I’m so happy I live right next to skunk2 warehouse 😂

@JarrodWillemse

18 күн бұрын

Does that mean you get a discount haha

Great content, from 🇯🇲 enjoying yours videos.

@JarrodWillemse

2 жыл бұрын

Thank you man that means a lot!

Very good detail video 👏🏾🔥

@JarrodWillemse

Жыл бұрын

Thanks for watching bro.

Thinking about this exact upgrade for my 93 JDM prelude vtec

@JarrodWillemse

22 күн бұрын

Do it but make sure you get a tune after!

Great video bro 🫵🏾👍🏾

@JarrodWillemse

Жыл бұрын

Cheers mate!

Nice one🔥👍🤝💯

@JarrodWillemse

Жыл бұрын

Cheers thanks for watching!

California here and we need a lot of things for emissions even tho it’s never snowing where I live it gets cold enough to warrant having those hoses 🔥

@JarrodWillemse

Жыл бұрын

Maybe but if your car is tuned then they take that into consideration and tune that out so not needed. Maybe on a stock car but can just increase idle speed a bit to compensate.

@jamessullivan4979

Жыл бұрын

@@JarrodWillemse possibly just seems like a solution to a problem the factory already solved. 🤷🏾‍♂️ I always battle with the dream of making this a full race build, but then knowing I have to daily drive this build and also being in one of the most restrictive states in the union with cops and emissions. Legally I have to have my cam gears covered and the plastic timing belt cover on and everything visible so I don’t fail visual. Before they even run the sniffer in the back.

@JarrodWillemse

Жыл бұрын

@@jamessullivan4979 I removed it not because it doesn't work but because maybe one day that hose difficult to reach at the back of the engine might break and leave me stranded. Since i don't daily drive the car a rough cold start doesn't bother me. I doubt the rough cold start will make that much more of a difference to the environment taking into considerations all the other modification that are done. Plus i only drive the car once a month. Everyone makes their own decisions based on their own circumstances but for me it doesn't present more positives than negatives.

That's motor is badass

@JarrodWillemse

2 жыл бұрын

Cheers!

Do you have to have a fuel rail or bigger injecters if u put intake manifold and throttle body?

@JarrodWillemse

Жыл бұрын

I have a aem fuel rain and Bosch injectors but you don’t need. Stock fuel rail and injectors is fine for a retune.

What injectors are u using? Would like to upgrade my fuel system. I just don’t know what cc injectors I should be running

@JarrodWillemse

Жыл бұрын

I have 550cc Bosch ev. Depends on power goal and what fuel?

Selling the old Tb?

Is the intake manifold specific for gsr or is it a b16/type r specific

@JarrodWillemse

Жыл бұрын

1.6 vtec engines and. B18 type r engine

sorry, I have an original b16a2 with some mods such as exhaust and air filter... I was thinking of putting a skunk2 intake manifold and 74mm butterfly but, can I easily mount all this and walk or do I have to map? what did you do?

@JarrodWillemse

7 ай бұрын

Hi mate you won’t see a massive gain with those mods on a stock engine. They will be best suited for cams or high comp. You could try a type r manifold. You definitely need a tune after installing the amount of air will be different.

@davidecatalano9956

7 ай бұрын

If I only put the skunk2 ultra street intake manifold and 70mm or 74mm throttle, do I have to remap? if so, what ecu is needed?

@JarrodWillemse

7 ай бұрын

@@davidecatalano9956 yes you need a remap. Would reccomend getting an OBD1 ecu and Hondata.

In first 4/5 years of production no branding was used by Skunk. Maybe you swapped a Skunk for a Skunk;)

@JarrodWillemse

Жыл бұрын

I had a China one before this one definitely was legit. You can choose to put the skunk badge on.

Would you recommend the Skunk 2 manifold on a stock b18c1 with an aftermarket header and exhaust on a stock ECU?

@JarrodWillemse

6 ай бұрын

Hi mate there isn't any point if you aren't going to get a tune. It's better suited to people with aftermarket cams and a larger throttle body.

Lmao you already had a b18 type r intake manifold, could have ported it 😅

@JarrodWillemse

Жыл бұрын

Yeh but the skunk one has a larger plenum volume

@daisbestDA9

8 ай бұрын

It would have costed more to port the manifold than the s2 one cost, that's why you don't see people using stock ported manifolds..

@96jpaulo

8 ай бұрын

@@daisbestDA9 i'm not from the uk, if thats how it is then good on him. In my country you can port it cheaper than s2. But the s2 is definetly the better choice(the inside is the equivalent size to a ported itr manifold if its the s2 v3 i think) for those with stock b16 intake (i'm also tempted by the blox v3 for my b18c4/b16 head project) although a lot of people love to port the stock manifold, those long runners really help the midrange.

Jarrod where you get the hardware from ?

@JarrodWillemse

Жыл бұрын

I purchased everything from JDM yard.

@raulvenegas5783

Жыл бұрын

@@JarrodWillemse do they discolorate ? Is there a link that I could order from ? Cause I would like to get some nuts and bolts... 🤔

@JarrodWillemse

Жыл бұрын

@@raulvenegas5783 Sorry which nuts and bolts are you talking about?

@raulvenegas5783

Жыл бұрын

The ones you used on the video putting the intake manifold together and the nuts on the exhaust manifold

@JarrodWillemse

Жыл бұрын

@@raulvenegas5783 They are just nuts and bolts you can buy in packs from supercheap auto, autobarn any parts shop on the rack that you spin around.

That intake manifold is not the b16, that´s the b18 one.

@JarrodWillemse

2 жыл бұрын

The original one?

@picole321

2 жыл бұрын

@@JarrodWillemse yes. Or its the b16b One.

That’s a b18c type r intake manifold not a b16a.

@JarrodWillemse

Жыл бұрын

Yeh I realised later it came on the car so I thought it was the factory one but the old owner must of swapped it.