MORE WELDING AND FABRICATION VIDEOS HERE:kzread.info/head/PLfbf78fMz9Vol0uX2-GNc6mLi75zpqb5f LEARN HOW TO WELD VIDEOS HERE:kzread.info/dash/bejne/c3iVk6tsYZytepM.html

@jalco2007

Жыл бұрын

Tnj H

Thanks for the yeswelder plasma cutter. As a result I ordered that same unit directly from Yeswelder as they had a promo code giving a 30% off an already lower price, plus free shipping. I am new to the metal works, having been an accomplished woodcrafter for over 30 years. Thought it time to do something I’ve always wanted to learn. Being 78 your never to,old to learn. Thanks again I am a huge fan of your channel. Signed The Old Student!

@BrandonLund

2 жыл бұрын

@Bruce Pugsley thanks for your support man I appreciate it! AWESEOME score on your plasma cutter! You are going to have a ton of fun! I'm 51 and I still learn new things every day. It would be boring if we didn't. I worked with wood for a liitle while and I have to say you are going to love the transition - Hardly no dust equals a clean workshop. If you make a mistake, just add metal. Much easier than wood in my opinion. Enjoy your new purchase and thanks again for your support! 🙏👍

@michaelwillcutt2619

Жыл бұрын

A real auto plasma that has a built in air compressor an still portable is best for portable uses

@rafaelfelix4227

Жыл бұрын

Evry day is somthin new and we keep lerning

@KTannerPaisleyKK

4 ай бұрын

Be careful,Seen my elderly neighbor overestimated himself and get hurt. Reflexes and other factors fail suddenly

Im a newbi here with my first plasma cutter, one comment when cutting out a shape or shortening a piece of metal, use the guide clamped to the part you want to keep. The guide will protect the piece from any wobbles like the demo cutting angle iron, the guide was on the wrong side and his vertical cut took out metal from where it was needed. 2nd tip. Want to cut a perfect round hole. Get a thick washer and center it over the place for the hole. Just weld it through the center to the base metal, then using the plasma cutter, go around the washer keeping gentle pressure against the washer and down on the job. The hole will be perfect if you keep the tip vertical. The washed dia plus the tip diameter equals the hole size. Its that simple.

Thank you, Brandon - extremely well presented, no waffling, no nonsense. Clear demonstration of basic operations. Not planning on cutting armour plating here, but for "normal thickness metals a small unit looks like a worthwhile investment. No angle grinder noise, and NO dust. Thanks again - will hit "Subscribe" in a second 😊

@BrandonLund

2 күн бұрын

I appreciate that! Thank you!

Great video for a guy that’s getting a cutter and has zero experience. Thanks!

@BrandonLund

4 ай бұрын

Thanks man!

Just watched this video again (maybe the fourth time?😳) It is such a good comprehensive video with all of the pertinent information you need. No annoying music is a huge bonus. Just clear concise info from a guy that cares! Bravo!

@BrandonLund

Жыл бұрын

Wow, thank you! I appreciate that! It's always nice when I hit the mark. I had fun with this video :)

I’ve never heard a better explanation on plasma. You’re a natural teacher. Thanks

@BrandonLund

2 жыл бұрын

You're very welcome! Thank you!

@AXNJXN1

2 жыл бұрын

Agreed... Vrey well done.

@BrandonLund

2 жыл бұрын

Thank you!

@nathanmciver6496

Жыл бұрын

Yeah really easy to see! Good job!!!! You make people have somthing to keep going with! Best explanation I have heard!

@BrandonLund

Жыл бұрын

Thank you Nathan i appreciate it! 👍

This guy is a very good instructor explains everything in great detail the best video out there for plasma cutting for beginners thanks man you make the best videos

@BrandonLund

2 жыл бұрын

@you become what you think about Jay s you made my day! Thank you!

@carlospena-cz6oe

2 жыл бұрын

I agree, good lesson

This is a VERY good educational video and a thorough introduction to plasma cutting. Best I've seen and I've been watching a lot of these over the last couple days. Thanks Brandon Lund!

@BrandonLund

Жыл бұрын

Thank you so much! I appreciate that! @r0ckworthy

I know how to use a cutter. Just always touch on the basics from time to time. But you are really good at tutorials from a beginners standpoint.

