I did the Rinehart Xtreme Tru Dual system on my bike, a 2016 Roadglide Special in Black Quartz. Love love love them. The amount of heat reduction from losing the cat cant be understated. That cat puts out sooo much heat. Full system cost like 950 complete with mufflers, headers, and heatshields and that Rinehart sound....ohhh baby!!!

Perfectly explained! Best Video I have watched so far. I had absolutely no problem installing this head pipe💯👍

Another great video!! Thanks Ryan!! From OSHP (Ohio) Retired. Be safe out there brother!!

That's why I like my danmotto 2-1-2 headers I went with uses stock shields also. But at a $200 price point

Nice pipes and they sound badass..thanks for sharing and keep up the great work... Lance

Ryan, I just installed these headers on my 2016 Ultra this afternoon. Took me 4 hours as I took my time and was very methodical on how I tackled the install. The new pipes were just a hair larger in diameter than my Scremin' Eagle mufflers. Instead of banging on the mufflers and poking them with a screw driver & pliers, I took a quick trip to my local auto parts store and picked up an exhaust pipe expander for $25 and it did the trick by opening them up just the little bit I needed. Only took a few minutes. Plan on doing an Autotune with my V&H Fuelpack over the next couple of days. Thanks again for the great video. Not sure I would have tackled the job without it......I appreciate what you are doing for us bikers.

@RyanUrlacher

6 жыл бұрын

Great info, I'm going to have to check out that pipe expander. Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

Ryan, This is just what I need. The stock CATS are really a pain (literally) and my right leg feels like it's on fire at times. They aren't needed here in NH and will order a set in the next day or so. Your video is great and plan on installing them myself. Thanks for posting these great videos.

@RyanUrlacher

7 жыл бұрын

Our pleasure Ray. Enjoy the relief from all the heat. Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

I just got mine installed along with Cobra Neighbor haters. It's the best sounding exhaust system on the planet!!. Thank you so much for a great video so I could see what level of work was required.

@RyanUrlacher

6 жыл бұрын

Nice!!

great video as always guys,keep up the great work

@RyanUrlacher

7 жыл бұрын

Thanks for your support Eric

Dude great video as usual. Heck of a coincidence, I schedule my 2010 Ultra Classic CVO to go in to the speed shop and have the Bassani 2x2 head pipe installed with some RC Components mufflers this Wednesday. A week ago I had the 110" taken to a 113" as well. The exhaust should complement everything very well. Keep up all your good work Brother!

@RyanUrlacher

7 жыл бұрын

Awesome! That sounds like a great set up. Glad you enjoy the videos. It's our pleasure. Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

I.have the same set up except using Vance and Hines slip ons I went with the whole Bassani 4 inch megaphone mufflers!! I believe they sound much better but that's my opinion! Definitely more throaty than the V&H!!!

I had a Bassani Road Rage exhaust on my 08 Night Rod Special and it was great, so I bought this 2X2 header for my 09 Road Glide and it was great. Until I tried to remove the left muffler to remove the wheel for a tire change. The act of wiggling and twisting the muffler caused the rear section of the collector to crack and rip (best description for it). I removed the head pipe from the bike to inspect it and tried to manipulate it to close the crack and see about repairing with a weld. That action caused the rear cylinder header to tear away from the collector on the front edge of the weld using very little force with my bare hands (no tools, no clamps)! This was after only about 14 months and 10,000 miles of use! Never again, Bassani. Cheap steel. I'm going to try a FuelMoto Jackpot stainless steel 2-1-2 header now. I wish I could show pictures here of the Bassani.

OUTSTANDING Thank you for all your videos, not all apply to me. But, its great to have folks like you.

@RyanUrlacher

7 жыл бұрын

Awesome and thanks for the shout out! Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

@ajcaiati

7 жыл бұрын

Ryan, you are very welcome. Your crew is the best! They are real people just like myself, and they know how to have fun as they share their knowledge. Thanks again for being out there. PS. Thank you for your public service. SFMC!

Awesome thanks 😊

Great video! Thanks!

@RyanUrlacher

7 жыл бұрын

You betcha. Thanks for the shout

I run these on my 2016 SGS! Love them! I also run the Fuelpak3. Was told by Vance and Hines not to run AutoTune with these cause O2 sensors are close together, that they tend to give a false reading. Just what I was told others may get told something else. Great video! Keep up the great work

@RyanUrlacher

7 жыл бұрын

Yah, we know V&H says that and we are a distributor for V&H. They are being cautious and they don't want the tech support emails etc...We disagree a bit and run auto tune regardless of the O2 sensors being close. We have no cross-talk problems and have auto tuned a ton of bikes with the FP3 with many set ups. You choose.

