I have a tetherblock attached to my camera. Can i use this in this setup instead of L bracket?
@silence.corner2 ай бұрын
Hello Thanks for reaching out^^ If there are additional screw holes on the tetherblock attached Then it will work with ATOLL^^
@mordavian2 ай бұрын
@@silence.corner Thank you. There are two screw holes at the bottom of tether block.
@gl_unofficial6 ай бұрын
And the gimbal ronnin sc or rs2?
@silence.corner6 ай бұрын
Hello ATOLL can work with most gimbals : Sometimes you need to add counterweight on the gimbal for balance, if you want to mount ATOLL on the gimbal, you can refer to these videos of creative photographers to see if it fits your needs. kzread.info/dash/bejne/e4WWxcGihc3cppM.html or check more info here silencecorner.net/pages/atoll-compatible-camera-list
@gl_unofficial6 ай бұрын
Hello Does this works with the 28-75 tamron f2.8 g2
@silence.corner6 ай бұрын
This is the lens you are referring to,"Tamron A063 28-75mm F2.8 Di III VXD G2" Yes, it is compatible with ATOLL S^^ instagram.com/reel/CyRrjbmJbT_/
@jeremias.lindner9 ай бұрын
Is this arca plate compatible? Or do I need a base mount to attach to my tripod?
@silence.corner9 ай бұрын
Hello Jeremias ATOLL's feet are Arca-Swiss specifications, and you can install them directly on your Arca-Swiss ball head^^
@loumuller92669 ай бұрын
hello, i am interested, can I buy it in a shop or only your website ? (I don't live in the us)
Hi, I have a Nikon D850, is the mount compatible with the Peak Design Capture V3?
@silence.corner9 ай бұрын
Sorry, ATOLL X is not compatible with PD Capture V3
@jayeshtopiwala321911 ай бұрын
Hi, I bought model C for my canon R5, I find hand grip space too tight , i should go for X model?
@jwkm691810 ай бұрын
Model X works amazingly well for the R5
@proriyami Жыл бұрын
Hi Daniel, I purchased the ATOLL C for my Nikon Z7 II but the problem is the lens ring and functions buttons got covered, cloud you advise how to solve this problem? thank you
@silence.corner Жыл бұрын
Hello Sulaiman Both C/D are fine, the difference is here silencecorner.net/pages/atoll-installation-guide#NikonZ The body of ATOLL C and ATOLL D is the same. The difference is the length of the quick release plate. ATOLL C has standard quick release plate ATOLL D has extended quick release plate You can find that ATOLL C is close to the camera ATOLL D is far away from the camera You can replace the quick release plate on the ATOLL C with an extended quick release plate and it will become an ATOLL D^^ silencecorner.net/products/extended-plate-1
@robertparsons558 Жыл бұрын
I have the Atoll-X for the Fuji GFX100s and find that I have to overtighten the baseplate securing screw in order to prevent the assembly twisting when heavy lenses are used. There is no anti-twist plate other than the rubberised pad. It looks as if it would be possible to attach an adjustable anti-twist bar accessory between the baseplate and front of the camera. The slot in the baseplate would allow the mounting of the bar and adjustment. Apart from this the product is excellent.
@silence.corner Жыл бұрын
Glad to get your positive feedback, I have forwarded your suggestion to the design team, hope we can improve it, what lens do you use on GFX?
@dimitriosamarantidis8920 Жыл бұрын
Do you suggest atoll x for Nikon z6 or atoll c?
@koenpijpersphotography Жыл бұрын
Interested in the same question, i think the x is the better one as the table on the website says you will require a base plate.
@silence.corner Жыл бұрын
Generally speaking, we recommend ATOLL D, you can refer to the difference between C/D on Z series silencecorner.net/pages/atoll-installation-guide#NikonZ Also, the ATOLL can be aligned with the center of the lens without installing the Heightening Plate, you can Disassemble the ATOLL, as shown in this video^^ kzread.info/dash/bejne/n5-oqsahpZXeo9Y.html
@kenshady007 Жыл бұрын
Does this product work for the sigma 56mm f1.4 dc dn?
