4 years later and this video is still doing the lords work! This helped me exchange my 365XL grip module to the X Macro. Thank you!

You made it look so easy. Thanks for pointing out that safety lever. I have not had it done on my 365, but now I know that there is something else to check for putting on the slide. Keep up the good work and take care.

Glad I found your channel!...I love my EDC 365XL & I see myself changing a few things. I'm new to the firearms world & the info you give is well appreciated 🤜🏾🤛🏻

I know I'm a year late but gosh dang this is such a great and informative video. Step by step awesome. Thank you much sir!

@SigGuy

3 жыл бұрын

Never too late especially for a great compliment. Thank you sir. I really appreciate it. 🙏🏼

This video is the key to understanding that this gun the part you need an FFL for is the FCU. What is so cool is that if you have purchased either variant 365 OG or XL, you can simply buy the alternative grip module, alternate slides or barrels and simply plop the FCU into it. This means in a matter of minutes you can go from deep concealed to XL. you can literally have 4 or 5 different configurations if you have alternate grip modules, slides barrels or triggers. Truly dynamic. I'm so happy i purchased this platform. One thing that should be noted is you may need XL and original mags if you plan on swapping out XL grip module for the original smaller module and he did overlay that message, but overall truly amazing video.

I’m new to the Sig world…the simplicity blows my mind!

The 365xl is next on my purchase list, and I can't wait to customize it with one of these grip modules. Thanks for showing how it's relatively easy.

Thanks SIG Guy, your instructions were perfect. Excellent description.

Sig really has the whole ergonomic thing down pat, my 226 with e2 grips is perfection , I put a limbsaver rubber wrap around on it and it is superb.

You make it look easy, great video.

Helped me through the process without a hitch! Thank you Sig Guy.

@SigGuy

3 жыл бұрын

You are very welcome and thank you!

Was doing my install, that angle of the front is key to getting it seated. Your video helped. Thx.

Great video! I just picked up a P365 XL and was looking into customization options

Good video and informative. I own several Sig weapons and the 365 is my next. That grip module is the stuff.

I received my P365XL earlier this week and it made a squeaky sound when performing a dry fire pull of the trigger to the stop. With your videos and knowledge sharing, I felt comfortable enough to take the gun apart (FCU removal). A little oil on the trigger spring solved it! Couldn't have done it without your videos! THANK YOU!

@SigGuy

4 жыл бұрын

Love positive feedback like this. Makes it all worth it. Nice work sir! Enjoy your weekend and your new pistol. 🤙🏼

@JerryLee..

4 жыл бұрын

@@SigGuy if it wasn't for your videos, I wouldn't own the P365XL. Thank you!!

@SigGuy

4 жыл бұрын

Big-J well crap. If it wasn’t for you I wouldn’t do what I do. Now what?!?? 😁😉🙏🏼

@JerryLee..

4 жыл бұрын

@@SigGuy LMAO!

New Subscriber. Really enjoy your videos. You sound like you are enjoying sharing your knowledge, Thank You. It's like sitting down with a friend.

@SigGuy

4 жыл бұрын

WARDofLORE aweeee. Thank you sir. That was a really great compliment. I really appreciate it.

I got like and subscribe so quick!!! Thank you for sharing your knowledge. Super excited to know how to modify my 365xl. Cheers!

@OGCJ10

2 жыл бұрын

How do you like the XL ? .. Debating between the XL and the standard 365. Do you find that it prints with the longer grip?

Thank you that was super easy. I bought one from Greyguns before I watched your video. Nice module but I wish it had a bit more stippling like yours. Going to order a couple from the site you mentioned.

@SigGuy

4 жыл бұрын

Tim McGrath the GG modules are nice. Definitely a step up from factory. The Armory crafts are excellent though. They should have more in stock very soon. They are currently redesigning them. Almost done.

@timmcgrath6496

4 жыл бұрын

Just another little tidbit, the GG modules come with the mag release...

Great video, perfect camera work. I don’t need to see a guy and his house talking about a gun this works perfect and gets you up close. Subd

@SigGuy

3 жыл бұрын

Thank you for the positive feedback sir. I really appreciate it. 🤙🏼

Just got mine and it works a charm :)

I am very glad to have found you. BTW I just checked and 365 grip modules are currently out of stock. I’m in Massachusetts so I have to have a thumb safety, and Armory Craft won’t have any p365 xl grip modules with safety until Sig makes it available to them. They don’t make that model yet. I went to the factory store last Friday. Great video.

