14:00 Your live center is very lively!

Love the steady rest you borrowed from Neptune's shop 🙂 Cheers

Great project! I really like how you re-purpose materials and I hope that 6.17k subscribers soon becomes 617k! You are fast becoming one of my favorite machinists channels.

13:00 - Hurah, Jeremy's rusty scrap. 13:45 - "CENTER"... a relative term :) Great video as always. Thanks.

@ADBBuild

Жыл бұрын

I've never seen a center move that much! I wonder if vibration in the machine was making it look a lot worse? Tends to mess with the camera.

@JeremyMakesThings

Жыл бұрын

Turns out, the rusty junk doesn’t like to stay in place well in the three jaw chuck, but concentricity wasn’t real important on this one.

Well done man. I love your recycling of old machinery and rough raw stock!

I did, I really did. I love it when an old broken-down piece gets a second chance.

Really nice video and really nice work. And indeed, repainting these tags is a challenge. (witch I screw up every time)

Oh wow, that tailstock ! 😬

I do like your steady man. It is a steady piece of an art. Will find where is the video about it. :-) Cool videos.

Still nicer and much more accurate than my early 2000's China-made Delta.

Definitely stealing the "far from perfect, perfect from far" line, that describes pretty much everything I do haha

I'm really liking your content, glad rotarySMP gave you a shout out in his video. Keep it up bud...

Absolutely Feckin Awesome

I love these old drill presses. Thanks for saving this one!

WELL DONE, REGARDS R.

nicely done

I rebuilt a DP-220 (floor model) several years ago so this brought back memories. I bought the same bearings from Hammersmith. It's been a nice machine but it has a bit more runout than I'd like (not bad for woodworking). You've inspired me to finally take it apart again and figure out if the problem is the chuck or the spindle. I love these old machines for appearance alone, they just look nice.

Wow, I was white knuckling the whole time you were machining that bearing out! You have more guts than I!

Much, much better than Perfect from Far……. Thanks for the ride. 👍👍😎👍👍

The exception to the endmill rule is - I opine - using them to flatten the bottom of a hole.

Amazing !

Tips They make special epoxies for fixing up minor oopsies in bearing seating surfaces. For a more permanent and professional fix there is a brazing material used to resurface automotive exhaust and or intake valves. This stuff can be applied with oxyacetylene gear and ground to a suitable finish for Morse tapers and such. Just don’t ask me the name of the stuff I forgot it five seconds after I heard it.

Nice addition to your shop. Enjoyable series.

Soft focus for the win. Thanks for sharing

Lovely result Jeremy. I still can't believe you got that for free from the side of the road - that just doesn't happen around here. Great find and great job bringing it back to life. 👍

@camillosteuss

Жыл бұрын

It happens everywhere, but not often... I remember seeing a `yuge blacksmith`s hammer once, left on the street in front of a house, i was a kid back then, but the people were carrying it out and left it there until gypsies took it a few months later... It had to have had at least 3 tonnes... I`ve seen stuff tossed out everywhere, you just have to be at the right place in the right time to find a thing being carried out to be left for scrap... Not saying that its a commonplace occurrence, but old shops close down, old people pass away and morons inherit marvelous machines that are worth more than their pathetic lives and all the generations they will spawn could ever amount to... But they toss it out as junk to be smashed and melted into brake rotors, as they are scum sucking slime that knows not what true marvels of mankind are and what tools practically built the world they live in today... Its a sad thing, but it is what it is since the time of Cain and Abel... Nihil novi sub sole...

@CraigsWorkshop

Жыл бұрын

@@camillosteuss We live on a small island state, with a low population. We have never had any machining or mechanical industry to speak of either. Lastly, everyone here seems to know the value of "things", which means not much gets thrown out! I am not complaining though, it is nice not to be surrounded by wasteful people. 🙂

Great work madman. Kicking off my own 40's Delta resto soon. Dying to get going. Thanks,.. real nice.

Respect for trying to save the cracked clamp ring by brazing. Keeping it original etc. 👍 A lot of the time that doesnt work long term on something like a clamp ring, the reason they break there is because the forces are huge.

loctite 638 is for upto 0.25mm slop. So thats also a way to go if you get spindle inserted in there to keep thebearing centered.

Hot spit shine has done great job. lol

Fun to watch as always ! Thank you 🙏

That was really fun to watch! Great restoration job! :)

Excellent job!!!

Great job, sir!!!

Looks great!!

