It looks like you are doing this for the first time!

@GausDIY

6 ай бұрын

I started this job a few months ago, but I'm still not used to working in front of the camera. Please gimme your feedback, it helps me develop yourself. Thank you!

My repairs start out the same; I put the duct tape over the hole, but that's where I stop. Seriously, though, the cyanoacrylate (super glue) plus baking soda comes out hard as a rock so you absolutely need a sanding block like shown in the video, if you try to sand it with just a piece of sandpaper in your hand, you will sand away all the original soft bumper plastic around the hole and leave the new patch sticking out. Believe me, I found out.

@GausDIY

6 ай бұрын

Attach sandpaper to a flat wooden surface, this can help the surface more flat and evenly. Use 100 sandpaper for rough , and 400-800 sandpaper for finishing surface. This method will help you fix that. Or if you have a sander, use it to save time. Thank You So Much!

That is a great idea exactly what I was looking for! Thank you

@GausDIY

7 ай бұрын

Thank you, I'm glad the video was useful to you

Excelente!!! Me suscribo, abrazo desde Argentina!! 🙌🙌👌👌👌

@GausDIY

6 ай бұрын

Muchas gracias

Good video I liked you don't cut it too much, it made it believable

you are doing v good job, in short time your channel growing fast. keep uploading the content

@GausDIY

7 ай бұрын

Thank you! Good luck to you! 🤞🤞🤞🤞

@diyinventor_

7 ай бұрын

Thanks mate @@GausDIY

Faltou umas lixas mais finas pra dar um melhor acabamento, mas muito bom resultado

@GausDIY

6 ай бұрын

Muito obrigado ❤️❤️❤️❤️

If you solder before putting the aluminum tape on the opposite side, you'll have a much easier time peeling off the tape.

@GausDIY

6 ай бұрын

Thank you for your comment, I will take note of that

Nice idea ❤🎉🎉

@GausDIY

6 ай бұрын

Thank you, ✌️✌️✌️✌️🇺🇸🇺🇸🇺🇸

I love the soundtrack - who is it? Does it have a name?

@GausDIY

7 ай бұрын

It's name is: A trip around the Moon, Alaska Sky, Jah Jah Bangs. Thank You!

Thank you for all these great tips. Keep these ideas coming. Great video.

@GausDIY

6 ай бұрын

Thank you!

Thanks for the video but a nice time-lapse so we don't have to watch the same melting portion over and over again would be nice.

@GausDIY

6 ай бұрын

Thank you for you comment!

Can we use white cement instead of baking soda?

@GausDIY

7 ай бұрын

I tested and found that: baking soda is better and cleaner than white cement. Thank you.

@1crazypj

7 ай бұрын

Baking soda is available at almost any food store or supermarket and is cheap, why even ask? The cyanoacrylate (Super Glue) is way more expensive

@GausDIY

7 ай бұрын

Maybe he has cement at home, or he can't find baking soda near him@@1crazypj

How many Watts (W) is your soldering iron? I have one of 30W and there is no way to fit 6mm (1/4") tube in it as the hole is only 0.175" diameter. One eighth inch is 0.125" and three sixteenths 0.187" You could also look at part and find out what type of plastic you have (all newer parts will have it somewhere for recycling purposes), then use the same stuff to fill or reinforce the repair

@GausDIY

7 ай бұрын

I use 3 types including: 40W (diameter: 4mm), 60W (diameter: 6mm) and 100W (diameter: 8.2mm). I work for a Garage, so I have all kinds of plastic available. Thank you so much! 🤞🤞🤞🤞

@1crazypj

6 ай бұрын

@@GausDIY I'll have to get a cheap 60w, will make life a lot easier

Can you patch a air hose mine has a little slit in tried raping it with small wire and put silicone on it it worked for a little while but it developed a little hole it started making a popping sound I looked at it was like tiny balloons

@GausDIY

6 ай бұрын

If you fail to do it, use specialized hole patching materials for it. You can learn more about it on the internet before doing it, it will be more effective

What is name white powder

@GausDIY

6 ай бұрын

It's baking soda

자막이라도 좀 넣어주시면 좋겠네요.

@GausDIY

6 ай бұрын

설정에서 자막을 켜실 수 있습니다

How come you didn't do the same to the backside?

@GausDIY

6 ай бұрын

because I think it's not necessary

Which liquid you drop on white soda powder. Why hiding its name?

@GausDIY

6 ай бұрын

I wrote in the subtitle, it is super glue, I don't want to reveal its brand, because the audience may misunderstand that I am advertising that brand. Thank you so much!

Fatto grazie

@GausDIY

6 ай бұрын

thank you

use sand paper 2500

@GausDIY

6 ай бұрын

Thank you for your suggestion, I will try with it

La polvere che avete messo cos'è

@GausDIY

6 ай бұрын

baking soda powder

تخسر عليها مليون

@GausDIY

7 ай бұрын

Well, It is a way for you to repair broken plastic parts, helping you save money and reduce waste into the environment. Thank you!

De autos

@GausDIY

6 ай бұрын

Hope video is useful to you, thank you

@hectoraular6180

6 ай бұрын

Dónde conseguir ese super pegamento. La resina y endurecedor lo desconozco.

@GausDIY

6 ай бұрын

lo compro en el supermercado

What can i use if I'm out of cocaine, though?

@GausDIY

6 ай бұрын

You can use: baking soda, cement, Charcoal, etc

Il liquido cos'è Atak?

@GausDIY

6 ай бұрын

è una colla super

Everyone listening at the shop thinks im watching porn

Si hai fatto un vero e proprio schifo 😂😂😂

@GausDIY

6 ай бұрын

Thank you, I think you will be more skillful in repairing plastic than me, so Gaus DIY channel's videos are of new ideas and implementtation steps. so remember to use it to repair plastic items in your home. 💕💕💕✌😁😁😁😁

Todo bien pero no sabes hacer un corcho para pulir 😂😂

@GausDIY

6 ай бұрын

¿Puedes mostrarme un ejemplo?

Ипать, у тебя талант!

@GausDIY

6 ай бұрын

Спасибо за комплимент

ㅋㄱ 쓰바 새로 가는게 빠르겠다 공돌이나 가능 장비에 재료에 에휴

@GausDIY

6 ай бұрын

감사합니다. 영상이 도움이 되었기를 바랍니다.