@62dobie

4 жыл бұрын

Mark S Delaney, why do you have to have a safety?

@marksd5650

4 жыл бұрын

BIG LOU Massachusetts compliance laws. External safety or a ten pound trigger pull, and no more than 10 rounds in the magazine. The P365 is Mass compliant but the P365xl is not yet MA compliant. There are not many hand guns that are MA compliant.

Very informative! Thanks

Thanks very helpful!

Just ordered the brown for my p365xl 🙌🏽

I just installed mine. Love it

@frankpalermo9307

3 жыл бұрын

@In Korea local shop

This video is great. Deffinatley a new sibscriber and customer as well cant wait for these grips and triggers to be back in stock. I just wish there were cerakoted 15 rnd magazine base pads

Excellent video!

@SigGuy

4 жыл бұрын

J. D. Thank you!

Thanks, video is a great help!

That was such an easy swap out. Def want to do this to one

Great video as always Buddy!

@SigGuy

4 жыл бұрын

3oh much appreciated sir. Thank you!

Sig Guy, I know this video was 3 years ago, but, i just saw it. I loved that grip module and also the mag release and ordered them both. I've never done any work on my firearms until watching this video and also the one you made to change the mag release. I've always been worried about messing something up and blowing myself up..lol.. These videos are AMAZING and slow and patient and informative. Thank You so much for step by step and the tips and tricks and not assuming everyone is Navy SEAL gun and a gunsmith! I don't know if you'll ever see this and anyone else who might can answer my question: Does the new mag release ever wear in or get easier to eject the mag? The standard stock release that came with it was hard to push and release was sorta meh. The new extended release is just as hard and doesn't eject or click, the mag just kinda falls out and i wanted to know if this was "normal." Again, thank you very much for the great videos!

Sorry I was being inpatient I watch the whole video and you did mention it thank you very much.

Good Training! Thank you

Cheers, well done!

Been looking for this grip module forever. Finally found it, then the spectre comp and macro come out. I personally like the spectre comp. Was just on Sigs site to see about a spectre comp slide. $500. Nope, not doing that. Would be awesome if a company made a comp slide that didn’t cost that much. I’m thinking $200 max. I know, keep dreaming.

Very cool grip modules..

@SigGuy

4 жыл бұрын

Jim Rodriguez thank you sir.

fantastic video. you covered soo much. gj bruh

@SigGuy

3 жыл бұрын

Thank you sir for the excellent feedback! I appreciate you! 🙏🏼

Nice video demonstration.

@SigGuy

4 жыл бұрын

David Meyer thank you sir.

I use the P365 grip on the XL slide when I wear shorts and T-shirt. The grip is less noticeable about 3/4 inch.

@MaddoxLyrics

4 жыл бұрын

adaboy4z yesssss finally someone agrees lol long barrel short grip is way more concealable and shootable than the short slide long grip

Great video

I asked you if i should send my P320 in for the upgrade a few months back you said i should even tho i had the Apex trigger installed, and you were so right and Apex gave me credit for the trigger and i bought the new one for the upgraded trigger and a upgraded trigger bar. I must say i do like the Sig trigger better than the Apex but with the Apex trigger bar,now I'm waiting on the Armory Craft flat trigger. Thank you for your advice. and Sig had it back to me within a week.

@SigGuy

4 жыл бұрын

Larry Baker wow. Great turn around!!! Thanks for the update. Apex is a great company. Can’t wait to see those AC 320 triggers out there!!!!!

Great video! I called Armory craft and what a nice group of guys! I’m new to my sig and they treat you like a friend.

@SigGuy

3 жыл бұрын

One of many reasons I prefer to do business with them as well as be a distributor of their products. If you need anything feel free to check out my website. Sigguy.Com

@michaelbattin6717

3 жыл бұрын

I’m going to order “we the people stand” will it fit my p320 x compact as well my p320 x5 ?

@SigGuy

3 жыл бұрын

X5 definitely. Which grip on the xcompact?

Fantastic video! Subscribed

@SigGuy

4 жыл бұрын

Fausto Atkinson thank you very much. I really appreciate that!

Great video thanks.

For big hands the standard 365 with the XL grip module is the best of the 2 worlds, I fell firm and complete with the 12RD, the Hogue grip, visually make sense.

