Try my smart switches! We have both lights and 30a switches for high powered appliances www.seconds.cc

After watching you do all these stuff...I wanna upgrade my wife.

@madsncakes

3 жыл бұрын

🧐 hold that thought Let me delete my video

@stevepro7992

3 жыл бұрын

Couldn’t agree more

@ainarif107

3 жыл бұрын

HAHAHAHAHAHAHHAA

@diastan4195

3 жыл бұрын

Wahahaha. Just had to comment this comment 🤣🤣😂

@chiawildy563

3 жыл бұрын

@@madsncakes Video still available :D

So excited to share that I will launch my own smart home start up soon! 😎

Excellent videos, I watched the old and this one, excellent information about the switches, good to know there are 2 different ones :) Now I have a new project for my house, thanks again and keep it up!

@madsncakes

3 жыл бұрын

Both videos are the same... aqara non neutral wall switches. And the latest d1 wall switches triple gang

@acorchia

3 жыл бұрын

@@madsncakes Thanks MADS, I actually meant the wireless switch vs the switch you wire to the wall :) I thought it would've been a really great solution to actually change the switches, but didn't see that solution out in the regular places I shop. So thanks for bringing it out

@billyfoong8199

3 жыл бұрын

@@madsncakes hi there, does the latest D1 wall switches have the same installation method as your videos? i needed triple gang switches so i need to get the D1 version for my place.

Thanks for the video. It is very helpful. Have managed to install the Aqara D1 wall switch triple rockers without neutral. Fortunately, it works with my Philips Hue downlight.

@madsncakes

4 жыл бұрын

I just ordered the d1 too

@ninveulve

4 жыл бұрын

Hi both! I was just about to ask what recommendations there are if my switch is a triple switch and I saw Go Kuan Soon mentioning there is a triple rocker! Awesome but is there some where I can learn about the wiring for a triple rocker since MADS’ videos are all double rocker?

Thanks for making another video. Your videos gave me the confidence to install the switches in my home. However I have switched that are 3way and hope that Aqara will make a 3way switch in the future.

@madsncakes

4 жыл бұрын

do u mean 3 buttons? There’s one By aqara smart wall switch

@ulricng

4 жыл бұрын

Any idea where to get the 3 gang switch ?

@ghimchewyong4888

4 жыл бұрын

MADS hi, can you provide the link for the 3 buttons? Thanks

@liangliang4517

4 жыл бұрын

They just lunch the 3 way few months ago

@gokuansoon8626

4 жыл бұрын

Can get from Taobao 緮置这行话$gJdZ1LMlVyZ$转移至👉🍑宝👈或掂击鏈→接m.tb.cn/h.VQ4amx1?sm=a12735 至瀏..覽..噐【新品]绿米Aqara智能开关D1远程控制无线双控遥控开关面板智能家居】

Thanks for the super informative video. Can I ask why there are 2 wires that go to the L?

Hi Mads. I watched your previous installation video there were only 3 wires connecting to each L,L1 and L2. But this one got additional (total 2) wire connecting to L port? Can please share what's the difference? Thanks in advance

Hi great videos! Can I ask if you have smart switch for water heater? If yes, which smart switch did you get? Thanks

Hi there, thank you so much for sharing the idea on this in detail. Would you be able to share on the same thing but for 3 gangs instead? Thank you in advance.

Great! thanks for sharing, do you have one that shows installation of 2 ways and 2 rocker/gang ? most of my switches are 2 ways (i.e. two switches at two different location to control same light)

Hi Mads! Have you ever used Aqara switched for 3-tone lighs/lamps? How do you set it up in your Aqara switch/automation setup? Need your guidance! Thanks in advance!

The two rocker switch that I am trying to replace has the same layout configuration as yours. I was expecting one Live/hot wire coming from the MCB but there are actually two and interconnected exactly like yours.... I am wondering if anything need to be done to fasten those two wires before inserting into "L" socket of the Aqara switch.......

Hi, Excellent video! My room light swtich external push button, my contractor installed the small word "ON" look upside down, but the function is fine, may I know any problem with that? Should I ask my contractor to redo it?

Hi, wonderful and helpful video. Do you know if I replace one out of the two traditional switches of a 3 way with an aqara, both the aqara and the remaining traditional switch work as intended?

@madsncakes

4 жыл бұрын

Sorry I am not sure about 3 way...

Love your videos. Short and sweet. Need abit of help while I am planning for my smart home. When using Aqara Home app, which region do I choose? Currently there is no Singapore region and I do see "Other Region" as an option. Should I use that? Also in "Other Region" I did see Aqara wired wall switch. Can I pair it with aqara home app?

@madsncakes

4 жыл бұрын

Just A Cat Lover thanks! Yes have to choose China or other region

Does hdb bedroom ceiling light switch concealed wire route towards up/down/left/right of the switch? Thinking of drilling 2 holes near the switch to mount the aircon remote control holder, so just wanted to avoid drilling into the concealed light switch wire, should I mount on up/down/left/right of the switch? Thanks.

