Nice stand.

thats the best infrmativ video about Aufero ! thx..subscribed..wait for more :))

@NEWTechCreative

2 жыл бұрын

Thank you @Andrei Andrei. I appreciate your comment and support 👍

Fantastic video very informative loved the elevating stand idea too as a wood turner burning my logo into the bottom of bowls is what I am planning on doing and the adjustable stand is perfect

@NEWTechCreative

2 жыл бұрын

Thanks for your comment Colin. I appreciate your feedback and likeminded use of the laser machine. I do like the precision of the laser over a branding iron for logo work on timber…. Also less guess work using the laser and ability to repeat if not satisfied with the first pass!

@WoodWizardrybyColin

2 жыл бұрын

@@NEWTechCreative Your Welcome do you have any details for the adjustable stand you made?

@NEWTechCreative

2 жыл бұрын

Thanks for your reply! Yes I have all the files available on my Etsy store. The links in video description will guide you there to my store. You might be interested in the aufero pack that has files for the laser 2 machine as well. Send me an email to newtechcreative@gmail.com if you have any further questions or help! Thank you 😊

So happy to have come across this channel. Interested in doing some leather patch/coaster engraving as well as tumblers. SF best option?

@NEWTechCreative

2 жыл бұрын

Thank you for your kindness Jennerism 😊 the SF is my preferred all rounder module 👍 perfect for engraving and effortlessly cutting through 3mm acrylic and pine ply!! All the best with the laser journey 😁

Can't see a link to the small tool storage? nice review.

@NEWTechCreative

Жыл бұрын

I have it available in my starter pack for the Aufero. If your just after the tool storage send me an email newtechcreative@gmail.com thank you

I really like the mount and rack idea. I was wondering what is the size of the rack? Is there a link to it at Walmart? I did get the starter set. Nice designs. The tool holder sold me to get it. I'm a stickler on keeping the tools handy

@NEWTechCreative

2 жыл бұрын

Thanks Steve 😁 unfortunately I don’t have a link for the rack at Walmart however I’m sure that you would find one anywhere that sells baking products. The rack I have is approx 200mm * 300mm. I’m toying with another laser bed idea at the moment and might release as another video. Thanks for your support Steve 👍

Im new to lasers and im trying to figure out which one to get, your video was very helpful. My main medium that I work with is chipboard, I've use some standard cutting machines but they are too slow and I thinking a laser would be a better option moving forward. Will this laser let me cut chipboard and perhaps one day upscale to some softer woods?...which head would be the best?...thanks for you feedback

@NEWTechCreative

Жыл бұрын

Thanks for your comment Shae! If your looking at investing in a good cutting laser module I would probably go for the Aufero/Ortur 10W laser module. This module cuts through 4mm pine ply at 200mm/min and is very clean. If that module is out of your price range, the LU2-4SF Module is a really nice all rounder module for engraving and cutting 3mm material however half the speed of the 10w module. I hope this helps 👍👍

hello good day, if you would not mind, can you please show us the settings of the LU2-2 laser module. thank you.

@NEWTechCreative

3 ай бұрын

What settings are you needing?

Hi, how can I get the plans for the Aufero stand and tool box? Thank you!

@NEWTechCreative

Жыл бұрын

Checkout the links below. I have it available on my Etsy account 😁😁

Where is the file for the stand for the laser 1 for the cnc machine. I can't find it.

@NEWTechCreative

11 ай бұрын

Thanks for your comment. It’s on my Etsy store with the Aufero laser 1 pack. I can send separate via email: newtechcreative@gmail.com

How do you home this machine and tell it where the work piece is located? It does not have switches, right? Great video, thanks!

@NEWTechCreative

2 жыл бұрын

Thanks for you comment! Yes this Aufero laser 1 does have limit switches… they are both located in the corner closest to the control board (where you plug it in!) - this is also the ‘front’ of the cutting area. I setup in lightburn but I can’t remember off the top of my head what exact settings I used. I can find out later today if you need? I would have a play with variations of homing settings and have a test file that cuts the letter ‘f’ to check you haven’t accidentally flipped the orientation. If you setup wrong, the letter will come out flipped! If you are referring to the Aufero laser 2 machine… that one does not have limit switches and must disable homing. Thank you 😊

@barefootlyrooted

2 жыл бұрын

@@NEWTechCreative Thanks for the info! I appreciate you offering to check those settings. I think I figured out what I was looking for. I'll comment again if I'm lost :) Thanks!

One question. This can help me for to engrave in metal like silver or gold?

@NEWTechCreative

Жыл бұрын

Great question! Unfortunately no, diode engravers really only remove the layer of anodized paint on metal if it is anodized!! It can also head up some thin metals to change colour such as stainless steel! You would have to buy a very expensive laser to etch/engrave raw metal. Alternatively a small desktop CNC with a v bit would engrave most metals with ease!

If you use the LF laser but only cutting 3mm MDF, do you need to connect it to an air pump?

@NEWTechCreative

2 жыл бұрын

Great question @Alyssa Moleski . I haven’t had a chance to try 3mm MDF, however I think the LF should handle 3mm without air assist no problem. I can try tomorrow if you would like and send results?

@NEWTechCreative

2 жыл бұрын

Hi Alyssa, I have tested 3mm MDF today and it is preferred to use the air assist for cutting. I had a clean cut at 100% power and 2.5mm/sec 1pass. Thank you

i dont currently own a laser however i am interested in getting one...what i want to do is to use a laser to cut a pocket into wood so i can then inlay silver wire into the pocket. can this laser do that..?

@NEWTechCreative

2 жыл бұрын

Great question @squidskunk . The only way to achieve this with a laser cutter is to use thin layers that you can cut through layer by layer then laminate together. I would probably look into a desktop CNC machine for this application!!

Is it possible to get the file for the Tie Frame?

@NEWTechCreative

10 ай бұрын

Thanks for your comment. I have updated in the video description a free download for everyone to use! Let me know if you have issues accessing? Cheers

Do you have a link for your stand design. Looks great!

@NEWTechCreative

2 жыл бұрын

Thanks for your comment Bentley. It is available via the laser starter pack link in the video description! Cheers ☺️

@BentleyRolling

2 жыл бұрын

@@NEWTechCreative okay cool. Wasn’t listed. Thank you! Can you make it w this laser cutter?

@NEWTechCreative

2 жыл бұрын

I assume your referring to the Aufero laser 1 stand? If so, yes absolutely - however you will require a larger laser cutting area than the Aufero laser 1. The dxf is a 2D file that can be used with both laser and milling and any thickness of material. I suppose you could cut out with the Aufero laser 1 section by section if you can figure out how to achieve this!

Files links does not work

@NEWTechCreative

Жыл бұрын

Unfortunately the links have changed. Feel free to visit sinismall or Aufero/Ortur website for further information.

No enclosure not interested

@NEWTechCreative

2 жыл бұрын

This is a good point Evergreen! I’ll pass on the feedback 👍