Very nice video big sister

Beautiful video

@VioletHenning

2 жыл бұрын

Thank you very much!

Thank you for this very clear work-through

Cool tips 😎

Nice Sharing friend

@VioletHenning

3 жыл бұрын

Thank you so much. 👌

Very nice very good idea

Waooo nice tips thank you so much sister

@VioletHenning

2 жыл бұрын

You are so welcome thank you for watching 👍

Very Nicly. Explained

@VioletHenning

3 жыл бұрын

Thank you so much

Very simples, thanks

wow this looks truly easy

@VioletHenning

3 жыл бұрын

It really is that easy. 👍

by far the best explanation

@VioletHenning

2 жыл бұрын

Thank you so much it really means a lot to me. Stay safe!

🥰🥰🥰 love it

That's cool!

Very helpful!

💖

Ótimo! Amei!

i have been watching a lot of videos tutoríal. and only yours helpED ME OUT. thanks God bless you

@VioletHenning

5 жыл бұрын

Hello James i am really glad that you were able to find a solution here. Thank you so much for watching.

Nice explained mam thank you

@VioletHenning

3 жыл бұрын

Thank you so much!

Thanks for the follow. Nice demonstration on getting the gimbal balanced properly!

@VioletHenning

5 жыл бұрын

You are most welcome. Tha k you for the support.

Dope content easy to understand keep it up

@VioletHenning

5 жыл бұрын

Thank you buddy for the support man.

Gracias!!

thank you for the detailed info.

@VioletHenning

4 жыл бұрын

You are welcome friend.

Lovely smile

love

Hi guys remember if your gimbal gives you the overheat signal on the lcd screen on the handle, it may not be balances properly. Please switch it off and re balance it.

@VioletHenning

3 жыл бұрын

Yes there is a great video here: kzread.info/dash/bejne/gIqe0cScpMeaeJs.html

@technofeeliak

11 ай бұрын

Thanks very much. Some of the functions are still a mystery to me but I appreciate your instructions.

You’re really great!

@VioletHenning

3 жыл бұрын

Thank you so much for watching Heather.

Amazing explanation Violet! thank you!

@VioletHenning

3 жыл бұрын

Thank you so much Daniel i am really glad you took the time to comment! Stay safe. 🙏👍

Thanks for the info! Love your intro!

@VioletHenning

5 жыл бұрын

Thank you FoodieAnts 🙏

Lucky to meet you Violet! It´s a little complicated but I got it! thanks to yours advices :)

@VioletHenning

3 жыл бұрын

Hey there thanks for stopping by and i hope the video helps you. I have playlist on all my Zhiyun videos if you need any help.

Thank you very much. This is very informative

@VioletHenning

4 жыл бұрын

Hi there i am really glad. Thank you so much for the support.

Good info! 💯

@VioletHenning

5 жыл бұрын

Thank you for the support.

Good video thank you. :)

@VioletHenning

2 жыл бұрын

Thank you so much for watching

Thank you. Very helpful. :)

@VioletHenning

4 жыл бұрын

I am really glad i could help

Great gimbal 👌🏼

@VioletHenning

5 жыл бұрын

Thank you buddy and thanks for the support.

In the world of cool videos and unreal transitions, I liked and downloaded your video by the sheer value of information. I absolutely love your video. I will make sure to subscribe and watch all your other videos.

@VioletHenning

4 жыл бұрын

Thank you so much this means a lot to me

Thanks so much!.

@VioletHenning

4 жыл бұрын

You are welcome.

Awesome tutorial I'm not sure why Ronin gimbal users complained so much that the crane 3 is so hard to balance you seem to make it so easy and well explained thank you

@VioletHenning

3 жыл бұрын

Thank you so much i really appreciate it

@realyopikechannel

Жыл бұрын

because it is horribly difficult to balance and you have to fix the shitty locking plate with a screwdriver before its usable. as someone who owns this gimbal for work. avoid it at literally all cost.

That thing is cool! Might have to get one.