@gaknskk

6 жыл бұрын

Ryan Urlacher interesting. Before I called support I was trying auto tune and seemed to be doing good and had learned 98 green blocks, I noticed a big increese in power and response and running much much cooler, then I put a screaming eagle high flow filter kit on and had a question for them so I called them and they told me the same about not using auto tune and they would map it so that's what I did and it still seems to run the same but gets hot af again... so I should go back and finish my auto tune and not use there map so I can get it cooled back down and maybe even get better performance ? Thanks in advance for any further info regarding this . I'm mechanically inclined but not so much on tuning my 16 sgs.

@gaknskk

6 жыл бұрын

I forgot to add I'm running a stock decat.

👍 that was quick, just watched you and your daughter do the Friday night video and you told a Patreon you would put this video on ASAP. And dam if you put it on. By the way, it was nice of your daughter to give her time to assist you. I am thinking you may have to get her a Harley of her own some day!

@RyanUrlacher

7 жыл бұрын

Rock on Richard! Thanks for the comments. My daughter does love riding on my Harley. We go for evening rides to clear our minds. It's becoming part of her soul........

Good Video Ryan and Lurch. If I would have been doing it I would have put a permanent loc-tite on the threads on those bungs, up by the heads. I would hate to have to redo that pipe dismantle if I didn't need to... just a thought from the DAWG

Looks good it is what I am looking for on my trike will contact them thanks

Awesome video! Does removing the packing from the V&H OS slip ons have a negative effect on the motor i.e. back pressure, performance or engine wear?

Great videos, thanks! Too bad they don’t come in black chrome. Any suggestions for something similar in black chrome?

Mint video guys - think these will sound good on my Iron

@RyanUrlacher

7 жыл бұрын

Rock on!! Thanks for the shout out

Thanks 🙏🏽

Well done fellas! I hope Bassani makes these for the M8 soon! My 17 Road King needs this upgrade. Thanks.

@RyanUrlacher

7 жыл бұрын

I might suggest just getting V&H Power Duals in our store. They are awesome and made for 2017 and up M8. Rick in our store can help you get hooked up. Here is store link. We have them in black or chrome. They are awesome: shop.lawabidingbiker.com/products/vance-and-hines-power-duals-for-2017-up-harley-davidson-touring-models

@sharkzf6

7 жыл бұрын

Thanks so much for the recommend! I have Bassani Pro Street exhaust on my 16 Softail Breakout. Great price-point and performance using the V&H FuelPak 3. My new M8 powered Road King needs a little boost and a "sound" upgrade. I will look into the V&H Power Duals you suggest. Thanks for all you do for us "Law Abiding" bikers! Ride safe!!

@richardbandolik1503

6 жыл бұрын

The Bassani are out and I just ordered some on ebay for $380.

If you remove your gaskets, you can make your own tool for under 5.00 to seat the new gaskets. A bolt, two washers and a nut is all you need. It works as well as the 45.00 version.

@RyanUrlacher

6 жыл бұрын

Great info William. Thank you for sharing with the LAB community. Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

Very nice! Left a message as I have a question re Bassani vs Vance & Hines Dresser Duals.

well done.

@RyanUrlacher

7 жыл бұрын

Thank you! Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

Would it be the same if you gut out the cat from stock pipes??

Ryan...u have a how to video on how to adjust steering head bearings on a dyna wide glide. I didn't see any in ur list. Thanks .love the videos lots of help...

@RyanUrlacher

7 жыл бұрын

Sorry Frank, we do not. Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

Ryan GREAT video once again, only recommendation i would make is to use a set of snap ring pliers to remove the cir-clips

@RyanUrlacher

7 жыл бұрын

Can't use regular snap ring pliers. There are no holes in cir-clips brother. We've done it for many years now. Works fine. Thanks for watching.

@richmann3095

7 жыл бұрын

Ryan, i know they dont have the holes but trust me they work to remove the cir-clips... i use them all the time for head pipe installs.. next time you do one give them a shot if you have a set in your tool box

@RyanUrlacher

7 жыл бұрын

Okay, great. Rock on. Many ways to skin the cat. Thanks for commenting. We'll see about trying your method.

I have a 2007 Fatboy and I need true Duels before next weekend

I just ordered mine from Revzilla along with some neighbor hater slip ons.

