Thank you so much for taking the time to review our machine! We're thrilled to hear that you enjoyed using it and found it helpful,which will motivated me a lot . We're always striving to improve our products, so we appreciate any feedback you have. If anyone has any questions about the machine, feel free to ask and we'll be happy to help.

@ltsallwood

Жыл бұрын

Where is Arccaptain products made??

@fsj66

9 ай бұрын

Is this machine pilot arc?

I’m just learning to weld at 58. I purchased one of these a few weeks ago and I’m going to get it set up tomorrow now that I have the rest of my equipment set up. Thank you so much for posting this video.

@FMJeeping

Ай бұрын

You're welcome. Learning to weld is challenging and rewarding. One of the best things I've learned in life. Good luck .

@lcogan65

Ай бұрын

@@FMJeeping I got it set up and started using it today. I am super happy with it.

@FMJeeping

Ай бұрын

@@lcogan65 awesome!! Enjoy

It's beautiful and this modern tech has unbelievably improved and reduced the size and weight most 50 am plasma are big and heavy. It goes from 240 to 120.

Lol, retire it!!!! Such solutions for things that never should have been! The plazma cutter seems more interesting🎉 And one without a blinking screen 😂

I appreciate your comments. Our welders have those charts inside the cabinet. Buying it in a sale in the morning fot $199.

I'm buying this in the morning.

awesome man! glad the arc captain is treating you well!

@FMJeeping

Жыл бұрын

Thanks Nate!!! Also to thanks for the assist!!

Thanks for the review. I watched after i bought this machine but before using it.

@FMJeeping

Жыл бұрын

You're welcome. Enjoy the machine.

Thanks for the review Mark.I wouldn't mind having a plasma cutter like that.Sure beats the old Death Wheel...😁😁💪👍👍

@FMJeeping

Жыл бұрын

Thanks Dan. It's not a bad little machine and will be nice to have in the shop. The death wheel has its place. But so does a plasma cutter

Looks great.just what I need. Just downloaded and subbed. Im an iffriad Jeep guy. Dandahermit.🎉😅😅

For the Price I would say it beats Lincoln simply over the price and weight and performance for price

@FMJeeping

7 ай бұрын

The arccaptain has been a good add on for my fab tool collection. Im very happy with it.

I really wouldn't consider Lincoln to be a mid grade welder, they have been around for a good many of years

@FMJeeping

5 ай бұрын

Fair enough. I wasn't trying to talk down about Lincoln. The Lincoln's I have seen were mid grade machines. A lot of people have had great luck with them, but mostly diy 'ers.

I really liked your video. Thank you. Just some info and a question. When you are cutting-watch the sparks. If they are or start going out the end or coming up-stop right there and start from there again. Question--do you have any idea of the CFM at the highest pressure -which I think your highest was 60 PSI ? Thanks again.

@FMJeeping

9 ай бұрын

Thanks for the tip. The highest the machine is rated for is 60psi iirc .

What adapter did you use to go from metric thread in the regulator to the npt air fitting. Thanks

@FMJeeping

5 ай бұрын

It was an adapter I had kicking around the shop.

Water seperator. Not sure separator.😅😅

How do you change the quick disconnect?? I took the case off and can’t figure it out and don’t want to just pull the blue part

@FMJeeping

7 ай бұрын

The quick disconnect on the air line can be changed without taking the case apart. I added it so I can quickly put it on my compressor. Normally it takes 2 wrenches. You hold the nut on the machine side steady. Don't let it twist. Then you tighten on the air compressor side. To remove it is the same idea. Hold the air separator (machine side) steady. And back off the air fitting

@pauls5711

7 ай бұрын

I used a pair of vise-grips to hold the square part of the regulator and a 14mm wrench to unscrew the hose fitting. They use thread sealant so it requires some force

How's about stainless. I have 10 gauge project to do. It looks great.😅

@dandahermitseals5582

5 ай бұрын

Meant 20 gauge aluminum

Is this a pilot ark Plasma cutter

@FMJeeping

Жыл бұрын

No, it's not a pilot arc machine.