@VioletHenning

5 жыл бұрын

It truly is. If you need it and you can afford it, then nothing stops you. Hours of fun.

Thank you so much

@VioletHenning

3 жыл бұрын

You are very welcome.

Dear Lady, you should LOCK the other 2 axle motors when you are balancing the first one. As I see, the gimbal is pre-balanced. Otherwise, it is impossible for the gimbal to stay in such a balanced position when adjusting just the first axle (forward) balance with all other Unbalanced axles being freely unlocked.

Hey!Thanks for subscribing to my channel!Great work!

@VioletHenning

5 жыл бұрын

You are most welcome. Keep up the good work.

Now I want one of those lol 😍

@VioletHenning

5 жыл бұрын

The footage is really stable on these my friend.

Hey Violet you are a rock star of video, we have the Zhiyun M2 for a Sony Rx100 M3, we can’t hold the bigger DSLR’s anymore. Great tutorial

@VioletHenning

5 жыл бұрын

Hello my dear friends thank you so much. Ooooh i also want the M2 bit it is not available here yet. I love the smaller cameras. I have the Canon M50 to sub my D850 and D750 nikon big boys. Thanks so much for watching have a wonderful week.

thank you

@VioletHenning

3 жыл бұрын

You are very welcome

Dankie

@VioletHenning

3 жыл бұрын

Hi daar baie welkom!

This is a nice and easy video to understand about gimbals...i am looking at getting one and you made the balancing look sooo easy....thanks!!!

@VioletHenning

5 жыл бұрын

Hi BSP thank you so much.

@BlackSteelBlackSteelPromotions

5 жыл бұрын

@@VioletHenning Pleasure i been looking at the DJI Ronin S.....till I saw this one....do you have any footage with this beast??

@VioletHenning

5 жыл бұрын

Footage coming up on the next video.

@BlackSteelBlackSteelPromotions

5 жыл бұрын

@@VioletHenning I look forward to that !!!

Thats an amazing piece of equipment!!

@VioletHenning

5 жыл бұрын

thank you Dave, yes it has all the bells and whistles. my camera needs an update though....

@MrDMagz

5 жыл бұрын

@@VioletHenning I usually use a canon rebel t5i. its being borrowed now. so i've been using my phone a lot. can't wait to get that back though.

@VioletHenning

5 жыл бұрын

Wow you are a better person than me... My camera gear is my gold. I dont lend it out. I can imagine you cant wait to get it back. Great camera that.

@MrDMagz

5 жыл бұрын

@@VioletHenning Hahaha I'm kind of a push over. but its an in company borrow. but still, inside i just like to keep it with me haha

I have learned a lot from your video thank you

@VioletHenning

5 жыл бұрын

Thank you so much my friend.

@BRDXB

5 жыл бұрын

@@VioletHenning Will you teach me about crane 3

@VioletHenning

5 жыл бұрын

Anytime. If you need to know anything jist let me know.

Great video! I wish I had a video like this with my camera gimbell. The little details you mention are invaluable. Now ... Just want to see future movies xx

@VioletHenning

5 жыл бұрын

Hi Karen, thank you so much. Dont go anywhere, the fun is about to start. I am learning the ninja walk 😂😂

@RenLuuk

5 жыл бұрын

Haha! The ninja walk. Has to be perfected for sure x

@VioletHenning

5 жыл бұрын

You know how i look doing the ninja walk? More like a pregnant goose... Hahaha. But working on that. The bike rides are getting better now.

@RenLuuk

5 жыл бұрын

Yeah YOU! I am right behind you on my bike too !!!!!! 🚴‍♀️ 💨

Thank you madem.. very helpful... From india...

Thumbs up.?

@VioletHenning

2 жыл бұрын

Thanks so much for the view i really appreciate it.

That is very nice , but do you know it can use whit 1dx mark II ?

@VioletHenning

4 жыл бұрын

Hi Jaolong thank you. It should be oerfect with 1Dx2 i dont personally own one but most canons work with this gimbal. There is also a compatibility sheet on Zhiyun websit which will help you quite a bit

Have you had any trouble with the quick release plate latch. Seems like you really have to torque on it. Love your video really helped me out.

