Armory Craft Sig Sauer P365 trigger installation video
Спорт
Armory Craft Sig Sauer P365 trigger installation video. Here’s the link if your safety lever or slide catch lever fell out.
Sig Sauer P365 safety lever and slide catch install video • Sig Sauer P365 safety ...
Пікірлер: 654
I feel like you’re talking directly to me when you say “Do not get agitated, Do not force things”! Thank you for that Sir!
@SigGuy
Жыл бұрын
I was! 😏
@MrJeronlewis
5 ай бұрын
If you don't get agitated, you're not a gunsmith.
I'm just going to say, I was hesitant on installing this, then I watched this video and it took me less than 5 minutes to do. ZERO issues. Thanks for this video!
@bkeaver644
Жыл бұрын
now to get up the courage for the spring kit :)
I develop technical manuals for various military platform maintenance instructions. I am extremely impressed with your methodical and steady approach, which yields ease of understanding and clearly explained steps. The end result is the successful replacement of the Sig Sauer P365 original stock trigger with the Armory Craft flat trigger. I appreciate your calm approach in which I successfully replaced the trigger following your instructions the first time and all parts re-installed the first time with no issues as well. I think your recommendation to watch the video all the way through before attempting to perform the procedure is excellent advice. I watched the video twice and when I performed the procedure while listening a third time, I felt as if I had already replaced the trigger, so nothing felt foreign because your video instructions are so clear and easy to follow. In addition to this video, I combined it with the manual safety installation to ensure I included the correct steps for removing the safety to gain access to the pin to be able to remove the take down lever safety bar. Combining the two procedures enabled me to successfully replace the trigger with no issues. Excellent job! Thanks for taking the time to support gun enthusiasts to work on their own firearms with the assistance of a licensed gunsmith.
This was an EXCELLENT tutorial on replacing the trigger and spring assembly/ First rate. Followed it step by step and it was a breeze.
Excellent video, very well detailed. I’ve done three trigger changes now. And they’ve all been super easy thanks to this video.
Outstanding job. I’m usually not the guy looking up help. Thank You.
Your videos are hands down the best on the internet. Hands down. And on top of that, anytime I’ve bought anything from your website it has arrived super quickly with no problems at all. You’re doing the world a great service here, Sig Guy. Thank you.
@SigGuy
7 ай бұрын
Thank you very much for the great feedback and compliment. I really appreciate your support sir.
I did this swap in 20 minutes. Your step by step walk through is perfect. Cheers!
Thank you! I didn’t think I was ever going to get my P365 back together. This is so much better than another video that just tells you to tap the trigger bar and it will fall into place. Impossible!
Thank you for making the upgrade possible through your awesome tutorial. I installed my flat trigger today thanks to your help.
Still needed to view this again this morning installing the new AC trigger on my P365XL....Thank you again sir.
A masterpiece, well explained and very much appreciated. Thank you Sir!
Just wanted to thank you for the tutorial. Flat trigger installed and I couldn't be happier.
@SigGuy
4 жыл бұрын
S C™ awesome. Good job bud. I appreciate the positive feedback also thank you!
@yahooblowsme4598
3 жыл бұрын
@@SigGuy , hey SSG you never really replied but I asked once about shortening the trigger creep and raising the trigger pound to ensure safety. I've looked at my P365 FCU and figured if I just shave a little off the sear where the striker face rest or maybe a very small shave on both the sear and trigger face would shorten the creep. Then I would buy a heavy trigger spring to raise the trigger pull from +5 to hopefully 8 pound pull. What are your thoughts?
@SigGuy
3 жыл бұрын
Yahooblows me personally I modify my EDC pistols very little. I tried a companies spring kit and I had nothing but feed, extract and light primer strikes. Took it out immediately. Risk is not worth the reward (which with the 365 there is none because there is very little you can do with the action.
@yahooblowsme4598
3 жыл бұрын
@@SigGuy ,ok. I'll wait it out, I think sooner or later some company will make a shorter trigger for the P365 eventually since it's so popular.
@SHREDbro
3 жыл бұрын
@@yahooblowsme4598 The Sig Armorer does an action job for the 365 that will take care of what you are looking for.
Great video! I used it to install the flat trigger from Sig, now to the range!!