@BrandonLund

10 күн бұрын

I appreciate that! Thank you 👍

I have never used a plasma cutter but by watching your instructional video I think it would be worth a try! Have used a oxy-acetylene torch and an air arc and now all I have to cut steel with is a cut-off disc (4.5")or a sawzall since I retired. Thank you for putting your videos on youtube for us to learn from!

@BrandonLund

Жыл бұрын

Thanks! My pleasure!

Plasma Cutter! Where have you been all my life? What a wonderful tool. The contortions I went thru to remove some metal are now a distant memory. Thanks for filling in the unknowns and teaching me some technique. Your video is great for rookies like me.

@BrandonLund

Жыл бұрын

Fantastic! Thanks for watching!

Got one a few months ago and glad I did. I used to go through so many cutting wheels. Bit of a learning curve to this like anything else, but it doesn't take long to get the hang of it.

@BrandonLund

3 жыл бұрын

Spot on and great comment!

Fantastic vid. I knew nothing about plasma cutters, but I learned a ton by watching this. Well done.

@BrandonLund

9 ай бұрын

Glad to hear it! Thank you!

Love your videos. As a former teacher you do an excellent job addressing all learning styles. Students pursuing a vocational/trade school education would benefit from your experience and teaching ability. I recommend your videos to all students interested in welding.

@BrandonLund

Жыл бұрын

@MCHorner Thank you very much!

Yeah, I'v ruined saw blades and drill bits when using bed frames for welding practice, now I use the plasma cutter and can use it to punch bolt holes or cut the frames. Thanks for your video it is a great one.

@BrandonLund

6 ай бұрын

Same here. Your spot on about using the plasma to punch holes too

Great video tutorial. I just bought a Vevor Cut50P because I had a lot of 1/4" plate to cut for a project. My pancake compressor ran all the time so I added a 5-gal portable tank and now my compressor usually remains off until I'm finished with the cut. I really appreciate your table of amps, air and material thickness. Nothing like it in my owners so it's a big help.

@BrandonLund

Жыл бұрын

Glad it was helpful! Great idea on adding that auxilary tank also!

Thanks for these lessons, they are so informative. I'm about to buy my first plans cutter today. I would not feel prepared without your lessons. Thanks again.

@BrandonLund

Жыл бұрын

@dailygumbotv congratulations and thank you for your kind words. PLUS i noticed that you are a recent suscriber so thank you for that 👍

Thank you for taking the time to clearly explain this process. It's so hard to find good videos on KZread that actually give you some real knowledge. I really appreciate your video.

@BrandonLund

7 ай бұрын

I appreciate that Thank you!

Great video and information. Thank you for putting in the time to make this video and share your knowledge. 👍🏽

@BrandonLund

3 жыл бұрын

Thanks! I appreciate your support!

I’ve watched maybe a dozen videos on this plasma cutter. Yours is much better than any other I’ve seen. Two thumbs up. So I’ve subscribed.

@BrandonLund

Жыл бұрын

Thank you so much @Mark Stadsklev I appreciate the sub and your support!

Hands down the best instructional on using a Plasma Cutter. Thank you

@BrandonLund

Жыл бұрын

Wow, thanks!

You have explained so beautifully, so clearly and subtly even the smallest things so clearly, it is a great help to people like us. We kindly ask you to post a lot more videos like this. We extend our heartfelt congratulations to you for growing even more.

@BrandonLund

2 жыл бұрын

My pleasure 😊 That is so nice of you Thank you! @Tamil Birds

Thanks Brandon, just got my Plasma unit into the shop and found your direction and explanations very helpful, much appreciated.

@BrandonLund

Жыл бұрын

Glad to help Alan. Thanks for your support

Brilliant video. Best instructor on the web👍🏻🙏

@BrandonLund

2 жыл бұрын

Thanks Joe I appreciate it!

This video is the best tutorial I have ever seen 😍 Thanks for sharing your knowledge 🙏

@BrandonLund

2 жыл бұрын

Thank you @Mary Martin I appreciate it! 🙏👍

Great video & clearly explained, thank you! I'm new to plasma cutting & welding so I'm going to take on board your expert knowledge. Thanks again

@BrandonLund

Жыл бұрын

Glad to help!

Thank you for making this very informative video. I can't wait to try these tips!

@BrandonLund

3 жыл бұрын

Glad it was helpful!

