Audio Input and Output Settings on the R5C - R5C Tip 16
Ғылым және технология
This is the 3rd part in what’s increasingly starting to feel like a never ending series of videos looking at the audio capabilities and settings on the Canon EOS R5C. This time we’ll look at the settings found on pages 2 and 3 of the Audio Setup menu.
These include, the mic attenuator and low cut filter, the settings that control the Canon DM-E1D multi-function shoe mic (attenuation, low cut filter, and directionality), and the monaural microphone. As well as the test tone generator, and output routing.
Finally, we’ll look at how to switch from lossy AAC to uncompressed PCM audio when shooting MP4 format videos.
Previous R5C Audio Videos
⯈ Understanding Inputs and Formats - • Understanding Audio In...
⯈ Setting Your Levels On the R5C - • Setting and Controllin...
══════════════════════
Gear I Use to Make Videos
══════════════════════
(Affiliate links)
⯈ Canon EOS R5 - amzn.to/3uJNNVI
⯈ Canon EOS R5C -
⯈ Anker 747 USB Power Bank for R5C - amzn.to/3i5hIEd
⯈ Canon RF 15-35mm f/2.8L IS USM - amzn.to/37SuLDw
⯈ Canon EF 16-35mm f/4L IS USM - amzn.to/3Oi7YBO
⯈ Canon RF 24-70mm f/2.8L IS USM - amzn.to/3M9I0yQ
⯈ Rode NTG2 -
⯈ Rode Wireless Go -
⯈ Zoom F6 - amzn.to/2TWsSvo
══════════════════════
Chapters
══════════════════════
00:00 Intro
00:33 Audio Menu Orientation
01:27 Audio Setup Page 3 - Input Configuration and Options
02:01 Microphone Settings
02:28 Microphone Attenuator
02:55 Microphone Low Cut Filter
06:16 Multi-fucntion Shoe Mic Settings
06:27 Shoe Mic Attenuator
06:51 Shoe Mic Low Cut Filter
07:22 Shoe Mic Directionality
08:59 Monaural Microphone
10:59 Audio Setup 4
11:12 1KHz Test Tone
12:32 Headphone Volume
14:06 Monitor Channels
15:58 HDMI OUT Channels
16:41 MP4 Audio Format
Пікірлер: 8
I ended up buying the Ninja but I'm having trouble convincing myself to record on it. Until I find the best settings for editing and post workflow. Right now I'm testing out pro res raw and using the mic input on the adamos Ninja v+.
Is there a line input
@PointsInFocus
3 ай бұрын
Unfortunately, no. Ideally, you'll need to use an attenuator cable to bring a line level signal down to mic levels for the camera.
Why are my mic settings turned off? Meaning, I cannot make changes in the settings or are displaying in this video
@PointsInFocus
5 ай бұрын
Do you have an external mic plugged into the mic jack? There are no adjustments for the internal mic (it's auto level only). Unless the camera detects an external mic, it will disable all the level settings on the first 2 pages and most of the settings on the 3rd page of the audio menu. Also the camera disables the audio settings if the currently selected recording mode doesn't support audio; for example, slow and fast motion, frame, or the interval mode.
@nacho710oninstagram2
5 ай бұрын
so I did the firmware update on the camera, and the mic levels work again and now able to record to camera. the only thing as now that the most mic settings are not highlighted so I can make adjustment. hope I'm explaining myself correctly. @@PointsInFocus
@PointsInFocus
5 ай бұрын
It sounds to me like the camera is working correctly. It will only enable the settings that you can change in a given configuration. For example, if you look at the first page of the audio menu, the top settings control whether channels 1 & 2 levels are set separately or as one setting. Depending on how you have that set, you'll either get the two separate sets of controls in the middle of the page, one for each channel, or you'll get the 1 set of controls at the bottom for channel 1/2. You'll never see both enabled at the same time.
@nacho710oninstagram2
5 ай бұрын
I see. I’ll have to keep working with it and learning as I go further. Thanks for your advice and tips. I’ll keep it up 😊