BEAUTIFUL Drill Press Restoration (Delta 17”)
Тәжірибелік нұсқаулар және стиль
In todays video we restore a 1940s Delta drill press. It was in rough shape. We fully tear it down, restore it, and bring it into the 21st century. Enjoy
Follow us on Instagram / vanovercustoms
Check out our Etsy Shop to get an art piece in your own home!
www.etsy.com/shop/VanoverCust...
Пікірлер: 239
Awesome video and masterful work. I just wished the music was a bit lower and I could actually make out the sound of the process itself
@VanoverCustoms
3 жыл бұрын
Newer videos have lower music and more sounds. Noted
@ahmedmosaab
3 жыл бұрын
@@VanoverCustoms well, I'll subscribe for those and the future videos 👍👍
@VanoverCustoms
3 жыл бұрын
Thank you
Idk how I’m just recently finding your channel. Love it.
@VanoverCustoms
11 ай бұрын
Thank you I appreciate it
great job!
@VanoverCustoms
4 ай бұрын
Thanks!
Always great work. I love watching .
@VanoverCustoms
3 ай бұрын
Thank you
You should start a business restoring old tools and re-selling them. You do such a good job on these restorations!
@VanoverCustoms
7 ай бұрын
Thank you. No one will pay for what’s involved to do it right when a new one can be had so cheap. No one wants to spend 3k on a drill press lol.
@jonirish323
7 ай бұрын
@@VanoverCustoms I’m afraid that u r right. The Chinese have flooded us us with so much cheap crap, that hardly anyone appreciates quality anymore.
I love your solutions to problems.
@VanoverCustoms
6 ай бұрын
Thank you
Sweet work madman... Once you laid up that Milwaukee lathe......... I was sold. Solid job. Thanks for showing us your work.
@VanoverCustoms
6 ай бұрын
Thanks
If this channel did not exist; it would have been necessary to invent it. I hope to see you restore many more older machines. great work
@VanoverCustoms
3 жыл бұрын
There will be more restorations to come thank you
Baldor grinder & Festool tools this guy earned his respect and legitimacy:) great work!
@VanoverCustoms
6 ай бұрын
Love both brands
I bought 1988 WS-15 press drill made in poland - this is solid machine , weight like 280lbs and is is table drill press (small compact size). It has 1,1kw 3 phase (380V) motor. It is so much powerfull it can burn a crap quality drills , and you can easly drill 20mm I love to use it.
@VanoverCustoms
6 күн бұрын
That sounds awesome
Stunning job restoring that old drill.
@VanoverCustoms
3 жыл бұрын
Thank you!
I've rebuilt 5 of these DP600's. I only strip paint if they're been previously re-painted. (it's an absolutely miserable job). If it's original factory paint it's as tough as nails and it's a great base for a new topcoat once you properly prepare the old surface. I love you column polishing jig and your table repair!!
@VanoverCustoms
7 ай бұрын
Thank you!
Excellent restoration!
@VanoverCustoms
2 жыл бұрын
Thank you
Amazing work as always, this and the lathe restoration are superb bookends.
@VanoverCustoms
2 жыл бұрын
Thank you
Beautiful job!
@VanoverCustoms
3 жыл бұрын
Thank you I appreciate it.
A great restoration!
@VanoverCustoms
2 жыл бұрын
Thank you
😊 Very nice job. It looks fantastic
@VanoverCustoms
11 ай бұрын
Thank you! 😊
Nice work Kyle! VFD is a great idea!
@VanoverCustoms
2 жыл бұрын
Thank you
Awesome work! Awesome video! I have the same drill press that I’m about to restore. Thanks for sharing
@VanoverCustoms
3 жыл бұрын
Absolutely. Good luck
Beautiful job well done.
@VanoverCustoms
6 ай бұрын
Thank you
Very nice work!
@VanoverCustoms
3 жыл бұрын
Thank you
Nice blend of old and new, well worth the effort. Not crazy about the colour but to each their own. I love the look of machines from that era.
@VanoverCustoms
3 жыл бұрын
Thank you for the kind words. The color is polarizing I will agree.
Nice work!
@VanoverCustoms
3 жыл бұрын
Thank you
Very nice. Save the machines !!!!!
@VanoverCustoms
3 жыл бұрын
Agreed
This is so satisfying.
@VanoverCustoms
2 жыл бұрын
Thank you
Great job 👍
@VanoverCustoms
3 жыл бұрын
Thank you
Beautiful drill. Love those DP600 Deltas. Glad you were able to repair the production table. Subbed!
@VanoverCustoms
3 жыл бұрын
Glad you liked it. It was a fun build
@Chris-bg8mk
3 жыл бұрын
I was pretty shocked how well that table seemed to weld. Was it cast iron? What process did you use? What filler. Thanks for the cool content!