@silence.corner Жыл бұрын
Hello,yes it is^^
@kenshady007 Жыл бұрын
@silence.corner where can I find/purchase it?
@silence.corner Жыл бұрын
@@kenshady007 You can check it here, thanks^^ silencecorner.net/collections/atoll-series
@kenshady007 Жыл бұрын
@@silence.corner Thanks for the link, but unfortunately, it is not compatible with the canon m50 and Sigma 56mm f1.4 combination.
@FerdinandTerreros Жыл бұрын
Is there a way to attach the peak design plate with a longer screw ?
@silence.corner Жыл бұрын
We tested it and it works in some states, but not all cameras support it drive.google.com/file/d/1fofh9TeApxBU4coabyMqTblD8e8eZRjp/view?usp=sharing drive.google.com/file/d/1-Pwh-OdUGaAhv2P85sUN0UaHoiH_JndY/view?usp=sharing
I’d love to keep a camera cage on my a6400 while using this product! Any suggestions?
@silence.corner Жыл бұрын
Soon, we will release cage compatible products at the end of this month^^
@conservovirtus5796 Жыл бұрын
Canon RF 24-70?
@silence.corner Жыл бұрын
Yes~ATOLL C cpmpatible most of RF lens^^ please check here for more info silencecorner.net/pages/atoll-compatible-camera-list
@bentchristensen3770 Жыл бұрын
It cannot come to Denmark fast enough.
@brooker_7883 Жыл бұрын
Does this work with a FTZ adapter?
@silence.corner Жыл бұрын
Yes,it is check more info here^^ silencecorner.net/pages/atoll-compatible-camera-list
@veselinvasilev9362 Жыл бұрын
Thanks!
@johncarter591 Жыл бұрын
Would this cope with the weight of a Sigma 40mm art lens on a Canon 6D ??
@mark1hancock Жыл бұрын
Wish it was compatible with Olympus EM1 -great idea
@silence.corner Жыл бұрын
EM1 Compatible with ATOLL D+Heightening Plate Please check here of more info^^ silencecorner.net/pages/atoll-compatible-camera-list
@mark1hancock Жыл бұрын
@@silence.corner This says Not recommended because of bad experience of grasp. further on it says The finger space between the ATOLL and the grip is too small to hold the camera. So we have removed EM1 and OM1 from the available compatibility list. Can't work for everything I guess.
@silence.corner Жыл бұрын
@@mark1hancock Hello sorry to confuse you Please refer to this video for detailed setup recommendations kzread.info/dash/bejne/fnWVt9p8ocK6o9Y.html
@seikibrian8641 Жыл бұрын
This looks interesting; I wonder if it will fit my little Panasonic GX9. If so, I may get two; one for the GX9 and one for my Canon 6D II.
@silence.corner Жыл бұрын
Hello Yes, GX9 compatible with ATOLL C+Heightening Plate more info please check here^^ silencecorner.net/pages/atoll-compatible-camera-list
@derricksalisbury7631 Жыл бұрын
Does it work with Panasonic G9
@silence.corner Жыл бұрын
Thanks for reaching out Panasonic G9 compatible with ATOLLD+Heichgtening Plate Check compatibility list for more info silencecorner.net/pages/atoll-compatible-camera-list
@sarahgmphotography Жыл бұрын
Hello, does it work with canon rf 28-70 f2 and RF 50mm 1.2?
@TomYnysMon Жыл бұрын
Its a great item, but one problem I have has is when using the RF 70-200 or RF 15-35 lenses, the Atoll has to be located so close to the camera body because of the size of the rear element of the RF lenses that using the remote shutter port on the Canon EOS R5 is just about possible but then the Atoll cannot rotate as the thumbscrew fouls on the shutter release plug.
@byronguerrero7582 Жыл бұрын
does the S work with sony a7siii?
@silence.corner Жыл бұрын
Yes, ATOLL S is compatible with most Sony α series mirrorless cameras^^ (some model need to install Heightening Plate)
@AR-vf7vg Жыл бұрын
I don't need this Atoll
@CartyCantDance Жыл бұрын
Does this work for ZVE10. Or ZVE10 with smallrig cage?
