efficiently. 2) the cooler is not going to add more output force to the oem steering pump 3) the factory steering pump was designed for the oem Rubicons optional 35" tire option package. This is jus my opinion, we all have our own so its just a friendly debate. I think that spending money trying to manipulate the factory steering pump and box are not worth it when going up in tire size 37s or larger. The factory steering system already has a number of complaints for its lack of strength and non-consistent feel with Jeep already doing a recall on the factory aluminum box and giving them a new steel one. Just sayin

  • @reclineandride2064
    @reclineandride2064 Жыл бұрын

    Too bad no jk application

  • @MountZionOffroad

    @MountZionOffroad

    Жыл бұрын

    That’s because JK never had this electric power steering system

Келесі