Fantastic, in-depth video and explanation. As you said, it's always a great idea to take pictures as you go, it really helps and takes the guess work out of the task
*Sig Sauer Guy* I found if I took a skinny panhead screw driver and ground an 1/8 Notch in the blade . It makes taking out and re-installing the trigger spring a 2 second job : Just sharing
Thanks for producing this video. It walked me right through the installation of the Sig OEM flat trigger yesterday. Very pleased with the feel of it. As you stated, the last step was the hardest by far. Overall, not a bad side project and saved me the $50 of having a gunsmith do it. Again, thanks!
@SigGuy
4 жыл бұрын
Ryan Cook excellent feedback and congrats! Haven’t heard from one person that wasn’t able to complete this install. Very satisfying when you can do it yourself! Nice work bud.
Your video was very helpful for my first 365 trigger swap. As others mentioned, I especially appreciated your mention of the takedown bar retaining pin coming in two different colors. Thank you.
I love this guy! Got my slightly curved Armory Craft Trigger in with a breeze. You just can't get any more detailed and clearer than this tutorial.
Great video, much appreciate it. I'd say this job is medium plus difficulty of a 7 out of 10, this video made it doable for a medium skill guy with proper tools.
This helped me over a year ago, and it helped again today. Thank you for putting this together.
Awesome video! Took me about 40 minutes, including cleaning and greasing, to install the slightly-curved AC trigger.
Tremendous instructional video paying attention to details and anticipating problems. Thank you!
OMG...you are a life saver. I added a manual safety to my Sig P365 XL (so wife can use) but had issues with the slide lock bar & slide lock. This video helped out so much to get them back in with ease. You gotta a new subscriber.
Just got my trigger and shirt today, thank you for this video. Fastest 23 minutes and 21 seconds ever.
Thanks for the video! Watched it once all the way through to get an idea of the steps, then a second time while installing my oem Sig flat trigger. I got lucky...everything fell back into place on the first try.
Fantastic video. Seriously, provided great step by step info with necessary details and close ups while explaining the “Don’ts” thanks!
Great video! Just helped me install the Sig factory flat trigger. Saved me $50.00 the gunsmith wanted to charge me to do it. Thanks again!
Thanks for doing this, it's going to make my installation much easier, once my trigger gets here...
You made this project easier than I expected. Love the new look. Thank you from Seattle
@SigGuy
5 жыл бұрын
Pistolpeter 1911 awesome!! Thank you very much for the compliment!
Great tutorial. I was very hesitant installing a Sig 365 flat trigger. I watched this video 5 times prior to attempting trigger replacement. Took me less than an hour with fingers "crossed". IMHO this is the best video. I did other watch replacement trigger installs but again the step by step process was easy to follow. The close up installation detail photos were terrific thus my trigger Sig flat trigger install was successful!
Thank you. Just worked on my first ever gun and your instructions were amazing. I did eff up the safety lever but I watched your other video and was able to get it all back in. A lot easier than I initially thought.
@SigGuy
2 жыл бұрын
Nice work bud!!!! WINNING! 🤙🏼
Thanks again. I used this when I put my AC trigger in last year and my granddaughter and I just put the AC trigger in her new 365XL today, thanks to this video.
@SigGuy
2 жыл бұрын
Excellent! Next time have your granddaughter do it for you. I bet she can! Nice work bud.
@RidersRange
2 жыл бұрын
@@SigGuy she did it all except the spring. She struggled with that using the needle-nose pliers and the pick, so I did that one step. She kept pausing the video to make sure she was doing each step correctly. My granddaughter, like my daughter, wants to know how things work and they don't mind getting their hands dirty.
Many, many, many huge thanks for you doing this and the companion video on the slide catch lever...I could not have accomplished this without your video. Thanks again.
@SigGuy
4 жыл бұрын
Mel and Julie Miller anytime my friend. Thanks for the kind words. Congrats!!
Just installed my Armory Craft trigger with the help of your video. Great step by step instructions! Thank you!
@SigGuy
4 жыл бұрын
Jeff Napalan awesome. Great follow up post!! Thank you for sharing! 🤙🏼
Great video. It saved me from having to send my gun to a gunsmith for reassembling it. The ety lever and slide catch install video also comes very handy. Thanks!
This video was perfect! Great advice to watch all the way through and to be patient instead of forcing it 👏🏾
Thank you for the great tutorial. I watched it twice and swapped out my trigger in less than ten minutes.
