Best Downstream nozzles!! (Xjet vs JROD)
If you're looking for the best way to soft wash with a pressure washer, you are probably looking at the x jet M5 twist and the Jrod setup. In this video I will share my experience and takeaways from both types of down streaming.
Here's the links to check out everything discussed in the video:
XJET M5 Twist
amzn.to/3UgJOeT (paid link)
JROD
amzn.to/4deukka (paid link)
Downstream Injector
amzn.to/3JBDaeg (paid link)
M5DS
amzn.to/4aTTX8s (paid link)
3 Nozzle J rod holder
amzn.to/44fJuBO (paid link)
Startup Marketing kit (only $350) for Uniforms, Business cards, Truck magnets and 1k flyers!!
lddy.no/1dbav (paid link)
#pressurewashing #downstream #powerwashing #softwashing #housewashing #hustle #smallbusiness #pressurewashingbusiness
Пікірлер: 31
I just watched a pressure washer video without trying to sell me a course or some other crap. Well done thanks
@steppspressurewashing
2 ай бұрын
Lol, I'm glad you enjoyed it! I definitely got frustrated with some unhelpful vids when I was trying to start my business.
He knows his stuff don't he
Both are great options, and affordable for anyone starting out
I used a xjet today on a hose and driveway. I use 50 ft of hose for my xjet, and it works perfectly fine. It can be a pain at times, but it does work good
@steppspressurewashing
Ай бұрын
Yep!! It's definitely an effective tool. A pain at times yes, but I love my xjet!!
Great video!!
@steppspressurewashing
3 ай бұрын
Thanks for watching!
Could you do a short video going further into detail on how you run both at once
@steppspressurewashing
2 ай бұрын
Hey man, thanks for watching!! This might be what you're looking for kzread.info/dash/bejne/iIN9t5J_c5SumbQ.html
I see you bro. Good video.
@steppspressurewashing
3 ай бұрын
Thanks man! 👍
Great explanation. So you use the x jet nozzle to soap and then you switch to regular M5 twist to rinse (turn downstream injector “off”)?
@steppspressurewashing
3 ай бұрын
Thanks, it's actually the m5ds that draws soap from the injector. Then the x jet creates enough pressure to close the dsi for the rinse
@wrightwaterworks
3 ай бұрын
So you have the xjet nozzle with the barb hanging off of it for the rinse, the m5ds nozzle for soap(opening the dsi bag up), and what else on your 3 nozzle set up? Photos for clarity?
So you think the xjet is better than downstreaming with the actually pressure washer? I’ve got a Simpson 2.5 g per minute pressure washer with a built in down stream injector. Do you think running the regular downstream injector on the pressure washer would be better? Or run the xjet instead?
@steppspressurewashing
27 күн бұрын
@@Steve0thegreat if you already have the dsi you are pretty much ready to downstream, which is what I do 95% of the time. You will eventually need a stronger mix, and the X jet will be needed for that.
@Steve0thegreat
27 күн бұрын
@@steppspressurewashing do you think it would be best to go ahead and get the xjet? I’m getting the best hoses for this. I am going to buy a surface cleaner, maybe 14 inch.
@Steve0thegreat
27 күн бұрын
@@steppspressurewashing thanks for responding, I’m nervous about starting this man.
@steppspressurewashing
27 күн бұрын
@@Steve0thegreat that's normal, but you'll never know until you try it! Focus on client acquisition, and have a strong financial plan in place when you start. There are busy seasons, and slow seasons so make sure you are budgeting for both.
@Steve0thegreat
27 күн бұрын
@@steppspressurewashing yeah, I’m really trying to figure out what to do in the winter so I’m not stuck without pay.
Does the xjet reduce pressure?
@steppspressurewashing
10 күн бұрын
@@shanenorth8663 While running the x jet drops my pressureto about 500psi. Different nozzles operate at different pressures
When you are checking PSI with a pressure gauge, do you put it at the end of your high pressure hose before the gun?
@steppspressurewashing
3 ай бұрын
I do, but a lot of people will put it at the back of the line and leave it on.
The jet does what a JROD can't.. Use both
@steppspressurewashing
3 ай бұрын
My thoughts exactly!
Super strange My xjet runs at about 1000 psi My Jarod runs at 300 psi Xjet sprays harder then my Jarod, but jrod lays down way more water
@steppspressurewashing
Ай бұрын
Hmm, that is weird. Maybe it's differences in our flow rates compared to our orifice size...
@lifeontheroad_
Ай бұрын
Will the J-rod spray chemical with downstream? From my understanding, the downstream only works with a low pressure tip. How are people getting chemical higher on to a house?
@steppspressurewashing
Ай бұрын
@@lifeontheroad_ the jrod usually has 4 nozzles 2 soap nozzles(one for high reach and one for fan) and 2 rinse nozzles (one for high reach and one for fan)