@RyanUrlacher

6 жыл бұрын

Hahahha. Rock on

Excellent video! Just ordered these pipes. Can you offer a base map recommendation on the fuel pak 3 you reference? I will have these pipes with the neighbor hater slip-ons.

@RyanUrlacher

6 жыл бұрын

Choose a map with the power dual headers, high flow intake, and twin slash round exhaust. Should get you close, then you can auto tune. You can always contact Vance and Hines and have them make you a custom map. Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

Gday Ryan I’ve got the same set up Bassani 2x2 and titan mufflers my question is what map did you use on the FP3 can’t seem to find a match, it’s a 103 with a hi flow filter, great video thanks

Do they make em in black for my blacked out Road King eSpeciale'?

does this pipe put even pressure out each side like true dual or is it more of a 70/30 split?

Thanks for video, Im doing my exhaust this week, you dont feel its important to use torque specs to tighten the head bolts? You say just make sure they are tight enough and thats good enough?

My thought on this are relieving some of the back pressure. I’m curious if this would help with this problem?

been looking for new headers and pipes to replace the stock ones on my 08 Ultra.

@RyanUrlacher

7 жыл бұрын

We try to review other exhaust besides V&H to be fair etc on this channel. I can say that we absolutely love V&H exhaust products, which is why we carry them in our very own store. We can get you hooked up if any V&H stuff catches your eye. shop.lawabidingbiker.com/collections/air-fuel-exhaust

Hey Ryan, nice video as usual. I’m currently running the stock header with the cat gutted with RCX 4” slipons. Do you think this header would show a performance gain over my catless stock header?

@RyanUrlacher

6 жыл бұрын

If it does it would be minimal. The cross-over tube isn't flattened down like the stock header, but that is about it. Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

Hey Ryan, I bought the same pipes for my 2015 Amber Whiskey Street Glide Special. Your video came in real handy getting the install completed!! One question, did Lurch have any exhaust leakage at the heads?? I installed without getting new exhaust gaskets and couldn't get them to seal. I have an inch pounds torque wrench and tightened to factory specs, 110 inch pounds. I had exhaust leakage from the back cylinder, tried tightening a little more with no luck. I am getting gassed at every stop light if the wind isn't blowing! I went to the dealer and bought new HD crush exhaust gaskets and repeated the process without any luck, still leaks exhaust. Called and emailed Bassani, they never returned any messages. Any suggestions???

As always Ryan your videos are A+ in quality of content. Question: are these pipes going to flow better than stock and are they suitable for stage performance upgrades ( say stage 2 ) ? Thanks in advance for answer . Also , I would appreciate anyone’s opinion as well . Thx

@RyanUrlacher

2 жыл бұрын

Thank you! Yes, they will flow much better. They don't have a catalytic converter in them. Lurch has a stage 1 intake and map on his bike. Ride safe & Ride Often! Check out this KZread Channel as we have a ton of free videos for you! Check out our useful for purchase videos: www.lawabidingbiker.com/buyvideos BECOME AN ECXLUSIVE MEMBER-GET BENEFITS: www.lawabidingbiker.com/patreon Leave a flat donation: www.lawabidingbiker.com/donate Shop in the Official Law Abiding Biker Store: shop.lawabidingbiker.com Subscribe to the Law Abiding Biker Podcast: www.lawabidingbiker.com/app Join our free email club: www.lawabidingbiker.com/emailclub

No gaskets used where the pipes connect to the motor?

Do they make the pipe for vt750 Honda ACE?

Hi. I know this is an older video but which map did you use for the bassani head pipe? Just chose the type of slip ons you where using then auto tune? Thanks.

First Great Video! Now the questions, First any Harley warranty issues with replacing these headers? Second question, hard to tell if your bike had an upgraded air intake on it, was it stock or did I just miss that part? I have a 2016 Road Glide Ultra, I already replaced the stock slip-ons with the High Output V&H, great sound and looks.

@RyanUrlacher

7 жыл бұрын

Thanks Kenny. Yes the bike has an upgraded intake. It's the Vance and Hines VO2 naked intake. shop.lawabidingbiker.com/collections/air-fuel-exhaust/products/vance-hines-vo2-intake-naked-for-harley-davidson Check with your local HD shop about the warranty. Most won't care, but we have heard some horror stories.

Great video so the Bassani pipes are the same as the stock harley head pipes tapered not flat

@RyanUrlacher

7 жыл бұрын

Thank you. Yes they are tapered just like the stock headers.

They sound great! Are those just the slip ons on those pips?