Well explained Brandon it’s the best tool for cutting easy to use and store great vid 👍👨🏻‍🏭🇬🇧

@BrandonLund

3 жыл бұрын

Thanks 👍

Watched this and your delivery and discount code sealed the deal.. I am now an owner of a plasma cutter... Excellent content Brandon! Thank you!

@BrandonLund

5 ай бұрын

Awesome, thank you! Enjoy!

Thank you for sharing !! Many videos don’t show how start cutting ie touching or must have gap.. you explained it finally!! Thanks!! I just purchased one and it’s full 220 volts and does up 1/2 inch thickness. 45 years using oxy/avg torch. This is my first. 😁

@BrandonLund

Жыл бұрын

You’re welcome 😊 Glad it was helpful!

Bought few years back and regretted not having one sooner. Good video !

@BrandonLund

3 жыл бұрын

Right on and thanks! They are super handy!

Excellent, detailed, and informative explanation! Talented teacher!

@BrandonLund

Жыл бұрын

Thank you! 😃 @khaledyousef6821

Thank you for all your videos! I enjoy your attitude and motivational attributes!

@BrandonLund

2 жыл бұрын

Thanks Vencent! I really appreciate your comment! 🙏

Brandon you are an incredible teacher.

@BrandonLund

Жыл бұрын

Thank you so much!

Greatest video i found regarding plasma cutter intro.... appreciate your work and knowledge keep it up

@BrandonLund

2 жыл бұрын

Thanks man I appreciate it! @Norman Aziz

You rock Dude! Your explanation/information is absolutely fantastic!!!!!Thank You.

@BrandonLund

3 жыл бұрын

Thanks man! I appreciate your support! 🙏👍

Thank you very much for a thorough instruction. I am completely new to metal working and this was incredibly helpful to me.

@BrandonLund

6 ай бұрын

Glad it was helpful and I appreciate you watching! Holler if you have any questions

Thanks for sharing with us Brandon. I will stay with you on this channel. Good luck and stay safe on your new channel. Really enjoyed the tutorial on the plasma cutter. Fred.🙏🏻🙏🏻👍👍👏🏻👏🏻👋👋

@BrandonLund

3 жыл бұрын

Thanks Fred I appreciate it! I figured by keeping this channel ONLY welding and metal fabrication that I'm giving the viewers what they came for :)

Best video I've seen on plasma cutting.

@BrandonLund

2 ай бұрын

WOW I appreciate that! Thank you! 🙏

Great Video. It’s really appreciated. I just got a Amico CTS 180 and the settings guide you showed will really come in handy. Great instructions also. I will be checking out all your Videos. Thanks again👍

@BrandonLund

2 жыл бұрын

Thanks @joeybobbie1 that chart has saved my consumabels a lot! If you are into building stuff this is a popular playlist kzread.info/dash/bejne/aoOfmK6OdKm9pZc.html Thanks for watching and commenting!

best learning video about plasma cutting I have seen and I have seen a lot

@BrandonLund

2 жыл бұрын

Thanks @Willy Haug I appreciate it! 🙏

Very good video! I just watched it for the 2nd time, after purchasing a plasma machine, and trying it out. Thanks!!

@BrandonLund

Жыл бұрын

Thanks Rick and congratulations on your purchase!

Great video Brandon! To help with the consumable tip wear and easy straight lines I picked up a guide that slips over the gun tip and has 2 little wheels that lift the tip slightly away from the surface you’re cutting. Also comes with an attachable rod that you can cut perfect circles with. I am NOT in any way associated with this company but I purchased mine from Eastwood tools.

@BrandonLund

Жыл бұрын

I've seen those Hugo but haven't had the chance to try. I have used the circle cutter guide which is pretty slick! Thanks for watching and commenting!

Awesome video. I use a lot of bedframes people are throwing out. Now I know why my portable bandsaw blades keep wearing out so fast. Thank you.

@BrandonLund

Жыл бұрын

Anytime Everette! They can be hard on blades. I've gone through my fare share as well lol

It feels like I just learned everything I needed to know about Plasma Cutting. Great video!!! You have 1 new subscriber!

@BrandonLund

2 жыл бұрын

@Greenrida31 thanks man and I appreciate the sub!

What a great video❤ thank you so much❤ I'm an old man who has been welding since the 70s and I'm helping a neighbor with a fence project and they have a plasma cutter brand new in the box and I've never used one❤

@BrandonLund

6 ай бұрын

That is awesome! I appreciate it man!. Thank you. Plasma cutters can be a HUGE timesaver and it's noce not to have to buy expensive gasses.

