Clean Clean setup.Kore3 always come thru with quality parts.

Great information and upgrade

Using just the stock blazer front brakes on mine with the stock knuckle. Almost 11 inch rotors and 2 piston calipers.

Nice job on the brakes bro. I just recently started working on my monte ss. About to do a frame off, and also ordered the UMI kit you have. Can't wait till I'm this far into the project.

@snedenwerks

3 жыл бұрын

Thank! That’s awesome. You will not be disappointed!

@tonyvillegas8400

3 жыл бұрын

@@snedenwerks quick question why did you go with the drop spindles? Wouldn't you get more adjustability with the non drop 2wd blazer spindles?

@snedenwerks

3 жыл бұрын

@@tonyvillegas8400 to be honest, I didn’t look into it when I bought them. I had drop spindles before so I went with them again

@byronroper4527

3 жыл бұрын

@@snedenwerks what caliper bracket did u buy from kore3

For the rotors and calipers what is the right year for the Z06

Nice job , the guys was wanting to know what bolt gos where????

I would be really courous to see data. I am thinking with the weight you added the spinning inertia increased to the point that you negated the upgrade. But Damn It looks good.

Ya know what i hate? When u finish ur brakes n realize.... i REALLY NEED THESE

👍🏾

Love the work 🤟 I have a 78 and I have standard control arms will this exact setup work ?

@snedenwerks

2 жыл бұрын

I would think so but don’t take my word for it.

what kind of wheels are they on the Malibu

What wheels?

Is that kor3 bracket the same one for the c5 brakes

@snedenwerks

3 жыл бұрын

I want to say yes but call them or check online to confirm

Tire rub?

What color is that

Do you have part numbers or links?

great looking malibu, is it on the road yet.

@snedenwerks

Жыл бұрын

Nope, not yet. Hopefully this summer

I just subbed to your channel I made you hit 1K LOL you are welcome! and Great Channel you got here man!

@snedenwerks

2 жыл бұрын

Haha thanks man! Appreciate it!

@Canadiancarguy1987

2 жыл бұрын

@@snedenwerks np and Nice Malibu!

Great video! Can you put a link for all the parts. Thanks

@snedenwerks

Жыл бұрын

Sorry. No. This was a while ago. Don’t remember

Wheel adapters tend to break off the rear wheels on hard accelerates.I have seen it many times when the tires hook up with the ground and the car is 1000 hp plus. Be careful using them.

@bradleymorris8875

Жыл бұрын

I see it with zero horsepower all the time too.

How much did you spend on this setup? I have a GN I want to do the same.

@snedenwerks

Жыл бұрын

Sorry, don’t remember

It looks like you can loose those adapters now. Why do you need them? Too wide?

@snedenwerks

3 жыл бұрын

Bolt pattern

What size bolts did you use for the hub. I can’t find the correct size.

@snedenwerks

2 жыл бұрын

I honestly don’t remember at this point

@fuquaautodetailing3196

2 жыл бұрын

@@snedenwerks all good I figured that.

The bracket was it the hybrid one or regular do you have part number

@byronroper4527

3 жыл бұрын

Have you found the correct bracket

@jdiaz1374

2 жыл бұрын

We definitely need part numbers!!

Where did you get the spindles from

@snedenwerks

2 жыл бұрын

Got mine on eBay

What was the cost out the door for everything?

@snedenwerks

2 жыл бұрын

Don’t know, I pieced it all together

Is there anyway you can get me and itemized list of all part used if so thank you in advance

@snedenwerks

11 ай бұрын

Nope, don’t have time for that. Google.

will this set up fit a 18x8 rim ?

@snedenwerks

2 жыл бұрын

Should but all depends on the wheels. I am running 18x10.5

What do you want for the others I like to buy them

@snedenwerks

3 жыл бұрын

Already gone

What tire size and rim size are you running?

@snedenwerks

Жыл бұрын

Don’t remember. Old video

Great Lakes accent… Cleveland, Detroit, toledo, Buffalo

Bro I have a 1986 Monte Carlo ss Can u give me the exact parts list of everything in this video???

@snedenwerks

2 жыл бұрын

Sorry, don’t remember all the exact part numbers.

Can u give me the part # for those ARP studs....

@snedenwerks

3 жыл бұрын

ARP 100-7708

@Mr.Outside4real

3 жыл бұрын

@@snedenwerks thanks bro & do u have the part # for the rotors also??

@snedenwerks

3 жыл бұрын

@@Mr.Outside4real ACDelco 22812086

great video any chance you want to sell me your old brakes

@snedenwerks

2 жыл бұрын

Long gone, but thanks!

I would like to get the website for the calipers place.

@snedenwerks

3 жыл бұрын

www.kore3.com/

@andrebrowne319

3 жыл бұрын

What year is the corvette are you getting this set up from?

@snedenwerks

3 жыл бұрын

@@andrebrowne319 C6 gen

Update on Malibu?

@snedenwerks

Жыл бұрын

Someday

What's the rotors part number?

@snedenwerks

Жыл бұрын

Don’t remember

Wheel set up?

@snedenwerks

2 жыл бұрын

Kansei 18 x 10.5 don’t remember the offset. Adapters needed for bolt pattern. Will not fit stock frame Gbodys

@darrinj7937

2 жыл бұрын

@@snedenwerks I've notched rear of my frame for 15x10s is any cutting necessary for the front? Also do you have a part number for rotors/are they C6 Z06 as well?

And what was rough total cost

@snedenwerks

2 жыл бұрын

I honestly can’t guess. I pieced it together and prices probably changed since. Call up Kore3 and he can definitely help you out

@greyclassic6563

2 жыл бұрын

He spent a fortune... you can get s10 stuff from a junkyard for about $200.. pads and rotors 100

@snedenwerks

2 жыл бұрын

… and then you have junk yard s10 brake. Not Zo6 brakes.

You from detroit

@snedenwerks

3 жыл бұрын

Grand Rapids area