@ArmedAngler

Жыл бұрын

And you can run a 15 round too right? I have a p365 and it doesn’t fit my hand well. Have the Lima laser too. Wondering if it will fit on the XL module (the 365 slide and Lima laser on XL module)

@josedelarosapr

Жыл бұрын

@@ArmedAnglerYeah! everything fits in the module of the Sig p365, but if you want to use the 10-round magazine, you have to upgrade the base plate, I bought 10-XL CONVERSION BASEPAD FOR SIG P365XL from tactical development; This is a video when I do my upgrade kzread.info/dash/bejne/iaeZ28uTj5C5n6w.html .

XL grip modules w mag release and safety cuts are back on Sigs website. They have black and gray. I got one of each for my reg p365.

Great video thanks subscribed!

Great video Ty

Great info.

I really hope these will be available for the thumb safety model

@undercovercop2000

4 жыл бұрын

rick c fudd detected

The red grip module is very nice

Just received one of the new grip modules they have in your video. Unfortunately they redesigned it a little bit if you look at their website. I like your old design better.

Awesome video. Was wondering if you could post a picture/video of the gold trigger that armory craft offers. Want to compare it to the true precision gold barrel.

Where can I get that Sig armorer block and green punch from? I really don't wanna scratch my frame taking out that pin.

Just got my ceracoated AC XL grip module and installed perfectly using your video. One question though, it seems the ceracoating on the inside of the mag well causes the mags to not drop free compared to my non coated frame. Is that your experience? Any correction?

Do you see in improvement in accuracy with the Armory craft trigger upgrade?

So these are going to be available for the P320? I'd like to get some of these for my X Compact.

I have the Wilson Combat grip module. The cost was about 75.00 including the extra & optional Tungeston weight kit which I think was 20.00-I think it was worth it as it added about 20 grams of weight to the grip module.

Be nice to have a bigger grip front to back. Keep the same width, but give it a bit more front/back grip depth.

Bought my 365 yesterday saw this video and went straight to Oder a tungsten grey

Are the rails different from the stock XL frame? I had to buy a TD rail for my XL. Does your frame have the same issue or is it good to go?

Thank you, thank you, thank you. I’m upgrading my X-Carry and 365XL. Your videos are so professional! Keep up the good work, S/F, DMC PS. Any thoughts on a suppressor height front sight for my P320 X-Carry? I have a Romeo1 red dot. I can buy the Sig XRay3 set, (front and rear), but I’m looking at the Sig #6 front sight. I just can’t find it anywhere. Ultimately, I would like to co-witness with my red dot like my 365XL paired with my Romeo 0 does.

That’s cool to know thanks for sharing!!! 🦅🇺🇸🦅🇺🇸

Thank you!! Your videos are great, very informative. Quick question, would you know if the Armory Craft pinky extention works with the Katana magwell flare?

It’s pretty, does it come with a matching holster?

Wow, I was about to take mine in to switch out the grip module…thanks for this! I would like to change the mag release on my husband’s p365 to the right side bcs he’s a lefty; do you have, or could you do, a quick video on that?

@SigGuy

2 жыл бұрын

There are 3-4 videos on my KZread channel showing this. There are many videos covering the 365 and 320 you also might be interested in. Here is the link to one of the mag release videos. Good job by the way! kzread.info/dash/bejne/X3WMwZOhp6-sp6w.html

Will they work for the 365ms

I looked through your videos and didn’t see a review on the p365xl. I’d be interested what your thoughts on with the XL. Have a P320XC and was looking at the P365xl for my wife.

@SigGuy

4 жыл бұрын

Mark Barefield I don’t own an XL. I have an xCompact they fills that roll. I want my EDC to be as small as possible.

Very informative, especially for an excited new sig owner! The extended mag release is something I am considering because my wife has a little difficulty sometimes getting to it. Is that a difficult thing to do yourself ? My only experience is with the glock 43x, thanks in advance community

@SigGuy

2 жыл бұрын

Thank you for the compliment sir. Here is a video on the extended mag release. There are several on my channel. It’s the exact same process for both the P365 and P320. kzread.info/dash/bejne/paiXmaOtYKitcps.html

You have the exact build I'm looking to do

@SigGuy

3 жыл бұрын

If you have any questions just let me know!

@altf4thc

3 жыл бұрын

@@SigGuy thanks! Will do. Can't wait until i can afford one.

Since the P365 X has (I believe) the same slide as the regular 365 but the grip of the XL. Could we put a 365X module on a regular 365 and essentially turn it into a X?