@tommiller5014
4 ай бұрын
Agree, nice job on that table. Looks fantastic
Very cool. Thanks for the vid. Just picked up a 1978 Duracraft DP-514 today for $80. Going to start my press project this week!
@VanoverCustoms
6 ай бұрын
Good luck
cool video! Im just starting on restoring a atlas 1060 that came from my grandfather. you gave me some good ideas.
@VanoverCustoms
3 жыл бұрын
No prob
Súper Restauración..!!...Excelente trabajo y Color...ji ji j i...Saludosss my Friendddd....!!!
@VanoverCustoms
3 жыл бұрын
Thank you
Nice job on the table.
@VanoverCustoms
2 жыл бұрын
Thanks!
Wonder full job my friend....From Australia
@VanoverCustoms
6 ай бұрын
Thank you
You do very nice work. I have rebuilt a couple of drill presses, but all I did was to install new bearings and adjust everything as best as I could. I got my machines from my uncle that was a manager for a company that made screws and bolts for Pratt & Whitney. I bought new drill presses that I'm not sure were as good as what I already had. I wish I had painted them and gone over them as you did.
@VanoverCustoms
3 жыл бұрын
Yeah the old machines are better. They just don’t make them like that anymore
Espectacular te quedo felicitaciones me encantó la restauración. .saludos de argentina! !!
@VanoverCustoms
6 ай бұрын
Thank you
How did you learn sooo much at a young age? AWESOME
@VanoverCustoms
2 жыл бұрын
Constantly seeking information. Not sitting around doing nothing. Getting out there to start making mistakes!
good job!! regards from Uruguay!!
@VanoverCustoms
3 жыл бұрын
Thank you!
Nice BIG vise!
@VanoverCustoms
3 жыл бұрын
Thanks
excellent work. I have an old Waldron I will restore one day
@VanoverCustoms
2 жыл бұрын
Those are great thx
Hey! brother man, we are built from the same cloth. If your in there to change bearings, might as well powder coat it. Cover/plug all tolerance areas. I have a 70’s Delta (bowling baller) DP, it’s all yellow with black highlights. Keep up the beautiful work.
@VanoverCustoms
3 жыл бұрын
Yes indeed. Thank you sir. Thanks for feedback
Iove you bos❤ so nice work a neo lif
@VanoverCustoms
5 ай бұрын
Thanks so much
Buena reparación todo no esta perdido tantas maquinarias que sé pueden recuperar y las desechan👍
@VanoverCustoms
6 ай бұрын
Indeed
Love the music and editing, forget all the naysayers! I was wondering if you would mind sharing a link to the VFD and Motor you used? I know you made this video years ago and may not even see this however I would be very grateful if you do 👍🏻
@VanoverCustoms
Күн бұрын
I don’t have links unfortunately. It was a 1hp kb sealed drive. The motor was 1hp sealed I got as new old stock from eBay Baldor. 220v 1725rpm
Gosto muito de restauração de máquinas. Excelente trabalho. 🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
@VanoverCustoms
11 ай бұрын
Thank you
Thanks for the video. I'm just starting a restoration with a very similar 17-600 and found the taper is completely destroyed. It seems that the original tapers were barely hardened and get gulled very easily.
@VanoverCustoms
2 жыл бұрын
Yeah I had similar issues. It’s a good drill press
Nice job! Greetings from germany
@VanoverCustoms
3 жыл бұрын
Thank you.
artist 👍👍👍
@VanoverCustoms
2 жыл бұрын
Thank you
O meu sósia. Tudo ao pormenor. Gosto muito do seu trabalho e conhecimentos. Obrigado
@VanoverCustoms
6 ай бұрын
Thanks
You do excellent work. I subbed you.
@VanoverCustoms
3 жыл бұрын
I appreciate it
Ficou sensacional a reforma.Você soldou ferro fundido com mig ,com arame normal.
@VanoverCustoms
6 ай бұрын
Thank you. Yep
Great video AND music!
@VanoverCustoms
6 ай бұрын
Thank you
Beautifully restored. It seems you really like this blue color, I'm just wondering how it looks like after few days with oil on it.
@VanoverCustoms
2 жыл бұрын
It’s really dirty lol. No more of this color. I like it but my next restos will be different colors
Awesome 👍 عمل رائع
@VanoverCustoms
6 ай бұрын
Thank you
Muito bom !!
@VanoverCustoms
6 ай бұрын
Thank you
Красавчик 👍
@VanoverCustoms
7 ай бұрын
Thank you
Nice restoration . I know it takes a lot of time and effort for a project like that . I have restored a couple of industrial air compressors . What kind of VFD is that ? Look forward to some more videos !