@silence.corner Жыл бұрын
Soon, we will release cage compatible products at the end of this month^^
@holgerhartmann2284 Жыл бұрын
Is the Atoll for every camera?
@silence.corner Жыл бұрын
It has three models, please refer to here silencecorner.net/pages/atoll-compatible-camera-list
@fadlydsp Жыл бұрын
Can you bring this product to indonesian market or e-commerce ? I think many people here as a content creator love this stuff, like me also.
@castleteck9263 Жыл бұрын
I just saw this on another youtubers channel. I definitely need to try one of these for our smart rooms. Also are there any EDU rates. We have roughly 28 smart rooms.
@KeithAng84 Жыл бұрын
Does it work with smallrig cage and metabones from ef to e mount?
@silence.corner Жыл бұрын
Sorry It cannot work with smallrig cage and metabones
@123isaacvee Жыл бұрын
Would this work on a rs3 gimbal?
@silence.corner Жыл бұрын
We haven't tested the RS3, but some photographers do, you can ask them ^^ instagram.com/stories/txcjosh/3030622518408362563/ instagram.com/p/Cnxxsj8J1Ou/
@madiosbeat1201 Жыл бұрын
how mch
@silence.corner Жыл бұрын
Hello maDios It is about 94USD^^ silencecorner.net/collections/atoll-series
Жыл бұрын
Why don't you advertise it on the gimbal? I want to buy for my gimbal
@silence.corner Жыл бұрын
Hello Eymen we haven't tested ATOLL on gimbel yet. But, I think because the ATOLL is far away on the camera, it doesn't balance well on the gimbel
Жыл бұрын
@@silence.corner Thank you😊
@gbee8888 Жыл бұрын
Anyone else getting vertigo looking at the background?
@meronmeron-m3m Жыл бұрын
If you use heavy lens the weigh pressure will still be on the body compared when the collar is on lens the heavy pressure is on lens am I right?
@silence.corner Жыл бұрын
Yes ATOLL is mounted on the camera, not on the lens. It can provide a better balance for the lens weighing less than 1kg. telephoto lens balances better on its own tripod mount collar^^
@officialbabyfacee9720 Жыл бұрын
Can it be used with Sony a7iii in a smallrig cage?
@silence.corner Жыл бұрын
Sorry,It can't work with cage^^
@adrielsalazar3552 Жыл бұрын
Would this work with tilt shift lenses?
@silence.corner Жыл бұрын
Sorry, it can't Thank you^^
@user-fd2do8po7q Жыл бұрын
대단한 실망이다 광고는 하면서 고객들이 쉽게 접근해 살 수도 없게 해놓고...기만당하고 있다는 생각이든다.다른없체에서 같은기능 유사제품 나오면???????
@silence.corner Жыл бұрын
May I ask what happened? you can send us an email, let us provide you with more assistance, [email protected] Thank you^^
@frandollinger2605 Жыл бұрын
I just got mine Easy to install. I have the Canon R5. It works with the 800 F11 which is fantastic. You cant have it on for the 100-500 lens because it interferes with the tripod foot. Thats ok cause its a big benefit to have it for the 800. It also works on the 24-105. Now I don't need an L bracket and the screen can swivel.
@silence.corner Жыл бұрын
Thank you for sharing and happy new year☺
@tonymarsh3541 Жыл бұрын
Fantastic to hear that it works on the RF800mm. But does that mean supporting the lens from the camera, rather than using the fixed lens mount?
@GilbertGardens Жыл бұрын
@@tonymarsh3541 anyone tried on a gimbal ? Not the 800 of course LOL
@kojpetersson Жыл бұрын
Hi Fran, really nice to hear someone who also have an R5, it seams as if there is only Sony users who has tried this mount. I am so much wondering if you've tried other lenses on it and in that case which ones. Also if you have used any of the EF-RF adapter and if there is room for it to use any of those on the R5, I am using the one with a control ring on presently. I am using Canon TSE lenses a lot and I have to use the adapter for them but I shoot a lot vertical/horisontal options so this would be gold for me.
@user-fd2do8po7q Жыл бұрын
수요가 많을듯 한데 왜 이런방식으로 구매루트를 운영하는지요? 좀더 쉽게 접근해서 쉽게 구매할 수 있도록 해줘야는거 아닌가???????