@Bob-gn8ph

6 ай бұрын

@@BrandonLund ❤️John 3,16 ❤️

Brandon, just a follow up on my plasma cutter. It was interesting. I have a CUT 50P that I got about three years ago. I took your ideas from you video and I found two problems. 1. The electrode was nice and tight but the electrode cover was a little loose. 2. Where the plasma cutter torch connects with the actual machine was quite loose. I tightened it up. After that, my plasma cutter works great. I haven't had any problems getting the plasma part starting up after the high frequency starts and I'm close enough to the material I'm cutting the plasma comes on and I'm cutting. So thank you very much. Watching you welding and plasma videos have been a great help in learning to fabricate metal.

@BrandonLund

Жыл бұрын

Oh man thats awesome! Thanks for sharing! It can be super frustrating trying to figure out these issues! Right on man!

Thank you for being so thorough !

@BrandonLund

Ай бұрын

You are so welcome!

Very nice 👍. You have answered all the questions I had! Explained everything I was concerned with. 😊

@BrandonLund

4 күн бұрын

I'm glad to help Thanks for watching!

I am a welder and i love you videos the look very profetional

@BrandonLund

Жыл бұрын

Thank you very much!🙏

You are a very good instructor, great video

@BrandonLund

2 жыл бұрын

@basil miranda thank you very much!

Thanks Brandon, very helpful!

@BrandonLund

2 ай бұрын

You bet!

Great job explaining plasma cutting! Thanks.

@BrandonLund

Жыл бұрын

Glad you enjoyed it! Thank you!

Excellent and informative, I learnt heaps.

@BrandonLund

3 жыл бұрын

Thanks! :)

excellent training session, was going to buy one without fully understanding how to use it. this was a great session, will search further programs to help me develope my hobby

@BrandonLund

2 жыл бұрын

Thanks for your great comment @phil cordon I appreciate it!

Thanks, a very good video with clear explanation and...best of all, you quickly get to the point.

@BrandonLund

Жыл бұрын

Glad you liked it! Thank you!

Great video. You're a good teacher

@BrandonLund

Ай бұрын

I appreciate that!

Thanks for this informative video. Finally i have the answers i was looking for. How to adjust the plasmacutter and how to actually cut with it. More precisely how to aim and if i am supposed to touch the material with the torch or let it hover above. (different types of torches) Great video and thanks again. 🙂

@BrandonLund

7 ай бұрын

Thank you for your great comment! You are very welcome!

Great 😃 Very instructional and no bs. Thanks 👍

@BrandonLund

Жыл бұрын

You're welcome!

Thanks for the clear explanation i learned a lot about plasma cutting.

@BrandonLund

3 жыл бұрын

Thanks Rey I'm glad I could help! I appreciate your support!

I've never used welder or plus a cutter, this is a perfect video 👏🏻👍🏻 Than you! Subscribed

@BrandonLund

2 жыл бұрын

@M P Thanks for the sub! Much appreciated! 🙏

Thank you for sharing. I just ordered the same plasma cutter. Looking forward to working with it. Great video.

@BrandonLund

2 жыл бұрын

Thanks man and congratulations, you are going to love it!

Thank you for providing a plasma chart 🤗

Great video and explanation of everything i ordered one and now i feel better about how it works

@BrandonLund

11 ай бұрын

Glad I could help. Enjoy!

very very good instruction Brandon Thank you!

@BrandonLund

2 жыл бұрын

Thanks man I appreciate it Marc!

Best instructions I've seen

@BrandonLund

Жыл бұрын

Thanks man I appreciate it!

Thank you! Very informative! I learned what I needed to know!

@BrandonLund

Жыл бұрын

Thanks Nick!

Thanks for the great tutorials really love them😊

@BrandonLund

3 ай бұрын

You are so welcome!

Thanks Brandon. Always great information

@BrandonLund

9 ай бұрын

My pleasure!

Appreciate your videos helped me quite a bit getting started keep it up looking forward to more

@BrandonLund

Жыл бұрын

Glad to help🙏👍

I get my plasma cutter after I watching your video finally no need to deal with eny gas very educative thanks 🙏 👍

@BrandonLund

2 жыл бұрын

Enjoy it It's a lot of fun and MUCH cheaper than buying gas!