Thanks for the great video. So you also need an Aqara hub for this switch to work? I have seen some wireless switches that come in a pair and no hub is required. One will replace the traditional switch and the other can be placed anywhere to perform the same switching function like a 2 way switch.

Hi @mads i am trying to change one of my hdb 2 rocker wall switch to the aqara switch non neutral. Apparently i have 6 wires instead of 4. Not sure if u able to advise

Hey MADS, any tips or clue how I can turn a 1 gang switch (controlling ceiling light), to a 2 gang switch) Ceiling and Separate LED downlighting). PS: I am installing Aqara 2 gang no neutral switch. Thx a million

Hi Great vids! Do you think its possible to fire up the smart bulbs(such as Yeelight bulbs) or even turning it off with use of Mi/Aqara Motion Sensor without the need of changing the wall switch ?

@madsncakes

4 жыл бұрын

As long as it is in the xiaomi family and connected via app. It should be able to automate motion sensor > yeelights

Hi, can you please tell me the dimensions of the switch? I am planning to order a couple of them however in the meantime the junction boxes should be installed into the walls. Can you please tell me which size of junction box shall be used?

Hi Mads does aqara do switches that is able to adjust the brightness of the bulbs? (My bulbs are adjustable from 2000k to 3000k). Or can i adjust it from my aqara app?

Enjoyed your video. I have installed a 2 gang smart switch , but I can only get one of the lights to work. Any idea where my mistake may be. My old switch was identical in wiring to yours and I transferred the wires as you did.

@madsncakes

4 жыл бұрын

If the wirings are all correct, check the condition of the copper wires. If it looks burnt, trim the ends further in. Hope you understand what I meant.

Thank you life saver instruction!

Hi must you get the aqara hub for it? Or just the switch itself works witht the app already?😊

Hi, what is the purpose of inserting both 2 live wires together in L. Is it for a two way switch whereby you have another switch on the other side of your home that could control the same lights? Tia.

So with aqara if for some reason my wifi doesn’t work I still can turn off/on my lights from the aqara wall switch right?

Thank you for this video. If my lights aren't smart does the switch work ? Thanks again.

@madsncakes

4 жыл бұрын

PRG Line that’s the whole point. Smart switches will make normal lights smart

@prgline2106

4 жыл бұрын

@@madsncakes Thank you.

Great video and I’ve learn something from you. Correct me if I am wrong.I have the following setup 2 Xiaomi smart Leds connected to a E1 switch (2 gang no neutral line with just L, L1 and L2) which automation can’t turn on when the E1 is in OFF state. It only works when the E1 is in ON state. Am I missing something or is Neutral needed.

@madsncakes

2 жыл бұрын

Maybe different. Mine is the old kind of aqara which I removed it recently. I will be sharing my own smart home startup soon

Awesome demo I have question : is that possible to replace my current traditional 2-way switch with this smart switch? If possible, i must change both 2-way traditional switch? or i just need to change 1? (but I still would like to have both side physical switch functionable)

@madsncakes

2 жыл бұрын

possible with my upcoming new switch, but still recommend u change it to 1 way

Good afternoon. I want to buy an Aqara D1 circuit breaker (QBKG21LM without neutral, one key, wall mounted). I want to connect 5 MJTS01YL bulbs to it. But in the off state, the bulbs consume very little (less than 3 watts) and the switch will not work correctly. Its working range is 800W-3W Can you please tell me what you can buy for a load of 3W?

thanks for video, understand I well that status (on/off) should not be true if you combine manual and app controll switch ? I mean situation - light are on by the app, then you turn off lights by switch - does the app show lights still on or off ? If app changes status - how long it takes ? Thanks

@madsncakes

3 жыл бұрын

Sorry I removed my previous response as I thought u referred to the SwitchBot. Here’s the correct ans: No matter u on off it manually, it will detect the current state on the app but it takes time. Can be 2 secs. But i noticed it response faster with cellular compared to wifi.

Hi, i realise my switch socket only have 2 red wires, without the yellow-green wires. How do i install for that? hope you could advise please!

Great video. After seeing this video, I have better understanding of what to get for my next addiction 🤣. Btw, you are not using Mijia app but Aqara app instead for all ur devices. Anyway, you are such a handywoman but do take safety first. Kinda having cold sweat seeing u on the ladder changing ur ceiling lights...😅

@madsncakes

4 жыл бұрын

Melvin Tan i am using mijia app as it’s most convenient for me with all the sub brands like Viomi etc. The first few steps was scary then I got used to it. It’s my first time attempting ahhaha

@Kostas_SK

3 жыл бұрын

@@madsncakes Hi. is it working with Mi Home? or only with Aqara Home? I am using Xiaomi Hub Gateway v3

Hi can I check if you know the aqara switches work with Xiaomi hub V3? Many thanks

My double switch is for light and ceiling fan. Does it work with fan too

Hi, I like your videos. I'm considering smartifying some of my home too. How do I make the mi/aqara motion sensor work with a traditional light? Do I need to convert the light to the aqara smart switch before pairing it with the motion sensor (via the hub)? Thank you!

