🔴 Watch more ATV repair videos here: kzread.info/head/PLWeQZSOnzi9UKGKUtqewANDeZR1vgyE_9

For anyone watching this after the fact. When I did mine I turned the bike almost up on the opposite side. Didn't have to drain the oil (though an oil change will not hurt); much easier to see and work with things. Hope it helps someone.

A great fix on your ATV. Nice that it's now starting like it should. 👍❤

Great repair walk through! I’ve had starting problems with my eiger 2004 for last 2 years. Spent on two visits to the bike shop to overhaul the carb, didn’t change much. I doubt I could have figured this out if not for your video, and seeing similar issue from a few others. I opened the side cover and voila all the magnets could be slid around in the flywheel, all of them had loosened from the glue. No damage to the stator or pickup sensor windings. I just ordered the new flywheel, gasket and puller kit. Installed it today. This eiger has never run better than now, it’s like new. Only has 2500km

@GettingItDoneNorthOf7

2 жыл бұрын

That's awesome! Sorry I'm just seeing your comment now. Mine is working like a charm as well. Have a great evening 😀

@tyybaben8458

3 ай бұрын

@@GettingItDoneNorthOf7 @stevea4572 Would you recommend starting with the flywheel replacement if you were to do it all over again (vs replacing petcock, overhauling and cleaning carburetor , etc)? I just bought an '06 Eiger and it idles OK but only if warm. No bogging when given gas, per se, that I've noticed. The previous owner had it for 10 years and didn't replace the flywheel and I'm thinking it may be a good preventative move and could help with the rough idle. Thanks much,

Great information Roland. Nice fix too.

@GettingItDoneNorthOf7

3 жыл бұрын

Thanks

this is exactly, we were looking for.

@GettingItDoneNorthOf7

3 жыл бұрын

Glad it helped

Great tutorial, Roland! Glad it finally fixed your issues! You are a jack of all trades, aren't ya? It always amazes me watching these vids. I always have pieces left over 🤣 Haven't "turned wrenches" in a few years, thats Mark's job, lol. I might break a nail 🤣 Might be why we sold our old Polaris, 😆. Great job! Sounds like its running smoothly! Merry Christmas! God Bless!

@GettingItDoneNorthOf7

3 жыл бұрын

I have to be, no way I'm paying someone to fix it lol

@OldmanADV

8 ай бұрын

so much for gender equality

​@GettingItDoneNorthOf7 great video! Can you please help me find the diagram for all the gears and stuff? All mine fell out and i cant find a video or a diagram.

Nice video. I have same 4 wheeler...but mine began to leak little bit of oil while reving engine. I found it from from too of cover like right where the starter/wire ...what would be best for repair...replace gasket or maybe grommet where wires go is tore ?

I will check out your play list Roland

Merry Christmas my friend.

Hi, great video. Can you send a link regarding the diagram to put the washers back on that fall off?

This is a great video. Thank you for sharing my friend. Eva

@GettingItDoneNorthOf7

3 жыл бұрын

Thanks for your support Eva!

Can you publish the assembly diagram?

Great video

@GettingItDoneNorthOf7

2 жыл бұрын

Thanks!

Merry Christmas!

@GettingItDoneNorthOf7

3 жыл бұрын

Merry Christmas 🎅

My Polaris have the same issue.we change the flywheel and now still no power I think I will need to buy the collie

Can u buy the plunger separately

FYI, The flywheel nut size is M16 with a 1.5 thread pitch. My thread protector actually damaged the threads on the crankshaft and I got a thread correction die to fix it. My impact wrench did not break it loose and I tried everything to get it off. Finally got the help of an ATV dealer and his impact gun got it right off.

It's never good when loose parts are bouncing around inside and engine! I have a Kawasaki Bayou that needs much attention. I hope to get to it this spring.

@GettingItDoneNorthOf7

3 жыл бұрын

You got that right! Runs like a dream now.

I got a 2006 Suzuki Eiger 400 4x4 no spark all lights come on new coil good battery good fuses getting good compression and it's getting gas any suggestions?????

What would be the reason for clicking?

Anybody know if this problem effects all years 02-07 Suzuki Eiger or just certain years such as the 04?

Roland my 2004 Eiger 4x4 also does this clunking noise from the front diff area when I’m in 2WD and running 30 mph or so and then let off the throttle. It does this since about 2 years after I bought it new in 2004. Have you come across this issue on yours?

@scottfrye5535

2 жыл бұрын

Tighten the adjust screw on the 4 wd

Where can I buy the plunger

My suzuki Eiger 2004 400 was in the water river and since that, no start :-/ i put new stator and new ignition coil and no spark :-( what the problem please ?

Great video have another comment here also

I watched the video of the eiger with the clutch my 2002 eiger wants to kick into gear when it starts where are those clutch plates located PS i liked the video

My Recoil Gear is seized onto the crank shaft, and I'm unsure what to do. Do you have any suggestions? What I'm talking about is this part on the pull starter at 5:34

Where did you find the diagram? I have mine apart but can't figure out where all the washers go

@GettingItDoneNorthOf7

2 жыл бұрын

I google it. I will try to find it for you.

