Before & After HEADERS 0-60 / 0-100 E46 330ci

Автокөліктер мен көлік құралдары

0-100kmh test. 0-60 After having spent winter restoring and modifying my E46 330ci, I test the modfications that i have made on both 17" vs 18" wheels
Schmiedman Longtube headers with race catalysts. Racingdiff 188k lsd conversion kit
Full suspension refresh in the back and an alignment

Пікірлер: 59

  • @damianwillemsen9224
    @damianwillemsen922411 ай бұрын

    Thanks for the video! It confirms what I was thinking. I have my manual 330ci with schmiedmann headers, race cats and eisenmann X pipe, couldn’t be happier with the sound! I had the feeling the car has more power than 231hp. By racing a stock mini cooper jcw automatic with 231hp and 320nm that is also 300 kg lighter I was surprised. The e46 is exactly as fast, and above 150 it starts gaining. I’m intrigued to get in on a dyno to know the exact power and torque now!

  • @OEMplusRESTO

    @OEMplusRESTO

    11 ай бұрын

    The crazy thingn is its now as fast as the e36 m3 💪

  • @iain4853
    @iain4853 Жыл бұрын

    That was a great car to start with. You’ve made it even better. Can’t wait to drive my ci soon. Keep the vids coming from the E46. Big up from England. 👍🏼

  • @OEMplusRESTO

    @OEMplusRESTO

    Жыл бұрын

    Thank you fellow ci owner. These vars a effing great. The car is.. feels.. very different from stock with these two mods so if you want to try something new with it this combo could be it.. headers and lsd Big up from across the pond👌

  • @AmanSingh-si4hc

    @AmanSingh-si4hc

    9 ай бұрын

    @@OEMplusRESTOyou think the lsd is worth it even in my 320ci vert with the m54b22 170bhp engine?

  • @OEMplusRESTO

    @OEMplusRESTO

    9 ай бұрын

    No. It hardly makes a difference on my 330ci with more power. It pulls out of a corner better, and launches better. But i think maybe the 170hp version is better off with just great tires

  • @AmanSingh-si4hc

    @AmanSingh-si4hc

    9 ай бұрын

    @@OEMplusRESTOI’m looking into 17inch apex wheels after your videos testing the different size wheels as a replacement for my 18in MV2s one day

  • @OEMplusRESTO

    @OEMplusRESTO

    9 ай бұрын

    The mv2’s are probably one of the heaviest 18” wheels from bmw. Im certain youll be able to feel a difference. Especially on a 2.2 e46. Im happy my video has helped you

  • @kennmart1
    @kennmart1 Жыл бұрын

    Big thank you!, I have a 2003 330ci you filled in a lot of info for me.

  • @OEMplusRESTO

    @OEMplusRESTO

    Жыл бұрын

    Thats all i could hope for. Youre welcome

  • @zaslonikov
    @zaslonikov Жыл бұрын

    you make very helpful videos, thanks for your work and greetings from kyrgyzstan

  • @OEMplusRESTO

    @OEMplusRESTO

    Жыл бұрын

    Thank you for the kind words. Greetings from Denmark fellow gearhead

  • @kwaki82
    @kwaki8211 күн бұрын

    Super info. Also i had 17/18 dillema, after 1 min of spirited driving on 18 it was 17 back on. Night and day.

  • @kennytmt
    @kennytmt Жыл бұрын

    Thx for the info, good review!

  • @OEMplusRESTO

    @OEMplusRESTO

    Жыл бұрын

    Thank you for the support

  • @oscararnesen699
    @oscararnesen699 Жыл бұрын

    Perfekt lyd Tim! Dejlig med et godt review!😁🛠️

  • @OEMplusRESTO

    @OEMplusRESTO

    Жыл бұрын

    Tak. Fandt også ud af jeg havde sammenlignet før/efter med ikke “valid” data fra dragy så måtte starte forfra med testen. Det virker!

  • @BatRadichev
    @BatRadichev4 ай бұрын

    The back/cat O2 sensors can be flashed by a remap or with the original Euro 2 software. However a remap will open another 10-15 wheel HP

  • @adrienpearson9901
    @adrienpearson99012 күн бұрын

    Wish you showed us a video of the car revving with the headers/scorpion exhaust outside of the car!

  • @OEMplusRESTO

    @OEMplusRESTO

    2 күн бұрын

    E46 330ci Headers and cats install with attempted 0-60 kzread.info/dash/bejne/fXl_rc2aZ9qsaag.html

  • @OEMplusRESTO

    @OEMplusRESTO

    2 күн бұрын

    I have a little sound clip going on in this video :)

  • @oktanskioktan9372
    @oktanskioktan93726 ай бұрын

    I daily drive my 330Ci'04 and I got it on 17s. Just get right wheel a you got much comfortable and reliable (suspension) car

  • @OEMplusRESTO

    @OEMplusRESTO

    6 ай бұрын

    I prefer the 17” as well:)

  • @OEMplusRESTO

    @OEMplusRESTO

    6 ай бұрын

    What kind of mileage do you get? How about oil consumption? Mine is thirsty for oil lol

  • @oktanskioktan9372

    @oktanskioktan9372

    6 ай бұрын

    @@OEMplusRESTO I got the car for about 7 years now and I'm close to 220k miles on it. Recently change the original exhaust (rust holes) for new stock one. And made anti-rust undercarriage protection with acid rust removal and using protection for boats. :) Oil consumption is as it was in 2016 - about 400ml/1000km. I drive on Valvoline 5w40 Maxlife and change it every 6500 miles. Got plenty of factory parts still in it. I drive it mostly on highway with speeds over 100mph (thanks to 6speed).

