Loved the editing, but the printing ideas felt like a waste of filament - most items seem quite impractical for real life appliance and only good for single-use entertainment.

Hey..you’re using a dry wall screws to mount the 3D printed things. You’re also using a drywall setting bit (used to prevent the screw from being screwed too deeply into the drywall.

i am in awe of your spring collection

I know how much work and effort has been put into this. Good job!🥰👌

I'm still in aww over the fact that. Not only can it print an already threaded hole. But it can also print a matching threaded screw to fit!!

I honestly can’t wait to get a 3D printer, I don’t really care to build super big projects or crazy stuff but to learn and create things to help with everyday stuff, I definitely want to just make art for my Gaming room as well as around the house to add some authenticity

@thecookingcat5140

7 ай бұрын

did you get one?

The best part of this video hands-down is that the batteries are all turned the same way. My OCD thanks you for that.

I really like your time lapse shots with the clock

your print are awesome!! did you mod the firmware of the voxelab aquila?

very well. amazing. thankyou for hard work

Wow, really incredible job! On your Aquila, what are you using to keep the glass bed down? I didn't see any clips... Thank you!

@engineericly

Жыл бұрын

I use some black clippers with threads, take a look closer :)

Thanks for this video! Greetings from Argentina!

Absolutely amazing!

Great channel, i have anycubic mega pro, i can't wait to start with my new projects 🥰

Do you have a video of just the SD card holder? Would love to share with my photo-centric viewers. Also I have to figure how to modify that for CFE-A and CFE-B cards which I now have a lot of.

@HuFlungDung2

Жыл бұрын

How useful is that really? Be better if you added a business card size slot alongside to add a label for each card.

@funkdaddyflex

Жыл бұрын

I think it would be cool for Nintendo switch games

@davetriesthis

Жыл бұрын

@@HuFlungDung2 Well I have four CFE-A cards and two CFE-B cards, so having a holder for those would be handy.

Мир тебе и твоему дому! Спасибо за качественную подборку!

Great to see an Uzbek guy to reach this level! Bosing!

Thanks a ton! Fantastic set of prints. I'm printing the Parametric Battery Box now because I have been looking for a fantastic solution to my plethora of batteries. Just downloaded the Gyroscup files because that is just super rad. Update: The Gyroscup is fucking amazing! It was a little tight at first, but a quick zip zip with a 1/4 drill bit and now everything is free floating. It works like a dream.

Absolutely amazing. I hope, one day, to be as good at painting my prints as you are. Amazing work.

@0rgullonacional

10 ай бұрын

None of this prints are painted. Its the filament colour

Damn this is so satisfying to watch

The pen launcher is my childhood dream

pistaccio opener i would buy!

thanks for the idea

Most of these designs were pretty silly lol, can't see why I would use them but definitely good for learning!

Thanks i'll use it for my new videos

hello, what trick do you use to show an accelerated print with the printhead out of scope?

@headphonedog3180

Жыл бұрын

i think they have a tower in the corner of the plate that the printhead goes to every layer and simply take a photo of each layer of the main print when the printhead moves away to do the tower

Thumb saver is really awesome and definitely going to print! But it's too use on someone else, hence saving your thumb from the pressure 😆

@CrashPro1

Жыл бұрын

BTW, you earned a sub! Love these designs and look forward to more.

Go with karambit keychain spinner, viewers will love it

What was the chemical you used at the very start bc i usualy struggle geting my prints off the same bed

I love your Video style. 😃 Really nice! BTW... Which filament are you using? They all have this beatiful shiny surface 😍

@engineericly

Жыл бұрын

Thank you, I use silk and mate PLA

At what layer height did you print these, they look so smooth!

@urgamecshk

Жыл бұрын

0.1-0.16 look good. 0.1 is essentially flat

Im new to printing, what ever app you use to make this stuff is it user friendly? I dont want to get a printer an cant use the software lol

GRACIAS AMIGO

You are the best Man

can you put the dimensions and other stuff to print the wallet

The pen launcher made me chuckle.

Hi! I loved the tool that you used to clean the piece at 0:42. Could you please send a link or name it? Thanks

@jaume748

Жыл бұрын

for those who are still in doubt: is a deburring tool

The device you made so that you could sit on the couch And have a cup there reminds me of that thing so that babies don't spill cereal everywhere

Massage tool usage had me laughing :D

@tonettegraceorbena6078

15 күн бұрын

HAHAHAH me too

Where did you get those plastic bags? Would love to find some of those up here in Canada....

