FOUR Sig P365 Triggers Tested- Science-ish

Ойын-сауық

In this video I compare 4 different triggers for the Sig Sauer P365 Variants.
MCarbo Short Stroke
Tyrant CNC Intellifire
IMT
Stock Sig Flat Trigger

Пікірлер: 45

  • @TonySmithJr
    @TonySmithJrАй бұрын

    "you guys owe me a beer after how many times I changed the triggers out" yes... yes we do. Great work and I agree. p365 trigger is hot garbage and does feel like a double action trigger that just "rolls" until it breaks. My shadow 2 double action is actually smoother and lighter than the p365.

  • @mp7235
    @mp72353 ай бұрын

    Thank you for this video, exactly the info I was looking for!

  • @mrjughead87
    @mrjughead872 ай бұрын

    Thank you for this video. I'm new to Sig, and learning about the trigger and upgrade options was interesting. Also, you do a great job. You have a soothing voice that's worth listening to.

  • @GruntyCaveman

    @GruntyCaveman

    2 ай бұрын

    Hey, Jughead. Thanks for the kind words! I hope you enjoy your new Sig.

  • @ATeamReilly
    @ATeamReilly4 ай бұрын

    Perfect video because I have several m carbo items on my p365 and I was debating whether to install this or not you've made it easy thank you

  • @GruntyCaveman

    @GruntyCaveman

    4 ай бұрын

    Happy pewing. Their installation video is probably the best out there too.

  • @clintonpaul6550
    @clintonpaul655021 күн бұрын

    I'v had the IMT trigger installed for a couple years and it's been great.

  • @bongoscot
    @bongoscot3 ай бұрын

    I have the Mcarbo trigger and springs that I am going to have installed. I was happy to see this comparison to confirm my choice. I don't like the stock trigger at all.

  • @theshtonsesh1278
    @theshtonsesh12784 ай бұрын

    I have the m carbo trigger and striker pin. im glad i made the right purchases😅, i Appreciate the comparisons.

  • @GruntyCaveman

    @GruntyCaveman

    4 ай бұрын

    I’m also using MCarbo’s mag release. I can now drop a mag without breaking my grip. I’m thumb impaired :)

  • @samson7479
    @samson74794 ай бұрын

    Great video. I have about 2,000 rounds with the Mcarbo trigger on my P365 with no issues. Haven't had to reapply locktite on the set screw either.

  • @GruntyCaveman

    @GruntyCaveman

    4 ай бұрын

    Thanks! MCarbo has really left everyone else in the dust on this platform.

  • @EHRpito
    @EHRpito15 күн бұрын

    I had the curved armory craft trigger installed and I recently changed it for the tyrant trigger.

  • @joeblow8525
    @joeblow85252 ай бұрын

    I’m curious if the MCABRO striker and TYRANT trigger shoe would work together and what it would feel like???

  • @GruntyCaveman

    @GruntyCaveman

    2 ай бұрын

    I haven’t tried that combo, but I always check the sear to striker leg engagement using an armorer’s 1/2 backplate after making changes. Just to be safe.

  • @kogasoldier9379
    @kogasoldier937914 күн бұрын

    Really only three factors i care about in a trigger. Does it take up smoothly to the wall? Does it break clean and consistently? Is the reset long or short?

  • @GruntyCaveman

    @GruntyCaveman

    14 күн бұрын

    All of the reasons to replace the stock trigger 🤣, plus reducing the 7+ Lb stock trigger pull weight. I prefer 4 to 5 Lbs for carry.

  • @Dogglegg
    @Dogglegg2 ай бұрын

    Hmm. Now I am reconsidering sig over my Mako.

  • @Christopher-pe6zj
    @Christopher-pe6zj15 күн бұрын

    Why no Ramm tactical? Should check out their trigger.. incredible.

  • @GruntyCaveman

    @GruntyCaveman

    15 күн бұрын

    Because you didn’t buy one for me. I’ll accept beer or cash as an apology.

  • @Christopher-pe6zj

    @Christopher-pe6zj

    15 күн бұрын

    @@GruntyCaveman lol! cheers ! they make a hell of a trigger

  • @LN004
    @LN004Ай бұрын

    Any plans on getting the Grayguns trigger?

  • @GruntyCaveman

    @GruntyCaveman

    Ай бұрын

    No, I have this one squared away. Despite the fact that the MCarbo was the best of the bunch, I switched to the Tyrant with the trigger dingus. Anything to make a Sig safer is a good thing.

