I have the Atoll-X for the Fuji GFX100s and find that I have to overtighten the baseplate securing screw in order to prevent the assembly twisting when heavy lenses are used. There is no anti-twist plate other than the rubberised pad. It looks as if it would be possible to attach an adjustable anti-twist bar accessory between the baseplate and front of the camera. The slot in the baseplate would allow the mounting of the bar and adjustment. Apart from this the product is excellent.

@silence.corner

Жыл бұрын

Glad to get your positive feedback, I have forwarded your suggestion to the design team, hope we can improve it, what lens do you use on GFX?

Is this arca plate compatible? Or do I need a base mount to attach to my tripod?

@silence.corner

9 ай бұрын

Hello Jeremias ATOLL's feet are Arca-Swiss specifications, and you can install them directly on your Arca-Swiss ball head^^

I have a tetherblock attached to my camera. Can i use this in this setup instead of L bracket?

@silence.corner

2 ай бұрын

Hello Thanks for reaching out^^ If there are additional screw holes on the tetherblock attached Then it will work with ATOLL^^

@mordavian

2 ай бұрын

@@silence.corner Thank you. There are two screw holes at the bottom of tether block.

Is there a way to attach the peak design plate with a longer screw ?

@silence.corner

Жыл бұрын

We tested it and it works in some states, but not all cameras support it drive.google.com/file/d/1fofh9TeApxBU4coabyMqTblD8e8eZRjp/view?usp=sharing drive.google.com/file/d/1-Pwh-OdUGaAhv2P85sUN0UaHoiH_JndY/view?usp=sharing

Hi, I bought model C for my canon R5, I find hand grip space too tight , i should go for X model?

@jwkm6918

10 ай бұрын

Model X works amazingly well for the R5

Hi, I have a Nikon D850, is the mount compatible with the Peak Design Capture V3?

@silence.corner

9 ай бұрын

Sorry, ATOLL X is not compatible with PD Capture V3

Do you suggest atoll x for Nikon z6 or atoll c?

@koenpijpersphotography

Жыл бұрын

Interested in the same question, i think the x is the better one as the table on the website says you will require a base plate.

@silence.corner

Жыл бұрын

Generally speaking, we recommend ATOLL D, you can refer to the difference between C/D on Z series silencecorner.net/pages/atoll-installation-guide#NikonZ Also, the ATOLL can be aligned with the center of the lens without installing the Heightening Plate, you can Disassemble the ATOLL, as shown in this video^^ kzread.info/dash/bejne/n5-oqsahpZXeo9Y.html