You live centre was going up and down like a fiddle players elbow!!! Stavros

Looks great to me, great video man,keep'um coming.

Lovely drill press

"Time to go surgical". Another good one

That is one lovely piece of equipment. I wish it had annular contact bearings in the spindle.

If you hammer brazed or Silver soldered joints, then anneal it, less chance of cracking.

great job on the delta drill press and im going to definatly subscribe. thumbs up.

In a situation like that I have used JB Weld with some saw fillings mixed with it then machine it size.

After you drill into that piece of sacrificial wood, make sure you sterilise the drill bit. 😁

Nicely done - having the mill style table on a drill press can be very handy for when you want hole patterns that are in straight lines and if the dials are still good, makes spacing them easy as well! Does eat into the Z height substantially though.

Hi Jeremy I turned down the wreck end to take a impact drill. It worked great

Very nice work. It's too bad you can't find an original table.

Stephan Gottswinter, another KZread creater, was up against the same thing with a drill press with the tapered nose, of the quill spindle, gauld up. A reasonable amount of galling I understand is okay🙂 If it was mine, it would be just perfect…it’ll still work fine. And for me, you overcame some serious challenges there. Good job👍🙂 And thanks for the ideas for making homemade tools to fix stuff😉 I appreciate that😁

@davidsnyder2000

Жыл бұрын

Thanks Jeremy for a cool video with some teaching in it.

fuck that was funny 🤣🤣🤣 im sitting here trying to sort out business things and just sorta half listening watching 11:00

Lmao @ the caveman style steady rest, I love it

👍

Nice work! Enjoyed watching. Have a suggestion for you. If you haven't read David Pye's "The Nature and Art of Workmanship" please do. You will find the concepts interesting. Thanks for the look and your skills.

Very nice. Will the taper on the mill be next???

wow thats awesome you are great in what you do!! I am in the process in doing a 1950 table saw so far so good we stripped it down to bear metal and re-painted every thing new 3hp motor new bearings and now we are working on the electrical switch and new cords this will last another 70 years! do you do machining on the side?

Nice video! IMHO, the main reason drill presses are very poor milling machines is a lack of stiffness in the horizontal plane. Even if you were to upgrade the spindle bearings, it would chatter horribly and dellect a lot.

OK, now you have a pretty drill press, get to work on that lathe!

Amazing. Amazing video. I'm curious if you removed the chuck off the taper to put the stop lock collar on. For a few dropped the whole spindle? Which is the trick I just learned a few weeks ago.

@JeremyMakesThings

Жыл бұрын

I think I took the chuck off again.

“Far from perfect, perfect from far..” Going to replace “looks good from a galloping horse”

@CraigsWorkshop

Жыл бұрын

The guy I used to work with would always say "A blind man would be pleased to see it!" - I don't know if that's an acceptable thing to say nowadays, but it did always paint a picture for me and cause a fair amount of giggling. :)

@DrewDiaz

Жыл бұрын

@@CraigsWorkshop “maybe that’s good enough for your house” & my all time favorite “what do you do for a living”

@CraigsWorkshop

Жыл бұрын

@@DrewDiaz 🤣 brutal

You must be working with TOT and Chris.

Nice restoration. May i ask where you got the "screw rivets" for the Delta badge? Thank

@JeremyMakesThings

Жыл бұрын

McMaster Carr, they call them “screw nails”. These were “size 2”

I inherited an old Rockwell drill press that looks a lot like yours. Where did you find the parts diagram? Thanks

Why didn't you create a new pair of slots for a square sided tool to tighten? You didn't have to create a new threaded bush, just new slots to make it easier to tighten (and loosen next time).

Hello, I have similar unit I need parts for it can you tell me where I can get parts

I can tell you're married or have a gf, all that opening pickle jars really came in handy getting that ring out 🤣

hi there, i cannt see part 2 1942

@JeremyMakesThings

Жыл бұрын

kzread.info/dash/bejne/gZeXx9CBprW_itY.html

Far from good, but good from afar

hes a serial repurpiser .. not clickspring .. but very very watchable ..

OMG, you made a mistake. I think you have given away your time warping secret. Everything set in the 40's until the shot of that carbide tooling. SO, I have a technical question. Which way did you warp,, seriously. Did you take the carbide back, or send the parts forward. I suggest you recut this video so that no further secrets are divulged in your work. And for GOD's sake if your see plain white vans parked across the street. GO back and never come back to the future. JUST SAYIN"