Inside a Drill Press
Тәжірибелік нұсқаулар және стиль
Restoring and upgrading the drill press from my grandpa was a fun project exactly to my liking. The variable speed is incredibly useful, and I can finally run all tools at the right rpm.
The VFD is a Sourcetronic ST 500 400v 1,5kW for the 1kW motor. It's not sponsored, and I paid about 260€ for it. You can get much cheaper ones, but I had a bad experience with one of them and decided that investing a bit more into a quality one made in Germany is a good idea. I have no regrets.
Same with bearings and belt, which I got for 60€ total. I used cheap bearings for different projects, and they broke way too early. This nice drill press deserves nice hardware, so I went with SKF bearings.
Support me here: www.patreon.com/mariushornber...
or support me through my Amazon wishlist: amzn.to/2QoQbhw
Follow me on Instagram: / marius.hornberger
*Analog rpm meter: amzn.to/3Wt0FLA
*Hall-effect sensor: amzn.to/3veK3v1
Alle Links mit "*" sind Amazon Affiliate Links.
Marius Hornberger ist Partner am Amazon Affiliate Partner Programm
Enjoy the video!
How To Properly Restore a Drill Press
Пікірлер: 415
Thanks grandpa for this awesome tool!!! I miss you
@williammorris1763
Жыл бұрын
You had me at middle finger. 🙂
@hermannausowl
Жыл бұрын
Hallo Marius, eine Frage, die mir seit Jahren durch den Kopf geht, bist du mit Eugen Hornberger verwandt?
@MRrwmac
Жыл бұрын
Marius, I’m sure your Grandfather is glad to see you upgrading his drill press and especially that you are going to be using it. I’d put a little sign on it, "Grandpa’s Drill Press”.
@lukeamato2348
Жыл бұрын
That tachometer is a nice touch
@BrockGrimes
Жыл бұрын
Light and auto oiler?
I think you have honoured grandpa with that restoration and upgrade. Nice work
OMG, loved the speedometer! So old school and new school at the same time. Great work as always.
"I don't really know how to do that so I'll just do it" - inspirational advice. Thanks
Awesome work. Those bonus switches have me excited to see what's next.
What a great job you’ve done, I’m sure your Grandpa would be very proud and pleased.😀 Years ago engineering was seemingly better in many ways than today 👏👍😀
@RuiVascoMonteiro
Жыл бұрын
Tools built for quality and to last, vs. tools built for a budget and planned obsolescence
@antonoat
Жыл бұрын
@@RuiVascoMonteiro Totally agree with you and isn’t it a shame! 👍😀
Man that is a very sturdy, very well designed drill press! It deserves all the love and attention, even more because it came from your grandpa. Make him proud and use that tool to make awesome projects.
Your grandfather would be proud of you, I love the idea of disassembling the old bearing to press in the new one. I never thought of that. Great video!
Awesome rebuild... I especially like the way you sunk the base into the cabinet... I just bought a new drill press, and I may attempt that "sinking procedure"...
I just found your channel and thoroughly enjoy all your content. This one is a great one to watch. Your grandfather would be so proud. His legacy will live on through you. Well done!
@JustineArchibald-yj5jt
Жыл бұрын
Led me to think
Love these electrical modification videos! Keep them coming!
Always amazed at everything you can do!
Marius, thank you for all the videos this year. Happy holidays to you and your family, take care!
Absolutely incredible!
fantastic work Marius, well done!
Excellent work and quite entertaining. Thanks!
The parts of your drill press look exactly like my late dad's Craftsman 15' drill press. Which I need to restore. So your video helps with removing parts.
out of my 130 subscriptions you are the most entertaining by far keep up the good work. 👍
I’m always impressed with your work you make a difficult job look so easy and your grandfather would be so proud
Eine tolle Maschine, super Restauration und eine schöne Erinnerung an Deinen Opa. Klasse! :)
You sir, are amazing! Fantastic restoration! I love the improvements!! Great job!