@VanoverCustoms
3 жыл бұрын
Thank you! It is a kbac 24d they are great vfds good because they have a sealed box and an easy to use interface
Great video! I’ve restored one of these and have three more in queue. They are quite fun. Question; did you buy or build the motor adapter? I could use a few.
@VanoverCustoms
2 жыл бұрын
Thank you I build the adapter plate. It was pretty easy to make if I remember right
Cool colors👍. I loathe Battleship gray on equipment.Bright so one can see all the parts. You need a Hydraulic press.👍
@VanoverCustoms
3 жыл бұрын
A Press is on the short list
Lovely job! I'm planning to add VFD to my drill press - did you just leave the belt in (say) the middle pulleys?
@VanoverCustoms
2 жыл бұрын
I keep the belt in the lowest setting because I use it for tapping a lot but I can move the belt if I needed to go faster faster
Nice work on the drill press! What wire did you use to weld the table and base and what kind of paint?
@VanoverCustoms
3 жыл бұрын
Automotive paint. Basic solid core Mig wire. Mig is not the best thing to use but it did work Tig would probably be better
I tried the same paint stripper as you and even though I have another brand new can of it, I won't ever use it again, Enough said. I started using Citrus Strip and it's the best stripper I have ever used for several reasons.
@VanoverCustoms
2 жыл бұрын
Yeah stripper works but it has its cons
Um sonho
@VanoverCustoms
6 ай бұрын
Thank you
Great job, man! Do your drill press have a 1/2 HP motor?
@VanoverCustoms
2 жыл бұрын
1hp
👍🏻👍🏻👍🏻
@VanoverCustoms
2 жыл бұрын
Thanks
is the inner race on 87593 spindle bearing recessed on one side?
@VanoverCustoms
11 ай бұрын
Not sure so long ago lol
Also, where did you get that lamp you installed around the quill? Nice!
@VanoverCustoms
3 жыл бұрын
I think I got it on eBay. It was listed as a milling machine quill light
Great sound track.
@VanoverCustoms
3 жыл бұрын
Thank you
How do you have the confidence to just take every piece apart from the get go🤯
@VanoverCustoms
3 жыл бұрын
Just went for it
@michael7324
3 жыл бұрын
@@VanoverCustoms And you did it all in 17 minutes.
Great work and I do like the colour, what shade of blue is it?
@VanoverCustoms
3 жыл бұрын
5365 is the color code
@ianowen5123
3 жыл бұрын
@@VanoverCustoms Thanks, which colour chart? It almost looks like the blue Myford used on their late cylindrical grinders.
Really awesome your restoration How much drill press cost please ?
@VanoverCustoms
2 жыл бұрын
2g maybe
@mr.ranyhomemade2466
2 жыл бұрын
Over here second hand from Japan 5G it over my budget
Thanks for video. I wish these kinds of videos came more. It would be better for you to add some repair work without interrupting it for us. feel free to extend the video. we are more upset that short videos end quickly.
@VanoverCustoms
3 жыл бұрын
Thanks for the feedback
Nice work.. Question, I can't get the drill chuck of my delta. Any ideas on how to accomplish this with messing things up? I don't have any wedges so that's another question lol. Where can I get some or what else can I use to do the same thing? Thanks. And again, liked the vid and how you restored yours..
@VanoverCustoms
2 жыл бұрын
Wedges are best they are cheap and work
@VanoverCustoms
2 жыл бұрын
I got mine on McMaster Carr or Amazon
@VanoverCustoms
2 жыл бұрын
You can also use heat just need to be careful
Turned out great, new to your channel have a shop of my own like you and love the work! Few thoughts with those cast parts, I would be careful with a scaler and maybe think about brazing next time, welding cast is so hit and miss. But again great job!
@VanoverCustoms
3 жыл бұрын
Ok great tips. I’ll keep those in mind. I do have a tig welder now so cast repair might go better might not. I have done a few repairs since then with mixed results. Depends on the casting I guess.
I am recently restoring a lathe and I am not happy with the paint that I chose. What type of paint have you been using on your restos?
@VanoverCustoms
3 жыл бұрын
Automotive paint
Really well done, where you based out of?
@VanoverCustoms
2 жыл бұрын
Thank you. Chicago
What do you do to keep the bare metal from rusting?
@VanoverCustoms
Ай бұрын
I use fluid film
Is there a reason you use the filler ? the base surface looks fairly good.
@VanoverCustoms
3 жыл бұрын
It wasn’t bad but I wanted to get the surface as smooth as possible
can you post a link to the "bel aire" style paint you used? It's beautiful.
@VanoverCustoms
6 ай бұрын
I don’t have it sorry
How did you mount the column to the drill at 3:01?
@VanoverCustoms
3 жыл бұрын
With a hole saw of the same dimension as the column and some electrical tape
so u welded the cast-iron table whit a migwelder...no preheating or anything?