@RyanUrlacher

6 жыл бұрын

Vance and Hines OS 450 Titan mufflers. Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

I'm installing this now, I'm going to be using a power vision tuner. Are there any good reasons I should use the other style o2 sensors instead of the stock o2s?

I’m running a 17 RGS with fP3 and VH high output slip on’s with no packing. Which would you recommend the Power duals by VH or the Bassani head pipe?

@218422100

4 жыл бұрын

How do you remove the packing from these?

thanks for the video! i noticed no loc-tite used anywhere?

@RyanUrlacher

7 жыл бұрын

Nope, we don't use much loc-tite and never have any issues. With that said, use it if you choose. Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

When you change pipes and reduce the restriction, do you have to change the efi in that case or carb to suit the new exhaust.

@RyanUrlacher

7 жыл бұрын

We discuss that very issue in this video. Check the entire video out. Thanks for watching.

Is there a option for a 2017 107 milwakee 8 options? I don't see it on the site

@RyanUrlacher

6 жыл бұрын

www.bassanipipes.com/2x2headpipefor2017bagger.aspx

I Like

@RyanUrlacher

7 жыл бұрын

Rock on!

My 07 ultra came with Rhinehart pipes but they are not symetrical at the back of the bike (left side is lower, closer to the tire and setback about an inch closer to the motor. Can you suggest how to correct/adjust them?

@RyanUrlacher

6 жыл бұрын

Most of that can be adjusted at the clamp that seats the muffler to the head pipe and the mounting bracket that secures the muffler to the saddle bag support. Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

@rogerwalsh4018

6 жыл бұрын

tjonessc I had the problem. I had my wife stand on the crossover pipe at the bend while I tightened the clamp down. Kind of a last resort but it worked. !!

Do they make in black? And does it come with mufflers or u have to get them separately?

Hi Ryan. I now have these pipes on my bike with a stage2 SE torque cam upgrade 457 . I used the Harley pro street tuner but also added the smarttunepro which uses 18mm O2 sensors . Did so for warranty and also I figured Harley techs where I go know how to set all this stuff up Question: I know you recommend fuel pak for tuning but in your opinion how much am I losing out in terms of performance and tune ability going the Harley route verses fuelpak? Is it a whole lot of HP ??

@RyanUrlacher

2 жыл бұрын

The FP3 is just as good, if not better, than the HD tuner. HD mechanics always seem to want to push customers to HD only products. Ride safe & Ride Often! Check out this KZread Channel as we have a ton of free videos for you! Check out our useful for purchase videos: www.lawabidingbiker.com/buyvideos BECOME AN ECXLUSIVE MEMBER-GET BENEFITS: www.lawabidingbiker.com/patreon Leave a flat donation: www.lawabidingbiker.com/donate Shop in the Official Law Abiding Biker Store: shop.lawabidingbiker.com Subscribe to the Law Abiding Biker Podcast: www.lawabidingbiker.com/app Join our free email club: www.lawabidingbiker.com/emailclub

@stevec8836

2 жыл бұрын

@@RyanUrlacher thanks for such a quick reply .good to know Ryan . I figured as much as well . Are you guys running vented oil dipsticks after your stage builds For example fuelmoto or a1. I notice a little bit of sound coming out of head breathers after engine shutoff. Almost like it’s getting rid of pressure .

👍

Niiice I think Im going to pull the trigger on these. Which Map did you choose on the FP3?

@RyanUrlacher

7 жыл бұрын

We hesitate to tell you exactly which map to choose and defer to V&H tech support for that. I can tell you to pick something that's close. Power duals/High flow air etc....no perfect science to it. Just get it close

@TheScoonDogg

7 жыл бұрын

Ok thanks

@gaknskk

6 жыл бұрын

I have similar set up with a decat headpipe.... long story short V&H said they had to set my map because the bung holes are to close together and will give false readings while trying auto tune. So if you want to tweak it yourself for maximum performance using auto tune ya better get a different head pipe. In not sure what one I want to try yet. If anyone knows more on this subject please comment.

Just a random question I live in Kansas and deer are thick is there something I can put on my bike to keep them away?..

@RyanUrlacher

7 жыл бұрын

No, have not heard of any good products except for auto deer whistle things...sorry

@jerry-riverbluffbaggers3910

7 жыл бұрын

Thanks didn't think so.

RYan - Have you tried the Bassani pipes. IMHO they sound better than V&H and they are louder

@RyanUrlacher

7 жыл бұрын

This video is about Bassani Pipes brother. Check it out. I can tell you that we've installed V&H, Bassani, Python, and others. Header and mufflers. They are all pretty much the same when it comes to headers. Doesn't matter wich brand.....you can get as loud as you want. Straight pipes are straight pipes.......Thanks for watching and commenting.