  • @danielalbert3754
    @danielalbert3754Ай бұрын

    Have you tried the armory craft trigger?

  • @GruntyCaveman

    @GruntyCaveman

    Ай бұрын

    No, I didn’t try the Armory Craft. It looks well made, but I wanted adjustable pre-travel to get rid of the mile long take up of the stock trigger.

  • @LoneWolfRanging
    @LoneWolfRanging2 ай бұрын

    Couldn’t get the carbo to work on mine. It brings the trigger bar too far forward so that the Safety guard can’t lower.

  • @GruntyCaveman

    @GruntyCaveman

    2 ай бұрын

    Did you adjust the pre-travel screw? You may want to contact MCarbo, they might be able to help.

  • @toddfrye1208

    @toddfrye1208

    2 ай бұрын

    I have the same issue. Recommended pre-travel set. Safety level does sit high. MCarbo has not responded to the fix to the problem. However a few people on SigTalk have suggested filing off some off the material off the back plate so the safety level doesn’t impede with the back plate. Or you can just go with another trigger option (ArmoryCraft)

  • @LoneWolfRanging

    @LoneWolfRanging

    2 ай бұрын

    Pre travel has nothing to do with the issue. It’s the angle of the trigger itself. It pulls the trigger bar forward and presses on the safety lever so that it can’t be lowered.

  • @LoneWolfRanging

    @LoneWolfRanging

    2 ай бұрын

    Yea I am not filing down an oem part, especially the safety lever, 1- for basic safety of its integrity and 2 it’s supposed to be a drop in lever. I’m seeing lots of complaints on mcarbos other products. For instance many say they have light primer strikes with their firing pin.

  • @toddfrye1208

    @toddfrye1208

    2 ай бұрын

    I’m just going by what people are suggesting. Another suggestion was to file off a millimeters off the trigger angle. I am going to attempt to take off some material from the back plate to see if it corrects the issue. Btw a new back plate is about $15.00 and it should not interfere with any safety issues it’s just a clearance issue. To each their own

  • @gjhoward
    @gjhoward3 ай бұрын

    Great video. I have the MCarbo and the Tyrant CNC. My reason for getting the Tyrant was the desire to have some external safety that wasn't a thumb safety. That said, I still prefer the MCarbo.

  • @GruntyCaveman

    @GruntyCaveman

    3 ай бұрын

    @gjhoward Even though the MCarbo trigger is much better than the Tyrant, I'm now using the Tyrant for the added safety, because, you know, it's a Sig....

  • @brandoncooper4868
    @brandoncooper486818 күн бұрын

    🍺

  • @adamcall3664
    @adamcall366426 күн бұрын

    I personally like the p365 stock trigger, but that's just me. However, there's a reason Sig got a military contract.

  • @GruntyCaveman

    @GruntyCaveman

    24 күн бұрын

    You are a strange man if you like that bag of mush, boingy trigger 😁

  • @jmarvosa6x3

    @jmarvosa6x3

    11 күн бұрын

    That reason would be the “lowest bidder”

  • @JuanDiaz-qq2lu
    @JuanDiaz-qq2lu2 ай бұрын

    As much as I love the style of Sig. I just can’t justify a gun going off by its self. If they ever get it right I just might buy one.

  • @GruntyCaveman

    @GruntyCaveman

    2 ай бұрын

    The P365 variants don’t have that issue, or not that I’ve heard of anyway. The P320 on the other hand, I would never carry. Sig just can’t/won’t fix that gun.

  • @tizben

    @tizben

    2 ай бұрын

    ​@@GruntyCavemanI believe they fixed it. But unfortunately, would not carry a p320 without a safety

  • @johnhatchel9681

    @johnhatchel9681

    2 ай бұрын

    Sigs don't go off by themselves

  • @GruntyCaveman

    @GruntyCaveman

    2 ай бұрын

    @@johnhatchel9681 Quite the debate. I read the entire complaint in the class action lawsuit against Sig. Holy crap that's a lot of people with holes in their bodies as a result of bullets exiting P320 barrels. A shocking number. I have no idea if those holes are due to negligent handling/holster issues or a flawed firearm design. It will be interesting to see the outcome of the trial.

  • @uglykidjo
    @uglykidjo3 ай бұрын

    I had the IMT trigger installed by skipz gunz and he did not mention the adjustable take up screw on the IMT which I really like, not sure anything else is much different?

  • @GruntyCaveman

    @GruntyCaveman

    3 ай бұрын

    I'm sure Skipz just set the screw to the minimum take up possible while preventing the defeat of the plunger.

Келесі