Aufero Laser 2 - Important to know
Ғылым және технология
The new Ortur Aufero Laser 2 from if finally here!
It's a versital diode laser frame with a 390 x 390 mm work area. You can choose between three different diode laser module:
- LU2-2 Laser module with optical output of 1,000-1,600mw
- LU2-4-SF Laser module (short focus) with optical output of 4,500 - 5,500 mw
- LU2-4-LF Laser module (long focus) with optical output of 4,500 - 5,500 mw
The LU2-4-LF Laser module with air assist is what you want to use when cutting but the LU2-4-SF is a good all-arounder laser.
Check out the laser (affiliate link):
s.zbanx.com/r/UIJHKEwKsb7p
(1st-3rd orders get a Free YRR 2.0 worth $89.99 4th-6th get a Free Z-axis worth $69.99 everyday)
We are going to try cutting 3mm and 4mm plywood and 3mm acrylic and some other materials to see how it perfomes. We are also going to engrave glass, leater and wood.
There are one tings that are important to know about the Aufero Laser 2, and that is that there are no end stops. But, with just working with "Current Location" in Lightburn that will not be a problem.
00:00 Intro Aufero Laser 2 from Ortur
00:48 Work area and laser options
01:55 Important to know #1
03:00 Engraving speeds (5000, 10000 and 15000 mm per minute)
03:25 Engraving glass
03:37 Engraving wood and leater
04:01 Cutting project with laser
04:20 Cutting Plywood
05:36 Cutting Acrylics
07:00 Important to know #2
07:45 Review summary
Пікірлер: 47
Check out the Ortur Aufero Laser 2 s.zbanx.com/r/UIJHKEwKsb7p (affiliate link - help support the channel)
Good review, thanks! However I have to disagree on one point. This machine *can in fact be used in absolute coordinates* with a grid on the spoil board. Like any other laser with no limit switches, you simply manually move the laser module to the 0/0 position before turning it on. Then in Lightburn, on the Move tab, click Manage next to Saved Positions, and create a new position and call it 'Home' with the coordinates of 0/0. Then anytime you want to home the machine, just pull down the drop down menu and select Home. While you're on the Move tab, in Move to Position, set X to 200 and Y to 385 and click Go. Now click on Set Finish Position and when your job finishes, the module will move to the finish position, out of the way, so you can retrieve your work. I work in absolute coordinates so I can use my spoil board grid to position my work without the need for framing.
@DIYTECHBROS
2 жыл бұрын
Hi! Love your channel! Yes, we should have specified that there options to overcome this. We were more referring to that, we at least, find it easier to repeat a cut after the laser has been physically moved if the laser has auto homing. Thank you for your feedback! We fully agree with you. Keep up making super useful videos 🤠
@TheLouisianaHobbyGuy
2 жыл бұрын
@@DIYTECHBROS Thanks, I enjoy your channel as well! 👍
@TheLouisianaHobbyGuy
2 жыл бұрын
@@DIYTECHBROS Did you get a different machine? The Aufero Laser 2 I got is 400x400.
@DIYTECHBROS
2 жыл бұрын
We have not tried to push it beyond the official “ortur tech” limitations: ortur.tech/auferolaser2/
thank you. looks like i found my new hobby!!!!
Great video! Question for ya, if I want to engrave highly polished aluminum would that cause any problems? It's basically like a mirror. Thank you!
@DIYTECHBROS
Жыл бұрын
Then you need IR or fiber :-)
What is the best setting for glass engraving?
Can this do multiple items at the same time or must you only do one at a time? Thinking about missing that homing feature, and if it would matter for that purpose.
@DIYTECHBROS
2 жыл бұрын
It returns to origin after each run, so you can do one, replace it, and do the next one. This is actually more accurate than homing :-) the homing switches are not 100% anyways.
Can you switch out the lasers on the same unit?
How would one of these do to cut cardboard? Would it just start it on fire?
Can you guys post the code for your parking sensor?
Good overview, but absence of end-stops is a dealbreaker to me. In my eyes such a fundamental thingie I am surprised they omitted it.