Do I need to do anything to adjust my bike afterwards?

@RyanUrlacher

6 жыл бұрын

www.lawabidingbiker.com/fuelpak3

@mrclean28h

6 жыл бұрын

No matter they wil not fit my trike thank you

What is the main difference between these Bassani Dual Headers and Bassani Dual Down Under headers?

@RyanUrlacher

5 жыл бұрын

The down under headers are true duals; meaning they are completely seperate pipes. The 2X2 have a cross over pipe.

Great Video! One question though. When you programmed the EFI did you still use the standard baffle?

@RyanUrlacher

7 жыл бұрын

+broderick love yea we did. Thanks for the shout out!!

@brodericklove7165

7 жыл бұрын

Thanks man, I am following suit tonight.You guys are great thanks for everything I will be following and contributing

Tried to install the Bassani headers on my '23 HD Road Glide Special today and it didn't go well. The O2 sensors on the Bassani headers are not even close to the factory locations. The Bassani bungs are both at the top of the pipe close to the cylinders. i decided to return them instead of trying to find an extended sensor and starting over. The rear bung may have reached but the front is way too short. Have to question why Bassani didn't duplicate the O2 bungs location on the factory '23. With your help, I installed Bassani headers on my '18 Road Glide like you did in this video and I had NO problems whatsoever! Very disappointed in Bassani.

Someone told me that I would loose low end torque with 2x2 duals? Did you experience this?

@RyanUrlacher

6 жыл бұрын

Nope. Here's our article w/ more info www.lawabidingbiker.com/bassani-head-pipes/

I'm in the middle of installing my header pipes had the cat removed. When putting in back together how many threads should be showing past the nuts on the studs? I forgot to look before taking it apart and don't want to over tighten like you said.

@RyanUrlacher

6 жыл бұрын

I can't tell you exactly how many threads should show. Tighten them down evenly until they are snug. Check them after a 1000 miles or so. Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

*Carriage bolt near the collector.

Ryan, how is your mileage...any gains?

@RyanUrlacher

7 жыл бұрын

Putting any aftermarket headers without cats will increase performance & power. Alonge with a stage one air intake. Mileage as good as stock. Plus, tuning the EFI afterward will help things run optimally.

@kevincrookshanks2896

7 жыл бұрын

thanks bud, im thinking strongly on those basanni...like the fact you can you use your stock covers.

Didn't change gaskets?

@RyanUrlacher

5 жыл бұрын

We didn't, but you sure can if you want to. Ride safe & Ride Often! Here is a link to a bunch of our useful Free vids: www.lawabidingbiker.com/freevideos Here is a link to some of our useful for purchase videos: www.lawabidingbiker.com/buyvideos Want Answers & Information Fast? And help support us at the same time? Do you like the content we provide? Our patrons get answers to their questions/comments/feedback in less than 24 hrs and are part of our Private Facebook Group. If you are interested in being in this exclusive group you can get all the details at ==> www.lawabidingbiker.com/patreon If you haven't subscribed to the Law Abiding Biker Podcast make sure to do so. Listen in as we talk weekly about issues/items like this & so much more. You can listen on iTunes (Apple/IOS), Stitcher Radio (Android), or any other Podcast App ==> www.lawabidingbiker.com/podcast Join our free email club at /www.LawAbidingBiker.com/EmailClub. Only relevant content will be sent from time to time. Email club members are the first to find out about free or for sale content are given special coupon codes.

well if I had watched the video first before my first comment I could have saved myself.

@RyanUrlacher

7 жыл бұрын

LOL...no problem.....all good. Thanks for watching.

If guy did this his self will this black flag his warranty on a new Harley-Davidson 2020 !!

@RyanUrlacher

3 жыл бұрын

We always recommend you check with your local dealership. Ride safe & Ride Often! Check out this KZread Channel as we have a ton of free videos for you! Check out our useful for purchase videos: www.lawabidingbiker.com/buyvideos BECOME AN ECXLUSIVE MEMBER-GET BENEFITS: www.lawabidingbiker.com/patreon Leave a flat donation: www.lawabidingbiker.com/donate Shop in the Official Law Abiding Biker Store: shop.lawabidingbiker.com Subscribe to the Law Abiding Biker Podcast: www.lawabidingbiker.com/app Join our free email club: www.lawabidingbiker.com/emailclub

Please lose the background noise. I am trying to hear your voice over that.