@VanoverCustoms
3 жыл бұрын
Yep. I preheated, not ideal but at the time I didn’t have a tig, I do now but it worked at the time
@hedning003
3 жыл бұрын
@@VanoverCustoms u hade me worrying there for a bit😆
@VanoverCustoms
3 жыл бұрын
Lol
Just to grind down those welds to surface must have taken forever. I know, I was doing the same thing last night.
@VanoverCustoms
3 жыл бұрын
Lol yeah
Can you powder coat over that filler? And I love that your wife is helping you out, mine can't stand the smell of my garage.
@VanoverCustoms
8 күн бұрын
No power coating over filler due to heat. You can paint though over filler.
Nice work overall! May I humbly suggest that your next restoration be a hydraulic/pneumatic frame press? (It's killing me to watch those bearings get hammered on!) Also, your paint work is fantastic, on both this and your lathe, but MAN would you save a lot of time and effort if you would just use some hand cleaner, brother! 😂
@VanoverCustoms
3 жыл бұрын
Thanks man. I need a press bad for sure. I know more know than I did but still need one. Which hand cleaner would you suggest. Are you talking about paint stripper?
@kevinnathanson6876
3 жыл бұрын
@@VanoverCustoms NOT paint stripper!!! God Lord, you don't ever want to put that on skin! Heavy rubber gloves when using that. I just noticed all the greasy fingerprints on that fresh paint that you then have to clean off... Just keep a bottle of GoJo or Goop or the orange-smelling stuff that I can't remember the name of right now... Ten seconds with that and a paper towel and most of that grease will be gone. Too much work to clean later!
@VanoverCustoms
3 жыл бұрын
O I thought you meant on the machines. For my hands lol. Yes I have Gojo. Lol. Glad I cleared that up. Thanks
What songs is this? Congratulations from Brazil
@VanoverCustoms
2 жыл бұрын
Thanks
What is the model of the VFD
@VanoverCustoms
2 жыл бұрын
genesis by kbc
Did it in fast motion
@VanoverCustoms
6 ай бұрын
True
Hi! Can you specifi the color ?
@VanoverCustoms
2 жыл бұрын
I don’t remember sorry
Your face looks like a russian singer Decl(Дэцл).
@VanoverCustoms
2 жыл бұрын
Lol
👏🏻👍🏻🇪🇨
Nice resto, but really not a fan of either music or it's volume. Yeh, ok sure, I can turn the sound, but then when you talk to camera I need to turn it up. Sure, I can do all that. It's not hard, but it takes away from the viewing enjoyment of your video.
@VanoverCustoms
3 жыл бұрын
Thanks for the feedback
You would be happier replacing that Jacob's chuck with an Albrecht.
@VanoverCustoms
Ай бұрын
I like both. I have both
@herbholmberg4474
Ай бұрын
@VanoverCustoms In reading on various machinist websites recently I have read so many bad things about the quality of new Jacob's chucks it has spooked me on new Jacob's chucks. That was what prompted my comment.
@VanoverCustoms
Ай бұрын
@@herbholmberg4474 you are right. The one in this video was made in US but I have also read those comments. To be honest I like the keyless chucks but have mostly been using the keyed super chucks these days they have more gripping power especially for taps and less likely to spin drills. I do not buy the new Jacob’s super chucks I try to find new old stock units on eBay.
Is that Dream Theater?
@VanoverCustoms
2 жыл бұрын
No it’s not
Did I mis the details on the light at 13:11 ?
@VanoverCustoms
3 жыл бұрын
No I just installed it of camera. It’s a magnetic quill light from eBay
@lucasgarat
Жыл бұрын
Can you post the link on eBay?
Love your restorations, not a fan of the music
@VanoverCustoms
3 жыл бұрын
Thanks good to know
Music?
@VanoverCustoms
3 ай бұрын
Yeah
@staszekjp2572
3 ай бұрын
@@VanoverCustoms name song?
video would be better if you explained what you were doing, with what, and better camera angles that allowed the viewer to see more detail.
@VanoverCustoms
6 ай бұрын
Thanks
Music,video,job.O.K!
@VanoverCustoms
2 жыл бұрын
Thanks
i did the same thing on a old drill press take a look to my video
@VanoverCustoms
6 ай бұрын
Great
It's a wonderful work you've done. However, the music is headbanging awful. Had to mute most of the video.
@VanoverCustoms
7 ай бұрын
Thanks
Great work, not a fan of that color. More a machinery gray traditionalist guy myself.
@VanoverCustoms
Ай бұрын
Fair enough!
I have that same drill press, good to see another one rescued but...that color is just wrong on any Delta machine.
@VanoverCustoms
2 жыл бұрын
Lol