This video is incredibly dense with stuff I have no idea how to do - truly watching a futuristic magician at work!
absolutely superb. thanks for the content
Excellent.👍 Your grandpa would be very pleased.
Love what you did here, the editing is great and that analog rpm gauge with the yellow baacklight is very fitting! It's the cherry on top, very classy
Great project! Your grandfather would be proud. And I loved the stop-motion video for the vise!
Wow, what a beautiful job!
very nice restoration of drill press, and cool vise stop motion!
Literally about to do this project. Glad I watched
c'est génial comme upgrade ! Bien jouer, merci pour la vidéo.
Very nice restoration Marius, I’ve really enjoyed your channel over the years, you’ve definitely been an inspiration to me and my channel. Keep up the good work and keep the content coming, more woodworking content please lol. Take it easy and Rest in peace gramps.
Bravo! Your Grandpa would be very proud of your dedication and accomplishment! Best of luck!
What a delightful restoration. I hope using this tool brings up fond memories of your grandfather
Brilliant project, love the refurbishment and adding a modern/retro twist with the analogue rpm gauge.... stunning & very practical!
Amazing job, not that i had any doubts.👏👏👏
Excellent video! I inherited many tools from my grandfather as well and appreciate the care you took with this quality tool worthy of restoration!
Awesome Marius. As always, your skill level and knowledge are impressive! Merry Christmas!
You are an inspiration, sir!
Great to see you measure the full extension runout, proffesional. Nice work.
That a great job to restor like you did your heritage !!
Well done 👍 You always satisfy. Thanks for sharing. I like your style.
You did a fantastic job restoring and improving that drill press. You could not buy such a well built machine today.
Marius, this video is very enjoyable. I have enjoyed many of your projects. Your attention to communicating the detail is fantastic and your engineering/ manufacturing expertise is impressive. Please keep videos like this restore coming!
Great quality video Marius. Happy New Year 👍
Great job looks like a significant upgrade. The RPM meter is really cool!
Wonderful vid. What you have done to the drill, far exceeds anything you can actually buy.
This project is so cool. Congrats from Mexico!
WOW! I'm impressed. 👍👍
It really was a pleasure to watch this 👍👍😃
Awesome, as always! Your Grandpa must have been so proud if you, and probably still am!
Love the stop motion. Also very nice drill.
Excellent video and nice restoration with great upgrades! Tachometer looks cool! 👍😎 Yeah, back in days, everything was made to last forever!
Brilliant video. Do more!!
Superb, you really are a talented bugger. 👏👏👏
Wow, what a great idea, nice upgrades
You are amazing, Marius! I come to watch these videos, not to make stuff like you do, but because they are so entertaining and fun to watch. Your brilliant sence of humour and that is also a sign of great intellect :)
Really great video. What a good tool that you made so much better. Greetings from California.
Great work bringing back a very useful tool. I love the tachometer on the front. I think I may have to copy that idea. I even have an old tach from an MG.
Great video, your granddad will be proud of this 👍
GEIL! Du übertriffst dich immer wieder. Schöne Weihnachten wünscht dir Markus
I was so impressed to see from time to time, how the family supported You. (Dad, is my favorite. But love and greetings to them all 😀) Well, it's heartwarming to see this "Family" drill-press in such capable hands. Thank you, Marius. 👏🏻
Holey Moly - probably the best video I have seen on DP restoration/modification. I enjoyed watching your approach & execution on everything! Love the still pic animation towards the end ;-) A very nice drill to start with, and one of a kind now - your grandpa would be overflowing with pride. You just got a new subscriber!
Very well done indeed, Marius.
Great! Merry Christmas, Marius!
Merry Christmas To you and yours !!🎄🔧🔨🗜🔩🎄
You are amazing! I learn so much from you're ability to make or repair just about anything. Thank you for sharing!
I had one very similar, Hare and Forbes, maybe only 10 years old. I felt exactly the same as you about the changing of belts and it was a blessing in disguise when the tensioning lever sheared off. Pulled it apart to salvage whatever useful bits there were (so many parts look identical to yours) and bought a direct variable speed drive Nova Voyager to replace it. Excellent tool, worlds apart from what I had. Looks like a great conversation you've done, nice job!
