Subscribed, I love that you brought your truck home clean. Fellas… bring your truck home clean!!!

Your enthusiasm and joy shines directly through the screen when watching your video! thanks and best wishes from Germany

@bigbristv

5 ай бұрын

Thanks for saying this. It made my day 😊

That thing is nasty quick! Nice session man! Thanks for sharing 🙏

@bigbristv

5 ай бұрын

Thanks for the compliment, I didn't expect 92mph!

Nice run. Good job cleaning it out with cold water. It aint any warmer on Long Island 😂 so I salute you! WD-40 is not so bad for arms and bumpers. I use it on arrma stock arms

@bigbristv

5 ай бұрын

Thanks! Regular WD40 is good for some things but the silicone version I can use everywhere. Just have to also oil bearings (I use Liberty synthetic) bc that WD40 Silicone dries up fast.

Make sure you blow air through your truck so it can get rid of all the water or else you will start to see rust all over your metal hardware and bearings.

@bigbristv

Ай бұрын

Now you tell me 🙄😂 Yup, already seeing rust, but what concerned me is when I recently changed out the broken bellcrank and saw rust inside my front diff 😶 Just ordered some diff fluid and should be servicing both front and rear real soon 😉

@JA-ho2kb

Ай бұрын

@@bigbristv they are not 100% sealed shut, reason why I don’t like spraying to much water near there. I had other cars get rusted because of that. If you don’t have access to compressed air, get an inflatable mattress air pump with the small fittings and use that to help blow out any water from tight places, it works great!

@bigbristv

Ай бұрын

@JA-ho2kb thanks for the tips bro!

Where exactly do you plug that light bar in? I’m looking on the inside of my truck and don’t see where the channel is….

@bigbristv

2 ай бұрын

It's plugged into the receiver. You can also use a Y connector from the motor fan or esc. Does your light bar have a BEC connector or JST style connector?

Great video. What motor are you running?

@bigbristv

3 ай бұрын

Thanks! It's the Spektrum 4072 2050kv, same as the Mojave 6s.

@captainoneil1

3 ай бұрын

Did u use stock esc with the 6s battery?

@bigbristv

3 ай бұрын

@captainoneil1 I used a 6s (150a) esc with the 6s battery. 6s won't work with the stock esc.

Nice video, what pinion are you running with that setup? Thanks

@bigbristv

2 ай бұрын

Thanks! I run the stock 16t. Experimented with 18 & 20, but 16 is the sweet spot. That's what the 6s runs and so that's what we run 😄

@CA-RC

2 ай бұрын

Performs really well I think I need to do this conversion. I find mine pretty slow stock but could just be the cause of my infraction 😅. What sort of speeds do you think your hitting with that setup now?

@bigbristv

2 ай бұрын

I'm getting in the upper 50s with the Mojave but it's not about the top speed for me, this thing's quick off the line. Make sure you check all of the bearings, I've had some go bad which will slow you down a lot.

@CA-RC

2 ай бұрын

​@@bigbristv Sounds good, I do agree it's not top speed with this truck I love the handling on loose dirt I was just curious about the top speed definitely sounds good. Keep up the work 💪🏾. Thanks for fast response

@bigbristv

2 ай бұрын

@CA-RC no prob, bro. It's the only rig I have that I wouldn't even think about selling.

Tooooo many treeeeees

@bigbristv

Ай бұрын

😂