Many thanks. Just the tutorial that I needed.

@BrandonLund

Жыл бұрын

You're welcome!

Love this tutorial! Thank you!

Great clip. Thanks!

@BrandonLund

4 ай бұрын

Thank you!

Good vid, thanks!

Thanks so much really helpful.

@BrandonLund

5 ай бұрын

You're welcome!

Thanks, Brandin, I learned some good tips!

@BrandonLund

Жыл бұрын

Glad to hear it!

Thank you for your expertise and your concise tutorial, just what I needed to get started using my new plasma cutter..new follower right here !!!... .fingers crossed :)

@BrandonLund

3 жыл бұрын

Thanks Shane and have fun with your new tool! I appreciate the sub! Thank you!

great video, thank you.

@BrandonLund

Жыл бұрын

Thank you!

Thanks! Bought s cheap plasma cutter off Amazon because I am drilling out some stainless metal boxes and was tired of burning out bits and how long it was taking. Getting the hang of it but the amp chart will be handy!

Good, informative video, cheers Graham

@BrandonLund

7 күн бұрын

Glad you enjoyed it thank you!

Thank you for your great lesson dammit that was great I just bought one but I haven’t started cutting yet due to not having any experience nor knowledge on what to do but now thanks to watching your a great teacher kudos brother now I have the knowledge and confidence to begin I like and subscribe to your channel for more lessons thanks oh yeah I’m going to look up that chart thanks again

@BrandonLund

2 жыл бұрын

Awesome man and thank your for the sub! Have fun brother!

Great video, as always! I never considered being able to knock down welds. Very cool!

@BrandonLund

3 жыл бұрын

Thanks buddy!

@MinionsSmithy

3 жыл бұрын

@@BrandonLund No, thank you, Sir! Lol!!!

Excellent illustration !!!!!

@BrandonLund

6 ай бұрын

Thank you!

Thank you so much from Down Under. You are a magic communicator.

@BrandonLund

2 ай бұрын

Wow, thank you! I appreciate that!

greatly appreciate this tutorial

@BrandonLund

Жыл бұрын

You bet!

Awesome! Still wrking on getting one..thanks

@BrandonLund

2 жыл бұрын

@Lucion Koinva that's awesome!

I had trouble seeing when arc welding so now I use a bright spot light aimed at my work piece and that’s helps a lot.

@BrandonLund

Жыл бұрын

Great point!

Thanks great video

@BrandonLund

6 ай бұрын

Your welcome! 👍

I love your vids, mate. Cheers from Sweden

@BrandonLund

10 ай бұрын

Thanks man! Appreciate it. Sweeden is my native country 👍 my great grandfather Andy Mattson moved to America and changed his name to Lund and everyone followed. Not sure if he changed it while in sweeden or when he arrived in America.

excellent thanks

@BrandonLund

Жыл бұрын

You are welcome!

Great video! I have a PrimeWeld Cut60 (great machine) and I'm new to plasma cutting. I have learned that I really suck at freehand cutting. I've been tempted to get a CNC table.

@BrandonLund

3 жыл бұрын

Thanks man! There is a small learning curve but keep at it. Freehand is hard for me too.

@JoeyGarcia

3 жыл бұрын

@@BrandonLund I try to use a straight edge as much as I can just like you showed. I'm going to get me a pair of tinted glasses like you mentioned.

Best tutorial!! Thank you sir!

@BrandonLund

3 жыл бұрын

Thank you! 😊👍

I have the PrimeWeld cut 50D...... your chart is awesome! Ty for the informative video......

@BrandonLund

3 жыл бұрын

Thanks Daniel I appreciate you watching and glad I could help!

Just getting ready to purchase a Hitbox Cut55 plasma cutter. Real good information thanks s bunch.

@BrandonLund

2 жыл бұрын

Thank you! @Schule's Guitar

Great video! You explain things very clearly and smoothly done with the having the Plasma guide on your FB Fan page cause that got you tons of followers including me🤘🏻

@BrandonLund

10 ай бұрын

Glad you enjoyed it! Thank you!

Excellent video...thanks much.

@BrandonLund

2 жыл бұрын

So nice of you. Thank you!

Great vid. Found the info about eye protection useful. New goggles ordered. Sub’d!!

@BrandonLund

2 жыл бұрын

Thanks for the sub! I appreciate it @Rob!

Thanks