Those are all just fuckin beautiful bro

After cleaning the FCU where should you apply grease or lubrication?

Just wondering if Armory Craft still makes the stainless trigger shown in your video? Didn't see that color available...

Mine arrived grip module damage, my P365 X. There is a gap between slide and grip module. Slide was wobbling and rattling. The problem is the grip module inside, where it connects to the FCU, replace the grip module problem solved.

i think im gonna pick the xl up soon

Excellent video. .. Can the 365 No manual safety be converted to have the manual safety? Thanks

@Agent-vj3ns

4 жыл бұрын

Yeah but the safety lever and tiny pin/spring sell for about $140 now. They used to be $30 when there wasn't shortage. Now the reg p365 sells for $700 on GB

Are these exact molds of the Sig modules? I want to buy one of these from Armory Craft but I have a custom holster coming to fit the XL with Olight mini and TacDev Rail adapter. Great video! I will be back to watch again when I’m swapping grips!

Add links to the descriptions!

Have you tried the grey guns frame as well? If so which do you like better and why?

I'd like to see when they're going to make the slide release and the takedown pin and stainless and red and blue and yellow

SAS owner, though I'm replacing the SAS slide-catch with the standard P365 lever, and I'm wondering if I would still need to modify thr grip module to fit the SAS slide?

@03697824

4 жыл бұрын

How do you change the lever?

How does the gray guns module fair with wear? Holstering it does the cerakote wear off? It says it does on their website so I wondered if a $200 investment was worth it since I need a manual safety cut out as well.

Do you have a link ?

Sig Guy, have you seen the Icarus 365-365XL-320 lower all aluminum grip module? Its all aluminum and the 365-365 grip module has a pic rale.

is this the XL grip on the regular 365

I just installed the gray guns grip module on my p365. Really like the Amory Craft one but they were all out for awhile. Really impressed at both Grayguns and Amory Craft. Customer service on both are incredible. Anyways, I would really like your opinion of the true precision barrels. I was thinking of trying one but want to know if it is worth the money. This is for my ccw pistol.

@austinmitchell2746

3 жыл бұрын

Have you tried both the armory craft and gray guns modules or only gray guns?

@takingaim7298

3 жыл бұрын

Yes i tried both. Both are great triggers but the grayguns felt more comfortable to me. I d like to try their curved trigger. I heard it is awesome

@austinmitchell2746

3 жыл бұрын

@@takingaim7298 I was actually talking about the frames not the triggers

@takingaim7298

3 жыл бұрын

@@austinmitchell2746 lol sorry man i m slow lol. I haven t tried the Amory craft module. Most of the time i d look they were out. Maybe i ll try one at some point. I love the look of them

@austinmitchell2746

3 жыл бұрын

Any chance you tried the hogue grip?

Thank you for the video! Are these grip models compatible with a p365 Sas?

Is the ac grip mod worth the $150 it costs. I’m looking at the form, but mainly the function. Does the forward grip stippling work? Or is it too small to help?

good

How long did it take to receive the grip module after ur order? Really want to know cause I can't wait to buy one. And great video by the way

@SigGuy

2 жыл бұрын

If they are available they will be in stock and shipping is the same as any other part. Couple days. A lot of times they are not in stock. You would need to check Armory Crafts website. I do not sell these on sigguy.com.

Does this help with the slide wobble up and down in the front that some P365 have.

Hi SG - Apologies if this has been asked previously. Will the AC grip module work with a holster designed for the SIG P365 grip module? Are there any size differences in the trigger guard, etc.?

I've want a tungsten gray grip module for my P365XL. Can't find one.

I have the nra tan p365. Which color would you recommend on it? Bronze or the fde brown?

Also have you tried out the hogue grip??

Will these work with the 380 version of the P365?

I know this it to late for xmas but what do you think could be a great intermediate tool set I would get for a sig handgun person. Thx.

@SigGuy

4 жыл бұрын

Michael McMahon I’m sure there are lots out there for pistols. What I have are tools just collected throughout the years. Hammer with nylon and brass and obviously, various size punches, pics, miniature kit of various pliers, armorers block. Stuff like that.

Grip Modules are BEAUTIFUL BUT EXPENSIVE !! To Expensive For Me !!

@THEMANCAVE2023

4 жыл бұрын

Yeah you could have it done cheaper

New here...what barrel is that on your 365? Threaded? Oops...should've waited longer in the video... Thanks for the discount code.