  • @OEMplusRESTO

    @OEMplusRESTO

    6 ай бұрын

    @oktanskioktan9372 that m54 will keep going!! still on original rod bearing? Im in the middle of changing them. It turns out it wasnt needed, but the oil pan and filter housing were both leaking so i mights as well while im at it. Mine drinks 1L pr 1000km but i do alot of engine braking and run 5w40.. 10w40 seemed to work better in thay regard in my previous 530i. I hope you get many more miles out of it:)

  • @oktanskioktan9372

    @oktanskioktan9372

    6 ай бұрын

    @@OEMplusRESTO I hope get close to 300k. Yes, still original rod bearing. If the engine fail I would consider finding another one and swap or make general repair with M52 piston rings to prevent oil consumption. Good luck with this, I think there is no better RWD entusiast car for the money. Still in 2023.

  • @lordcardigan5130
    @lordcardigan513020 күн бұрын

    Did you need to tune for those headers?

  • @OEMplusRESTO

    @OEMplusRESTO

    20 күн бұрын

    Not required. But it is adviseable imo. Even better gains

  • @jsonli
    @jsonli20 күн бұрын

    How is the smell with catless headers?

  • @OEMplusRESTO

    @OEMplusRESTO

    20 күн бұрын

    Honestly not bad at all. But i did still have 300cel cats

  • @gmartirosyan
    @gmartirosyan Жыл бұрын

    I am surprised you had a fitment problems with Schmiedmann

  • @OEMplusRESTO

    @OEMplusRESTO

    Жыл бұрын

    Hi. Have you installed some and did yours fit better?

  • @gmartirosyan

    @gmartirosyan

    Жыл бұрын

    @@OEMplusRESTO I have stock exhaust manifold on my ZHP. But I expected that reputable brand like Schmiedmann produced better quality stuff.

  • @OEMplusRESTO

    @OEMplusRESTO

    Жыл бұрын

    @@gmartirosyan i love the zhp. Not available here sadly. im in the middle of restoring my stock exhaust too. Will be going back to stock for the next video

  • @gmartirosyan

    @gmartirosyan

    Жыл бұрын

    @@OEMplusRESTO hope you'll find the best setup!! Good luck!

  • @riccardocervetti3203
    @riccardocervetti3203 Жыл бұрын

    Do you have tramlining with 18 inch?

  • @OEMplusRESTO

    @OEMplusRESTO

    Жыл бұрын

    Yes

  • @OEMplusRESTO

    @OEMplusRESTO

    Жыл бұрын

    But i also have it with 17”.. just not as bad as the 18”

  • @riccardocervetti3203

    @riccardocervetti3203

    Жыл бұрын

    @@OEMplusRESTO is it impossible to fix? It is quite annoying for me, maybe because I have worn tyres

  • @OEMplusRESTO

    @OEMplusRESTO

    Жыл бұрын

    The lower and harder the sidewall the worse it is. And some tires do it more than others as well. Unless youre going for higher tire profile there not much you can do. Alignment plays a part too. Just alot of things that add up really. Id try 17” with some really good touring tires

  • @riccardocervetti3203

    @riccardocervetti3203

    Жыл бұрын

    @@OEMplusRESTO I think I am going to try four 225 40 r18 with nexens because I currently dont have the money to change rims🤣

  • @M54ftw
    @M54ftw2 ай бұрын

    Why did you swap the 18“ rims to 17“?

  • @OEMplusRESTO

    @OEMplusRESTO

    2 ай бұрын

    Because i wanted to do the test and found out 17” drives alot better

  • @M54ftw

    @M54ftw

    2 ай бұрын

    @@OEMplusRESTO why did you think the 18s are bad for the subframe?

  • @OEMplusRESTO

    @OEMplusRESTO

    2 ай бұрын

    Sorry. Misunderstood the question. I swapped because i have experienced the 17” are alot faster. So i wanted to check if it was still true. 18” arent bad for the subframe, but the wheelhop they imduced is. I dont know why the 17” doesnt suffer from wheelhop lile the 18’s do

  • @M54ftw

    @M54ftw

    2 ай бұрын

    @@OEMplusRESTO interesting i currently have 18“ BBS Replicas on mine and they start to vibrate at around 110km/h did you have the same experience?

  • @OEMplusRESTO

    @OEMplusRESTO

    2 ай бұрын

    @M54ftw no vibrations in my case. Sounds like your wheels arent balanced properly

  • @CustomrigsDe
    @CustomrigsDe6 ай бұрын

    you defenetly should correct your times with the slope ;) they are not right ! you cant compare two times with -0.36% slope and -0,96%

  • @OEMplusRESTO

    @OEMplusRESTO

    6 ай бұрын

    Youre right. I have gotten better with datalogging now and only use verified runs for the lastest videos

Келесі