@SigGuy
5 жыл бұрын
Hardy Swinson another success! That’s awesome. If you are in the discussion only 365 group on FB post them pics!
Thanks for the video! Took a bit of a shortcut on my 365xl MS because I couldn’t do it exactly the way you did since the safety was in the way for one of the steps but the video still kept me on track! Many thanks. 🇺🇸🇺🇸🇺🇸
@SigGuy
2 жыл бұрын
I wish I had the safety conversion kit at the making of this video. It literally takes 10 seconds to take off the manual safety assembly. It would’ve helped so many people.
Sig Sauer Guy has done an excellent & professional job putting together this install video. The P365 trigger upgrade is very intimidating for me to attempt. Thank you very much for your fine work.
@SigGuy
4 жыл бұрын
Thank you very much sir for the kind words! I really appreciate it.
Got my e-mail today 6-8-2019 that my trigger has been shipped, I ordered it after watching your video 4-13-2019, such a high demand for their trigger and Armory Craft kept me updated the whole time.
@SigGuy
5 жыл бұрын
Larry Baker awesome!!! Can’t wait to see it installed!
Very through well spoken video. Took the worry out of me taking mine down. Thanks!
Exceptional video. Ordered mine about an hour ago. Thanks very much. Will be watching this again while installing it. Very good tutorial.
Thank you, had a fast and easy install because of this video.
Followed this video step by step just as it is presented made for an easy install. As you said, it should be watched through fully before attempting. Do that and it can be done in almost the same time as the video. Also, as you emphasize, don’t get frustrated when things don’t just drop into place. Thanks again for making easy work of what people fear doing. PS Found a great medical KZread showing open hear surgery. Gonna watch it at least 3 times first to be on the safe side before I give it a try. Kidding aside, thanks again for a job well done.
Being a Sig fan, your videos have helped me with my P320's and now tge P365. Very detailed and easy to follow tutorials.
@SigGuy
3 жыл бұрын
Perfect! Thank you very much for the compliment. Reward is when others can do it on their own. 🤙🏼
Appreciate the video, just fished the install and all went smoothly thanks to your in depth directions. Thanks
@SigGuy
5 жыл бұрын
Randy Sap good to hear. Thank you for the compliment sir.
Absolutely great job creating this video. Very thorough. Thank you!
ABSOLUTELY FANTASTIC VIDEO. Excellent quality. Patient and detailed explanations. This made it super easy for me to install my AC P365 flat trigger. Thank You!!!
@SigGuy
5 жыл бұрын
Awesome. So good to hear all the success stories. Thank you for the great compliment sir. Appreciate it very much.
Arrived an hour or so ago and installed!! Thank you for the video, VERY helpful! Well Done!!
@SigGuy
5 жыл бұрын
Jeff Wrede awesome!!!! Thanks for the compliment Jeff. Loooove that trigger!
This is the best installation video on KZread for this trigger. Very well done
@SigGuy
4 жыл бұрын
Steve Brown haha. Thanks brother. Really appreciate the compliment!!!
Awesome video tutorial. It encouraged me to order a flat trigger from Sig for my soon to arrive P365. Thank you Sir!
@edwardaviles7828
4 жыл бұрын
Oh, and I almost forgot. I also ordered a P365 cleaning mat as well. :)
Today I followed this guide step-by-step to install a new trigger and it went perfectly, thanks!
Great video!!! Thanks for the step-by-step procedure and explanations. Like what you said, 'make sure you have a lot of patience if the parts don't match up instantly'. I have to do the installation of take down lever about five times :)
@SigGuy
4 жыл бұрын
Renato Felias but you were successful! I’m willing to bet next time is a lot smoother for you. Nice work sir!
Thanks for this. Just completed it and admittedly a bit more technical than I originally thought it would be. Had to check the other vid too since slide catch fell out. Cheers!
@SigGuy
4 жыл бұрын
Chase Mullins congrats bud! Nice work!!!
Ok this is one of the best tutorials I’ve seen on KZread. You must know me. He reinforced the idea of not letting it get you frustrated. Thanks
With this instruction video I had no trouble installing a GG flat trigger. Very satisfying to do it on my own!!! To the range this week😃
@SigGuy
5 жыл бұрын
Thomas Geisler that is good to hear. So much more satisfaction when you do it yourself. Good job. Have fun!!