Can u please provide the video procedure of making of thumb saver.

I’ve never seen someone take a blowtorch to remove a print from a build plate before. I have questions 😅

Very good items

What is the stl file for the wallet you made

I'm new to 3d printing. It's so much fun. Sub.

Dude... That "massager" is a weapon 😂

Super camera angles bro

Can you share your settings used for the wallet.

love how you are using playboi carti mixes as bg music

Wow .. really nice . .!! May I know which camera you are using for your studio ?

@engineericly

Жыл бұрын

Hello, as this video includes several footages in 2022, these videos were recorded using Firstly Redmi Note 10 pro, Sony ZV E-10 and Canon R5

@HarikrishnanK92

Жыл бұрын

@@engineericly Wow great !!! Thanks ..

Awesome 👍

@engineericly

Жыл бұрын

Thanks 🤗

Really cool

What filament brand you use?

How do you clean your printing bed from those marks?

"for your fingers" suuuure :D

Amazing idea, you have the stl of the inner ring updated of 26:30 minutes? Thanks

@UriyZ9mb8e

10 ай бұрын

i also would love to see this. if i find it i will paste the link here

Great video

Salomn oka yahshimisiz maslahat berolisizmi qanday modeldagi printer ogan yahshi

He's taking all the red tea !!!!!!

Have you already got the flsun v400? OMG :O

What Is The Printer With The X On It

Teas from my country 😍Turkey ❤❤

The best cool Prints

uzbek inson kilgan ekan bu videoni, baraka topsin, meni fikrimcha agar plastik shtamplar ishlab chikarishni yolga kuysa shu printerda ancha pul topsa buladi, salomat bulinglar!

Guys My Tech teacher in middle school and I were talking abt 3d printers when he said this is something that really matches you he sends me a mail where you could apply for building a 3D printer by now 1st day passed of building I am 190% of what we needed to make this week it’s really fun and I’ve seen it in action works like a charm so if the wallet at 7:04 is PLA I’m making it for sure when i finish building (11th of march 2024 is exam so basically the ending) Could someone tell me if 7:04 is pla

0:42 what is that scraping tool I got to get one of those.

what website do I go onto to download the Gyroscup

What printer is that

what are they spraying on the plate?

Could someone tell me, if these projects work equally well with Resin printers, Thank you.

@AtillaUygur

8 ай бұрын

i would say it is possible, but some of these prints are bigger and from what i know many resin printers doesnt have such a large build plate. but i wouldnt see a reason to why it wouldnt work

Why do you humidity your books? 😅 Great video for the 3d

What kind of material? Is it toxic?

cual es el programa que usas para diseñar?

What is the name of the tool used here? 0:42 for scraping the edge

@zedmongames2096

11 ай бұрын

deburring tool

You are the best

what is that beautiful filament at 11:31?

Mashaalloh 👍 Alloh ajrizni bersin birodarim

Hello, you are a grown-up, which silk filament do you use?

1:22 man just printed 3 back massager thinking it's thumb fidget toy

I'd like to meet the person who has 24 full size SD cards, these days.

@bikelifegmx

18 күн бұрын

I keep the mini ones inside the big ones so i dont lose them 😊

What is the model of your 3D printer?

0:31 what did you used there? 👀 Air spray to cool the bed? Wd-40? 👀👀

@engineericly

9 ай бұрын

It is Super Glue accelerator

Whats the screw size used at 17:29

13:17 cup fixer, hello, I’m kneel 😅

I see you have no idea how to use that massage tool... but at least you have three of them.

Very Nice

Mashallah Brother

Ma se uno vuole creare da sé che software ideale per modelli 3d

Nice ideas, but the best prints are the selfmade ones :)

Bro keep going

6:46 POV: Are you watching this from Argentina.

Can you make wrist watch

5:51 is my favourite and second is 10:12

Ajoyib.Siz qanday material ishlatyabsiz

how do you get your prints to come off so easy ???

@zinput

9 ай бұрын

Glass and pei self release most of the time when the surface cools.

Great printer but I see a lot of white elephant uses and only a few anyone would practically consider. Only a student would want plastic shelves. I just see a lot of future junk that'll end up in the oceans. Need to give more thought to the ideas.

what is that stuff you spray

@engineericly

8 ай бұрын

Super glue accelerator

Printer name?

love you

these teas are turkish where did you find it :D