@silence.corner Жыл бұрын
Sorry, I am not very clear about your question, we can ship to South Korea, we have sent to many South Korean photographers, thank you ^^
@user-fd2do8po7q Жыл бұрын
어데서 어찌 구매할수 있을까요???
@silence.corner Жыл бұрын
You can check it here, thanks^^ silencecorner.net/collections/atoll-series
@user-fd2do8po7q Жыл бұрын
캐논 R24-105에도 장착 가능 할까요???
@silence.corner Жыл бұрын
Yes, ATOLL C is compatible with most Canon RF lenses 😊 drive.google.com/file/d/11aiI5szeL6bGyIZutEpRB0mOJTXL22py/view?usp=share_link
@Boxing_Moe Жыл бұрын
字幕沒有繁中
@silence.corner Жыл бұрын
hi check here^^ kzread.info/dash/bejne/mmmgj6lpeJuokZc.html
@terrylevi9717 Жыл бұрын
I’m might have been interested if it came in black to fit in with my Canon R5
@arunr5529 Жыл бұрын
I use the Pentax 15-30mm (Tamron) and disappointed this doesn't work with a lens of that size, otherwise I'd happily get one.
@paulcore2687 Жыл бұрын
I want to buy!!! Where???
@silence.corner Жыл бұрын
You can pre-order here, thanks^^ silencecorner.net/collections/atoll-series
@paulcore2687 Жыл бұрын
when is this available for sale??
@huruken Жыл бұрын
nice product. Is there a plate that can be attached to the EOS 90D?
@silence.corner Жыл бұрын
Hello thanks for reach out 90D compatible with ATOLL D^^
@huruken Жыл бұрын
@@silence.corner Thank you for reply. I will buy this product;)
Пікірлер
I have a tetherblock attached to my camera. Can i use this in this setup instead of L bracket?
Hello Thanks for reaching out^^ If there are additional screw holes on the tetherblock attached Then it will work with ATOLL^^
@@silence.corner Thank you. There are two screw holes at the bottom of tether block.
And the gimbal ronnin sc or rs2?
Hello ATOLL can work with most gimbals : Sometimes you need to add counterweight on the gimbal for balance, if you want to mount ATOLL on the gimbal, you can refer to these videos of creative photographers to see if it fits your needs. kzread.info/dash/bejne/e4WWxcGihc3cppM.html or check more info here silencecorner.net/pages/atoll-compatible-camera-list
Hello Does this works with the 28-75 tamron f2.8 g2
This is the lens you are referring to,"Tamron A063 28-75mm F2.8 Di III VXD G2" Yes, it is compatible with ATOLL S^^ instagram.com/reel/CyRrjbmJbT_/
Is this arca plate compatible? Or do I need a base mount to attach to my tripod?
Hello Jeremias ATOLL's feet are Arca-Swiss specifications, and you can install them directly on your Arca-Swiss ball head^^
hello, i am interested, can I buy it in a shop or only your website ? (I don't live in the us)
Hello Sure,check here^^ silencecorner.net/collections/atoll-series
Hi, I have a Nikon D850, is the mount compatible with the Peak Design Capture V3?
Sorry, ATOLL X is not compatible with PD Capture V3
Hi, I bought model C for my canon R5, I find hand grip space too tight , i should go for X model?
Model X works amazingly well for the R5
Hi Daniel, I purchased the ATOLL C for my Nikon Z7 II but the problem is the lens ring and functions buttons got covered, cloud you advise how to solve this problem? thank you
Hello Sulaiman Both C/D are fine, the difference is here silencecorner.net/pages/atoll-installation-guide#NikonZ The body of ATOLL C and ATOLL D is the same. The difference is the length of the quick release plate. ATOLL C has standard quick release plate ATOLL D has extended quick release plate You can find that ATOLL C is close to the camera ATOLL D is far away from the camera You can replace the quick release plate on the ATOLL C with an extended quick release plate and it will become an ATOLL D^^ silencecorner.net/products/extended-plate-1
I have the Atoll-X for the Fuji GFX100s and find that I have to overtighten the baseplate securing screw in order to prevent the assembly twisting when heavy lenses are used. There is no anti-twist plate other than the rubberised pad. It looks as if it would be possible to attach an adjustable anti-twist bar accessory between the baseplate and front of the camera. The slot in the baseplate would allow the mounting of the bar and adjustment. Apart from this the product is excellent.