Thanks for tutorial! I was able to follow this video and finished the installation without any issues. Great job! Easier than I thought. I do have the manual safety. For those with manual safety, the installation is no difference. Actually make it easier. When you try to loose safety pin without going too far. The safety lever stop you going too far and keep everything in place. Make it easier!!
@Wilders53
4 жыл бұрын
Awesome! Ya I was wondering about that. My trigger in on it's way!! 🤘
just installed my Armory Craft Sig Sauer flat trigger. Could not have done this without your video. Thanks from Long Island!!
@SigGuy
4 жыл бұрын
Good to hear! I’m glad it was helpful. You deserve all the credit though! 🤙🏼
Excellent video, installation was a breeze, thank you!
I know this is an old video, but I wanted to say thank you brother! That takedown lever bar fell out on my XL and getting it all back together was giving me fits.
Thank you for the tutorial I was able to replace my trigger in 15 min. My gunstore wanted to charge me 80 dollars to do it. Great job THX
This helped me tremendously! Thanks for making it so clear and concise.
Thanks, I have a flat trigger coming, this will make it much easier installing it..
Great video, man. Watched it twice before installing a red flat AC trigger. Couldn't have gone any smoother. Love the detail of your videos. I also installed a sniper grey and now have a Titanium grey grip module. I have the manual safety but the install of the trigger was basically the same. Thanks for a great video!
@SigGuy
4 жыл бұрын
🙌🏼🙌🏼🙌🏼 Excellent!!!!! Awesome color selection also! My favorite. Well done sir! 👌🏼👍🏼🤙🏼
Thank you this helped tremendously!!! Turned out I thought I had the takedown bar in wrong because the lever wouldn’t move but then after doing it again I realized I needed to push up on the slide catch/release to be able to rotate it. Duh. Still nowhere near as bad as doing a full trigger job and magazine release on an XDS I cursed a lot that day
Wow, now that's a well done instructional video. Thanks so much for doing this.
Thank you Sig Guy! I ordered an Armory Craft trigger for my new P365 X Marco on Thursday and just finished installing it thanks to this video and your Deluxe DARK tool kit!
@theradbrad08__
Жыл бұрын
Hit me👆👆 up on telegram for your reward🎁
Thanks for the tutorial. Completed the install in about 10 minutes with no problems. Can't wait to try it out now.
@SigGuy
4 жыл бұрын
Thank you and nice work brother! 🤙🏼
Good video, I didn’t have any issues installing my new trigger after watching this. If you have some level of mechanical knowledge/dexterity it’s not a challenge at all.
Thanks Sig Guy, very informative, I got my delivery in today and installed perfectly.
Great tutorial! Super easy install. Can't wait to get mu grip module back so I can test everything out!
Found this video in the midst of rage quitting and treating my FCU like I’m 13 and it’s my Xbox controller after losing a heated 1v1 me on rust. Thank you for taking the time to make this video!
Great video. Thanks for explaining the step by step process. I found using the screwdriver you supply in the Dark kit with the notch made the trigger spring removal, and install super easy, since it traps the spring in the v groove. Thank you for selling your tool kits.
@SigGuy
2 жыл бұрын
Well there ya go! Nice idea. Thanks for sharing. I really appreciate the feed back bud and thank you for your support. 🙏🏼
Just installed my 2nd flat trigger. Thanks for the excellent videos!
Very in-depth instructional video which helped me with my flat trigger install on my P365. Much appreciated!
@SigGuy
4 жыл бұрын
Havoc813 never get tired of hearing the success stories. Thank you sir and good job! 🤙🏼
Great, great video and done at the right speed and detail that I could keep up with you. Just did my trigger and couldn’t have done it without you! Thanks!
@SigGuy
4 жыл бұрын
Mission accomplished for me! Thank you for the feedback. So much more rewarding when you can do it yourself isn’t it?! Good job brother.
Patience is a virtue, and I have NONE. Your video is so detailed that my triggger installation was so fluent and smooth that for a second or two I thought I am a PRO. I was laughing at you when your trigger bar spring popped out- yeah I am an Evil. SAS has different take down lever but once again with your video it was easy to figure out the position of the lever. Many Thanks !!!! My Apologizes for laughing.