Grandpa would be proud, awesome and through video. Thanks for sharing :)
@Mariushornberger257
Жыл бұрын
Hello!! Send a direct message ⬆️👆⬆️. You have a giveaway🎁🎁🎁. Congratulations
Nice job Marius Grandpa would be pleased
Качество видеоролика и проделанная работа вызывают восхищение. Ждём следующие видео 👍🏻
Schön, dass die alte Maschine bei dir ein neues nützliches Leben hat !
So satisfying 😌. And the variable speed is so awesome 😎. Your videos keep getting better and better! Merry Christmas!
Your channel is amazing, you deserve millions, millions subscribers
I'm sorry for your loss, a grandpa is definitely a special person for men, it's like a second father, I'm sure that he is proud, God bless you and your family, take care:)
I think your grandfather would be pleased with the restoration and impressed with the upgrades. I know I'm impressed with the upgrades. Nice work.
I’m sure your grandfather would be proud. Nice work
The analog RPM meter is my favorite. It adds extra class to an already classy drill press!
Endgeil, wie sich am Ende der Schraubstock "selber" zusammenbaut!!! Viel Arbeit für das Stückchen Film, aber super gemacht!! Insgesamt tolle Restauration. Und dem Opa ein Andenken gesetzt. Lob und Anerkennung!!
you make me want to restore some old tools, great video as always, greetings from Denmark
I'm always impressed with old motors. They were overengineered and really just last forever. Great editing!. We love your content, love your projects, but REALLY love the presentation. A week of filming cut down to 16 minutes, but such a good watch!
Well done Marius!
Nice work Marius.
What a great tribute to your grandfather.
Another great video Marius .
You are a weapon and that drill press will be so nice to have around. Great video!
Very nice restoration/rebuild. The RPM meter was an especially nice touch.
Also ich gebe zu, ich beneide Dich um diese tolle Bohrmaschine! Wieder zeigst Du das, was Du anpackst, dann gleich in Perfektion! Die analoge Drehzahlanzeige, nochdazu so schön beleuchtet, das ganze ist ein absoluter Traum!!! Wirklich Top geworden!!!👍👍👍🤩😍
Great video, you have really upped your game
the rpm meeter is really freaking cool man, nice idea
Sehr geil umgesetzt! Ich guck deine Video's sehr gerne! Schöner Humor, unaufgeregt... Kreativ..... keine Effektheischerei..... Mach genau so weiter, und genieß die "neue alte" Maschine.... habe selbst einige Maschinen geerbt, und Sie zu benutzen hilft mir, diese Person immer wieder in guter Erinnerung zu haben...... Frohe und ruhige Weihnachten Dir!
Alaways a great video Marius, have a good Christmas!
Awesome refurbishment video! Another instance of "They don't build them like they used to". And you've gained a really nice family heirloom.
Excellent as always!
Great upgrade!!! I just had the chance to restore one very similar to your, that i got for free from a neighbor. It was standing out at the yard for years so it was rusted and full of crap. Had so much fun restoring it!!
Very nice video. I have to get such an old drill press, they used to know how to make these things. And congrats to the animation of the self assembling vice.
Amazing how all those little vise parts know where to go all on their own!
¡Buen trabajo!, ¡la adaptación electrónica es impresionante! Desde España, ¡gracias por mostrarnos tu trabajo!
Excellent work, and I really like the analog tach. For my drillpress, I'm going to scavenge a DC treadmill motor and install it to eliminate the belt changing issue.
Your grandad wil be proud of you 8-) merry Christmas
That's a fantastic restoration and upgrade! Everything is excellent, from the quality of the work to the design of improvements to the camera and editing work. Thanks a lot for sharing!
@Mariushornberger257
Жыл бұрын
Hello!! Send a direct message ⬆️👆⬆️. You have a giveaway🎁🎁🎁. Congratulations