@DIYTECHBROS
2 жыл бұрын
If you use a camera in lightburn, and you need all positions to be absolute, I very much agree. But we almost never use absolute positions. If looking on other machines, make sure either both sides of the axis (usually the y-axis) are synced or they both have end stops.
I assembled my laser and turned it on using lightburn and when it homed it went to left front and kept acting like it wanted to keep going making a grinding noise. My question is how do I set my home point away from the frame?
@DIYTECHBROS
2 жыл бұрын
In setup, for the laser, you choose home point, the four circles.
@DIYTECHBROS
2 жыл бұрын
kzread.info/dash/bejne/nJx7qceSqKbJe9o.html See at 1:34
Damn I didn't realise the laser didn't like white materials. I'm wanting to cut white PVC. Am I totally out of luck or is there any way around it? Could colouring the surface with, say a black marker work for thin material?
@DIYTECHBROS
2 жыл бұрын
Yes, with a marker you can even engrave glass. So, as long as it is thin enough you can cut it. Play around with power and speed as well!
@stancooper5436
2 жыл бұрын
@@DIYTECHBROS Thanks for the reply TECH BROS. Much appreciated! 👍
How does this compare to the Ortur Laser Master 2 Pro?
@DIYTECHBROS
2 жыл бұрын
Hi! The laser modules are the same for both machines. In general, the Master 2 Pro and the Aufero Laser 2 accomplish the things. You have a few % bigger work area, endstops and some extra safety features on the Maser 2 Pro. The Aufero Laser 2 is a very good and solid machine - so on a personal level I would choose that one.
I am keen to know if it will cut aluminium? I want to cut 1.2mm for fishing lure bibs but can’t get a clear answer
@DIYTECHBROS
2 жыл бұрын
Sorry to say the, answer is a very clear no. It can absolutely not cut aluminum. Not even aluminum foil. You need high power lasers to cut aluminum. Remember that laser is heat, and aluminum is excellent at spreading the heat.
@DIYTECHBROS
2 жыл бұрын
But have a look at our 3018 CNC video :-)
@paullobwein1632
2 жыл бұрын
@@DIYTECHBROS ok thank you
Can this engrave on steel tumblers?
@DIYTECHBROS
2 жыл бұрын
Yes, stainless steel is no problem :-)
Can it also cut 6mm plywood
@DIYTECHBROS
2 жыл бұрын
Yes, but then you should choose the LU2-4 LF (Long Focus) laser 😀
CAN I CUT FABRICS LIKE DENIM TSHIRT ETC?
@DIYTECHBROS
Жыл бұрын
I would then recommend to go for more power and air assist, like the Ortur Laser Master 3
@rightlydividetheword
Жыл бұрын
@@DIYTECHBROS really its good for fabric and wont leave burns??? Cuts fast?
@DIYTECHBROS
Жыл бұрын
Hi! Just posted a Short video about this: kzread.infoT0KHpfhGHo8?feature=share
Hi! I wanted to order one like that but i want to know what kind of materials i can engrave with it.
@DIYTECHBROS
2 жыл бұрын
Hi John! You can engrave tons of stuff!! Metals and hard stuff like that is a problem though. But, you can remove paint with it, so painted metal surfaces is possible!
@johngabriel2850
2 жыл бұрын
@@DIYTECHBROS thank you! I forgot to ask you even with the LU2-4-SF i can also engrave glass thing like that? Im very interested but i want to make sure i choose the right machine
@DIYTECHBROS
2 жыл бұрын
Yes, we are engraving glass with the LU2-4-SF. It's a very good allrounder laser module.
that laser cant cut plywood of 4mm... I try with 100% power, speed 100 and 7x times and nothyng... Cant cut! I have same!
@DIYTECHBROS
Жыл бұрын
Two questions: 1.) at what depth are you setting your focus? Make sure to set it 2mm lower for 4mm cutting. 2.) what kind and grade of ply are you using? Note that twig knots, glue and wood type will influence performance!
@deniselimovic7530
4 ай бұрын
i have the same problem.