@SigGuy
4 жыл бұрын
David G. And comments like this my friend are what make it all worth doing. That’s awesome. Congrats pro! 🤙🏼
Great video, helped me install my trigger with ease.
I used a micro flat head screw driver instead when installing the safety bar after several attempts got it on one try following your instructions. Great video. Safety bar was the only difficulty I came across
@SigGuy
4 жыл бұрын
Eddie B agree. It either goes in easily or is a pain in the butt.
This Sig Guy video... still helping people out after three years. Thanks.
@SigGuy
Жыл бұрын
Funny thing is there is a newer better video than this one. Yet this one gets all the love. Lol. Thanks for watching bud.
Thank you so much, i was able to replace my original p365 trigger to install a flat nickel trigger with the help of your video.
Thank you for doing this video spot on I managed to install my trigger in about 10 minutes or so after watching this video a couple of times it was extremely helpful
@SigGuy
3 жыл бұрын
Thank you for the excellent comment. I really appreciate it. Nice work bud.
Yup Dude...Your a Rock star!!!!Installed my new trigger 1st shot while watching and pausing your video.One of the best how to vids I ever seen....Nice job and thanks for taking the time to help...
@SigGuy
4 жыл бұрын
L I Digga haha. And you earn the best comment award! 🤙🏼 haha. Awesome man! Nice work.
Best "how to" video on the install of the flat trigger. Excellent. Thank you for your help
@SigGuy
4 жыл бұрын
Kevin Williams excellent compliment! Thank you sir. I really appreciate that. 👍🏼
Thank you so much for this video. I watched a couple of others that weren't very precise or clear. After watching your video I had the trigger in and my gun back together in about 20 minutes, no problems at all.
@SigGuy
3 жыл бұрын
Awesome! Nice work brother. Thank you for the compliment also! 🙏🏼
This channel is great, I just switched the extended slide release & a curved trigger into my xmacro. Thank you!
@SigGuy
11 ай бұрын
Thank you very much for the compliment and good work out of you! 🤙🏼
Great video. Followed it along and installed a new Sig flat trigger. My pistol has the thumb safety. I found that the safety will not let you pull the two step pin out too far. At the same time the lower step becomes even with the frame, the pin makes contact with the safety lever. Otherwise went exactly as viewed.
Thank you for the great video. It was very easy to follow and I really appreciate your calm delivery of information. Things went smoothly and I now have my new trigger installed.
great video man! literally took me having to rewind 2-3 parts, but got the new trigger installed in under 30. really saved me a lot of head aches! thanks alot mate!
@SigGuy
3 жыл бұрын
Awesome! Thanks for the compliment and congrats. 🤙🏼
Your instructional videos have got to be THE MOST detailed I have ever seen. New sub for sure. THANK YOU! 👍👍
@SigGuy
3 жыл бұрын
Best comment EVER! 😊 Thank you. 🙏🏼
Great step by step video. Appreciate the explanation throughout.
This video is spot on. You made this install easy. Thank you sir!
Oh yeah, I install mines and I went step-by-step on your video, lol, now I just need to get to the range.
Great video. Just ordered a flat trigger for my P365. Thanks.
Great video! I never would have figured it out without it. THANKS ALOT!!
Great video, I have the flat trigger coming in the mail Friday so I will be putting it in, I watch it twice but I will watch it a few more times and when I start on putting it in I will bring this video up and do it step-by-step, thanks.
Wow awsome video! Thank you so much for the detailed information on how to change the trigger.
Just bought a P365 today, I want to change to a flat trigger because I prefer them. This video is going in to the Sig list. Thank you for the excellent video!
@SigGuy
3 жыл бұрын
Thank you very much for the compliment and good luck sir! You’ve got this!
Great video, thanks so much! I just replaced my trigger in about 10 minutes with a 90 degree pick and needle nose pliers. And for those wondering if there is a difference for the version with the manual thumb safety (P365 MS), the job is exactly the same- you just push the silver pin out until it touches the underside of the safety and continue from there.
@SigGuy
4 жыл бұрын
Larry Shreddy good to know bud. Thanks for the update!!
@awl168
4 жыл бұрын
Awesome to know. I was wondering whether I needed to remove the manual safety to replace the trigger. Thanks.
@dylconnaway9976
4 жыл бұрын
Larry Shreddy Thank you!