Glad to get your positive feedback, I have forwarded your suggestion to the design team, hope we can improve it, what lens do you use on GFX?
Do you suggest atoll x for Nikon z6 or atoll c?
Interested in the same question, i think the x is the better one as the table on the website says you will require a base plate.
Generally speaking, we recommend ATOLL D, you can refer to the difference between C/D on Z series silencecorner.net/pages/atoll-installation-guide#NikonZ Also, the ATOLL can be aligned with the center of the lens without installing the Heightening Plate, you can Disassemble the ATOLL, as shown in this video^^ kzread.info/dash/bejne/n5-oqsahpZXeo9Y.html
Does this product work for the sigma 56mm f1.4 dc dn?
Hello,yes it is^^
@silence.corner where can I find/purchase it?
@@kenshady007 You can check it here, thanks^^ silencecorner.net/collections/atoll-series
@@silence.corner Thanks for the link, but unfortunately, it is not compatible with the canon m50 and Sigma 56mm f1.4 combination.
Is there a way to attach the peak design plate with a longer screw ?
We tested it and it works in some states, but not all cameras support it drive.google.com/file/d/1fofh9TeApxBU4coabyMqTblD8e8eZRjp/view?usp=sharing drive.google.com/file/d/1-Pwh-OdUGaAhv2P85sUN0UaHoiH_JndY/view?usp=sharing
What tripod are you using in the video?
Gitzo Légende^^ www.gitzo.com/global/gitzo-legende-traveler-tripod-kit-gk1545t-rti/
I’d love to keep a camera cage on my a6400 while using this product! Any suggestions?
Soon, we will release cage compatible products at the end of this month^^
Canon RF 24-70?
Yes~ATOLL C cpmpatible most of RF lens^^ please check here for more info silencecorner.net/pages/atoll-compatible-camera-list
It cannot come to Denmark fast enough.
Does this work with a FTZ adapter?
Yes,it is check more info here^^ silencecorner.net/pages/atoll-compatible-camera-list
Thanks!
Would this cope with the weight of a Sigma 40mm art lens on a Canon 6D ??
Wish it was compatible with Olympus EM1 -great idea
EM1 Compatible with ATOLL D+Heightening Plate Please check here of more info^^ silencecorner.net/pages/atoll-compatible-camera-list
@@silence.corner This says Not recommended because of bad experience of grasp. further on it says The finger space between the ATOLL and the grip is too small to hold the camera. So we have removed EM1 and OM1 from the available compatibility list. Can't work for everything I guess.
@@mark1hancock Hello sorry to confuse you Please refer to this video for detailed setup recommendations kzread.info/dash/bejne/fnWVt9p8ocK6o9Y.html
This looks interesting; I wonder if it will fit my little Panasonic GX9. If so, I may get two; one for the GX9 and one for my Canon 6D II.
Hello Yes, GX9 compatible with ATOLL C+Heightening Plate more info please check here^^ silencecorner.net/pages/atoll-compatible-camera-list
Does it work with Panasonic G9
Thanks for reaching out Panasonic G9 compatible with ATOLLD+Heichgtening Plate Check compatibility list for more info silencecorner.net/pages/atoll-compatible-camera-list
Hello, does it work with canon rf 28-70 f2 and RF 50mm 1.2?
Its a great item, but one problem I have has is when using the RF 70-200 or RF 15-35 lenses, the Atoll has to be located so close to the camera body because of the size of the rear element of the RF lenses that using the remote shutter port on the Canon EOS R5 is just about possible but then the Atoll cannot rotate as the thumbscrew fouls on the shutter release plug.
does the S work with sony a7siii?
Yes, ATOLL S is compatible with most Sony α series mirrorless cameras^^ (some model need to install Heightening Plate)
I don't need this Atoll
Does this work for ZVE10. Or ZVE10 with smallrig cage?
Soon, we will release cage compatible products at the end of this month^^
Is the Atoll for every camera?