@VioletHenning

4 жыл бұрын

Hey my friend yes i did. If you see my unboxing video of the gimbal, there is a fix for your problem.

@ramonmoreno898

4 жыл бұрын

@@VioletHenning Thank You I just watched it. Your video was a big help!!!

@VioletHenning

4 жыл бұрын

Always glad if i can help

Plz make a comprehensive video on gimbal crane 3 for beginners as I told you earlier I did not even break its seal so for

@VioletHenning

4 жыл бұрын

I will do that for you on the weekend

Hi Violet, I noticed you're using a Nikon d750, int hte manual of the Zhiyun Crane 3 it only shows that it's compatible on the Nikon d850, I'm planning to get an upgrade on my current camera (Nikon d600) just to get to use it with Zhiyun Crane 3, do you think its ok with the d750? It clearly works well with it, why they say it only works with d850? Thank you!

@VioletHenning

4 жыл бұрын

Hi there, well it works with the D750 but it does not connect to the D750 so you cant co trol Zoom and focus through the gimbal. But you can put any camera on the gimbal and you will have stable footage. You just cant control the camera settings or start stop recordings from the gimbal. You have to do that all manually.

@malvaizquierdo9462

4 жыл бұрын

@@VioletHenning thank you for the info! Great video btw

thanks for the sub

@VioletHenning

5 жыл бұрын

You are welcome.

@check_about_right_fucking_now

5 жыл бұрын

@@VioletHenning :)

Seem like you have some amazing gear! What lens would you recommend to take close up photos? I have a Canon M50. Thanks!

@VioletHenning

5 жыл бұрын

Hi there if you want to take photos of people close up the a 50mm or 85mm lens is always the way to go. But i suppose you wa t to take photos of your woodwork, then i would look at a 100 mm macro lens if you dont need a wide angle, or a 24mm macro lens if you want a wide angle lens. But you will need to use the lens adapter since the M series doesnt have a large variety of lenses available yet. If there are any videos you would like to see please let me know. Thank you for the support.

@19woodworks

5 жыл бұрын

Violet Henning Well, actually no. Haha! I’d like to do to like....landscaping, scenery or my wife kind of photography. I have a lens that zooms in ok, but when it’s really close, it refuses to take the photo. My guess it’s because it’s not totally in focus? Maybe a video about micro photography or scenery photography? I’d be interested in those. Thanks!!!

@VioletHenning

5 жыл бұрын

Thank you for the comment. Okay I will do a video for you soon. If you refer to landscape then you need a wide angle lens. If you want to photograph kids you will need a zoom lens so you can be close or further away and dont run yourself to death. The main reason a lens dont want to focus is firstly the focal distance of that lens, and secondly, yes you guessed it... Light. Some lenses dont have a very low aperture and is therefore not so good in low light. But i will put a video together on it.

@VioletHenning

5 жыл бұрын

Oh and the only time you need a macro lense is for close close close photos of flowers, insects, and tiny objects you want to shoot in a 1:1 ratio.

@19woodworks

5 жыл бұрын

Violet Henning I see!! Yes, more like landscape, people kind of photography. I have so many more questions, but I will drop them little by little! Thanks!!

nikon d7500 is compatible with crane 3 lab gimbal?

@VioletHenning

4 жыл бұрын

I am not sure because i dont own a d7500 but you can check on Zhiyun website for compatibility list.

Does crane 3 support Nikon D850 + Tamron 24-70 2.8 G2?

@VioletHenning

5 жыл бұрын

Hellk friend sorry i was away on business. Yes it does.

It might be easier with some arms stay locked and unlock it step by step.

@VioletHenning

4 жыл бұрын

Hey buddy yes that is also a very good option.

Does anyone know how to get the crane 3s out of standby mode?

My gimbal is balanced but when I turn it on it swings to face me. Why? I can’t find any answers for this

@VioletHenning

3 жыл бұрын

Thats weird, it must swing to face away from you. Are you sure the arms are setup correctly and the camera facing the right way before you switch it on?