Nice!

hello in your video the magnets became loose...does the new flywheel incorporate magnets..thanks

@GettingItDoneNorthOf7

3 жыл бұрын

Yes the new flywheel is built with magnet built in. Better design by far.

im looking for that diagram for the woshers for the Eiger 400 side cover . can you help me please. jeff

@tommyorrison9659

2 ай бұрын

Did u ever figure it out. I have stuff laying everywhere

I didn't see the magnets on the new flywheel?

Good morning I have the same problem with my 2004 eiger. Glad to see you solve the problem.Great job!! Can you share with me the parts link that you order for the flywheel?

@GettingItDoneNorthOf7

2 жыл бұрын

Good morning! Here is the link you need. www.ebay.com/itm/223314914968

@dustinvaughn2894

2 жыл бұрын

@@GettingItDoneNorthOf7 Thanks Man

I just had my sons apart now it wont go in gear do you have diagram of where washers and shift are go i put a washer between the engagement gear

@GettingItDoneNorthOf7

2 ай бұрын

Sorry no I dont

Mines having similar issues. Also idles weird and dies unless i choke it a bit

@GettingItDoneNorthOf7

3 жыл бұрын

That's what mine did. This is a common issue with Suzuki and Artic Cat I believe.

we watched you on the big screen when you uploaded.. but didn't comment.. your getting another watch LOL (neat how that works) so this is what you and your dad were doing in the garage when andy rolled in? Roland? i bet your thrilled it's working for the coming snow. These "how to's" are great. Merry Christmas guys🤍🎄

I have a artic cat 400 4x4 is the same engine to suzuki eiger, have a big detail,have a poor spark,i change the high tension bobine, have a new estator,i change cdi unit an regulator and the quad doesn't run

@GettingItDoneNorthOf7

3 жыл бұрын

This issue I had in this video could be your problem.

Wish you had shown putting the rest of it back together. Is there a link for the diagram you found? All the diagrams I've found are segmented and not easy to see where everything goes back together

@ronheidenreich1808

2 жыл бұрын

I would like to see the diagram he used also

@jakedillon6080

5 ай бұрын

Every figure out how to put all the gears back?

@Rob-C

5 ай бұрын

@@jakedillon6080 yes I did! I had found a parts diagram and pieced it back together that way. It runs great now after sitting in the woods for 10 years in pieces.

@jakedillon6080

5 ай бұрын

Do you possibly have a link for the diagram

@Rob-C

5 ай бұрын

@@jakedillon6080 I bought an online manual. It's like 8 bucks. You could try looking through the forums and ask there

Where did you get the diagram? And could you send the link to it?

@GettingItDoneNorthOf7

Жыл бұрын

I don't have it anymore but I searched it on Google until I found it.

During the time you were having these issues.. Did your start button still work or were you having to pull start?

@GettingItDoneNorthOf7

3 жыл бұрын

my start button worked always.

@AcquireJDFDevan

3 жыл бұрын

Ok mine does not. Im going to replace starter first and see if that wrks. Thanks so much for your help and videos!

Hey Buddy I`m back, Merry Christmas to You and family. Wow, lOOk at all those wonderful Subs 5 months later. Very Cool, I have some to load when I get the time. This farm is a work in progress and heating system is down. Cheers Roland and Peace Out

How did you replace the magnets that came off? You forgot that

@GettingItDoneNorthOf7

2 жыл бұрын

The new flywheel I installed has built in magnets. They can't fall out anymore.

I ended up selling my eiger I bought new in 05. Few years ago this happend and the magnets got stuck in the flywheel and stator so the machine felt locked up. Took off the side cover and there was millions of pieces of magnets. Reason i sold it is because the transmission gears fell out and i was scared i wouldn't be able to put them back in correctly. Silly me. Wish I would of fixxed it but I still have my vinson 500 I also bought new in 05

Got one no start but crank ok Every once in a while it kinda back fires but no attempt to run Owner replaced carb but made no difference They said it’s a 500 engine? Not sure what year model Are the 400&500 same flywheel It has ing fire Check valves ok

Is this problem only on the 2004 or all years?

@GettingItDoneNorthOf7

2 жыл бұрын

Not sure, but there are other brands with the same problem such as the Artic Cat. I believe other years had the same issue.

@ronheidenreich1808

2 жыл бұрын

This was a problem for years 2003 to 2007

Just put a rotor in one, it had died years ago and the PO just let it sit.... Much rehab also, tires, brakes, seat cover...

We want one of those for the farm. That is what I lve about You Tube, glue, your kidding me. I hate it when my staider gets rubbed.

What is the big difference between the 400 and 500 ???? They look vastly the same to me

@GettingItDoneNorthOf7

11 ай бұрын

I guess only 100 cc

@philliphall5198

11 ай бұрын

Is the 500 doing the same thing and is it the same flywheel ?? I got one that trying to start but won’t They replaced the carb but it’s same thing

@anthonyk6265

7 ай бұрын

Dif lock on 500

Was your stator ok

@GettingItDoneNorthOf7

Жыл бұрын

Yes it was fine