It has three models, please refer to here silencecorner.net/pages/atoll-compatible-camera-list
Can you bring this product to indonesian market or e-commerce ? I think many people here as a content creator love this stuff, like me also.
I just saw this on another youtubers channel. I definitely need to try one of these for our smart rooms. Also are there any EDU rates. We have roughly 28 smart rooms.
Does it work with smallrig cage and metabones from ef to e mount?
Sorry It cannot work with smallrig cage and metabones
Would this work on a rs3 gimbal?
We haven't tested the RS3, but some photographers do, you can ask them ^^ instagram.com/stories/txcjosh/3030622518408362563/ instagram.com/p/Cnxxsj8J1Ou/
how mch
Hello maDios It is about 94USD^^ silencecorner.net/collections/atoll-series
Why don't you advertise it on the gimbal? I want to buy for my gimbal
Hello Eymen we haven't tested ATOLL on gimbel yet. But, I think because the ATOLL is far away on the camera, it doesn't balance well on the gimbel
@@silence.corner Thank you😊
Anyone else getting vertigo looking at the background?
If you use heavy lens the weigh pressure will still be on the body compared when the collar is on lens the heavy pressure is on lens am I right?
Yes ATOLL is mounted on the camera, not on the lens. It can provide a better balance for the lens weighing less than 1kg. telephoto lens balances better on its own tripod mount collar^^
Can it be used with Sony a7iii in a smallrig cage?
Sorry,It can't work with cage^^
Would this work with tilt shift lenses?
Sorry, it can't Thank you^^
대단한 실망이다 광고는 하면서 고객들이 쉽게 접근해 살 수도 없게 해놓고...기만당하고 있다는 생각이든다.다른없체에서 같은기능 유사제품 나오면???????
May I ask what happened? you can send us an email, let us provide you with more assistance, [email protected] Thank you^^
I just got mine Easy to install. I have the Canon R5. It works with the 800 F11 which is fantastic. You cant have it on for the 100-500 lens because it interferes with the tripod foot. Thats ok cause its a big benefit to have it for the 800. It also works on the 24-105. Now I don't need an L bracket and the screen can swivel.
Thank you for sharing and happy new year☺
Fantastic to hear that it works on the RF800mm. But does that mean supporting the lens from the camera, rather than using the fixed lens mount?
@@tonymarsh3541 anyone tried on a gimbal ? Not the 800 of course LOL
Hi Fran, really nice to hear someone who also have an R5, it seams as if there is only Sony users who has tried this mount. I am so much wondering if you've tried other lenses on it and in that case which ones. Also if you have used any of the EF-RF adapter and if there is room for it to use any of those on the R5, I am using the one with a control ring on presently. I am using Canon TSE lenses a lot and I have to use the adapter for them but I shoot a lot vertical/horisontal options so this would be gold for me.
수요가 많을듯 한데 왜 이런방식으로 구매루트를 운영하는지요? 좀더 쉽게 접근해서 쉽게 구매할 수 있도록 해줘야는거 아닌가???????
Sorry, I am not very clear about your question, we can ship to South Korea, we have sent to many South Korean photographers, thank you ^^
어데서 어찌 구매할수 있을까요???
You can check it here, thanks^^ silencecorner.net/collections/atoll-series
캐논 R24-105에도 장착 가능 할까요???
Yes, ATOLL C is compatible with most Canon RF lenses 😊 drive.google.com/file/d/11aiI5szeL6bGyIZutEpRB0mOJTXL22py/view?usp=share_link
字幕沒有繁中
hi check here^^ kzread.info/dash/bejne/mmmgj6lpeJuokZc.html
I’m might have been interested if it came in black to fit in with my Canon R5
I use the Pentax 15-30mm (Tamron) and disappointed this doesn't work with a lens of that size, otherwise I'd happily get one.
I want to buy!!! Where???
You can pre-order here, thanks^^ silencecorner.net/collections/atoll-series
when is this available for sale??
nice product. Is there a plate that can be attached to the EOS 90D?
Hello thanks for reach out 90D compatible with ATOLL D^^
@@silence.corner Thank you for reply. I will buy this product;)