Hi syster,, My lab 3 has a light inclination towards right side after switching on ,. I m using bmpcc4k with cage, How to fix this,, pls help

@VioletHenning

3 жыл бұрын

Hi there you will need to re balance it again and after doing so, tilt it to the left and tilt it to the right. The camera should not move. Then switch it on. 👌

@nixcreations1943

3 жыл бұрын

@@VioletHenning when tilting to left or right camera not holding its position, it comes back to the correct level,.....

@VioletHenning

3 жыл бұрын

And your gimbal is switched off when you do the balancing ? You will have to keep moving and shifting the arms into the right position until the camera stays put. Then tilt it and it must not move. Then switch on. Let me know how it went.

Handling the camera is a different art. Hey buddy can control the aperture of camera lens and blur the surroundings to ur need

@VioletHenning

5 жыл бұрын

Hi buddy yes the crane 3 can do all of that. But my nikon d750 doeant allow it. When i uograde to the Z6 nikon it will. For now i can control the zoom and focus at least.

@abhishekdas3656

5 жыл бұрын

@@VioletHenning well can zoom and focus be controlled by android phones as well

@VioletHenning

5 жыл бұрын

If your camera can connect to the crane, yes. But if it is not compatible it is best to get the zoom and focus servo motors like i have.

I am able to balance my Nikon D850 on my Crane 3 Lab, but what cable do I use to connect my Camera Control to my Nikon D850?

@VioletHenning

4 жыл бұрын

Hi there, you need to check one of the cables that came with the gimbal that fits in your camera. I dont have a D850 so i dont know which one works on it sorry buddy.

@pmthomas3

4 жыл бұрын

Thank you for your response. I received a response from Zhiyun and the cable they suggested doesn't come with the Crane 3 Lab, but is a cable in the Crane 2. However, they did provide a picture, which should help me. Once I get the Nikon D850 configured with the Crane 3 Lab, I'll post back with an update.

@VioletHenning

4 жыл бұрын

Thanks so much, that will be a great help for all D850 users. 👌👌

@pmthomas3

4 жыл бұрын

I am happy to report that the Nikon D850 works just fine on the Crane 3 Lab! The Crane 3 Lab comes with a HDMI Mini to HDMI Mini and a USB 3.0 (Micro-A two part plug) to USB Micro cable. The HDMI Mini to HDMI Mini will work for the data connector, and the USB 3.0 to USB Micro will work for the Camera Control. Use the USB 3.0 connector in the Camera Control's USB 3.0 port, and the cable's USB Micro connector in the Nikon D850's USB Micro portion of the USB 3.0's two part port.

@VioletHenning

4 жыл бұрын

Awesome Mike i am so happy it does. I have the D750 and it doesnt. I just have to operate manually.

Is there one for a phone u would recommend?

@VioletHenning

5 жыл бұрын

Depending on your budget, i definately recommend the huawei P30. Or Samsung S10.

@VioletHenning

5 жыл бұрын

Sorry yes i see now what you asked. So sorry. For a phone you can use the zhiyun tech smooth 4.

@timdubya77

5 жыл бұрын

Haha. I was just gonna go with it. :).

@timdubya77

5 жыл бұрын

Thanks!!!!

@VioletHenning

5 жыл бұрын

Hahaha sorry buddy

Biggest fraud of company, I bought this camera to notice that it has very little camera support. Later I upgraded to Canon Eos R5 and find out that the camera is not supported. Ans when contacting the support they have informed me to buy new model. So basically they ask you to buy new crane everytime you change your camera body, instead of upgrading the firmware. Avoid this company for lack of future upgrades

@VioletHenning

2 жыл бұрын

Hey Victor i feel your pain. To use the full capacity of this gimbal you need to have one of the cameras on its support system. They have spec sheets and support sheets on their website to see which cameras work fully on the gimbal. I have a D750 Nikon and can also only use the gimbal to stabilize my video but cannot connect the camera for all the functions. I would have made 100's of videos about it if my camera worked as it should.