@madsncakes

4 жыл бұрын

Albert Liu thank u! If you wish to switch off the lights thru the motion sensor. Then yes u need to either change the lights or the lights switches to make it smart. Then automate it in the app

@awfullyalbert

4 жыл бұрын

@@madsncakes Thank you! One more thing: can you select what time the motion sensor come on and off via the app and hub? I do not need the motion sensor (and the lights) to come on during day time since it will be bright.

@madsncakes

4 жыл бұрын

Yes u can schedule

@awfullyalbert

4 жыл бұрын

@@madsncakes Great! Thanks for helping!

Can i know is there light indicator in the switch? If yes. What can it be adjust or how it function? When on the light is on or off?

Hi there, thank you for your video. Is there a way to link Universal IR with Aqara. Currently the Universal IR uses the Mi Home app and will not work with the Aqara app

@madsncakes

4 жыл бұрын

It does if u add aqara to China region. Both will link up.

Can the Aqara switch be used in automation to switch on/off non IOT light ?

Thanks for the great video on the smart switches. Does Aqara has five buttons switch?

@madsncakes

3 жыл бұрын

Felix Sim nope...

My current switch I have a com wire n L wire, does it mean the current switch com wire would go to aqara L n current switch L wire go to aqara L1 n L2?

Hi your both live you make it into one wire to connect to you aqara?

Hi Mads, good video. Can i know do u need electrician to do anything special in order for the smart switches to works? Or as simple as just like your diy?

@madsncakes

Жыл бұрын

Nothing special. Connect and setup

Great video, planning for HA. would like to check is the wall switches reliable. just worry about safety issue.

@madsncakes

3 жыл бұрын

Jy JY yep it is

@jyjy9234

3 жыл бұрын

@@madsncakes thanks for the fast reply.

Thanks for the video. I’m planning for a DIY convention after watching it. 1 of the main prob is I do not have a neutral wire installed in my current home and I’ve read that ur lights tend to spoil faster for smart switch with neutral. Have u faced similar issue so far ?

@madsncakes

3 жыл бұрын

No issues. Sg don’t use neutral for lights

I saw that you managed to control the 2 pendant lights with 1 wiring and also ceiling lights with only 1 wiring. How are those wired? are these daisy chained and run as 1 wire to the switch? Trying to understand the wiring things for my upcoming home as well to consider smart switch or smart lights instead...

@madsncakes

3 жыл бұрын

It’s hard to explain. If you need help - get an electrician who knows smart home stuff. Johnny +65 9010 9695

Question does the smart switch work with nonsmart bulbs?

Hi does the hub has to be near the switch? I thought the switch connected to the wifi and the hub could be placed anywhere in the house as long as it's connected to the wifi.

Hi I need your support. I want to use Aqara switches as a 2-way connection. 2-way - i mean a long hallway - with a light in the middle and 2 switches on both ends, so i can switch on and off the same lamp from both ends. I currently have an existing 2-way electrical installation with normal switches (non smart).

You are really smart to install all these on your own. Now I'm thinking about installing these on my own too but Aqara sells switches with neutral and non neutral. Which type should I buy? Anyone can advise me on this please? Million thanks.

@madsncakes

2 жыл бұрын

I will be coming up with my own switches soon. 😎

is no-neutral smart switch stable? I came across some comment on no-neutral switch being fragile and incompatible with some low power LED light. I am doing renovation to my resale HDB and I am thinking to put neutral wire to those switches.

@madsncakes

4 жыл бұрын

Seems ok with my 7 watt cob leds, 12w, t5s....

Recently I installed a Aqara Wall Switch (No Neutral). But I unable to connect with Xiaomi Gateway 3. It show not compatible. What shall I do? Any advice? I thought Xiaomi gateway 3 support zeebiz and Aqara switch support zeebiz as well.

can i know how to convert traditional 3 gang 2 way to one of the Aqara swtich?

Hi! @MADS, do you know of any switch for hdb wall light that do not require an extra hub or controller?

@madsncakes

4 жыл бұрын

Kevin Hong hmmm not aware...

@KS-jl3og

4 жыл бұрын

Smart Life Tuya Switch

I have a problem with my aqara switch. Whenever I try to change the light scene from my homekit/mihome, it will attempt to change scene and switch off my lights. Do you experience anything similar? :(

Hi, is it possible to disable a button during certain times or even better: assign a different function when pressed?

@madsncakes

3 жыл бұрын

I think you can set a time range for that function to work

Hey MADS. Just wanna check with you if your aqara hub coverage is enough for all the aqara smart switches without neutral? Planning to use the aqara smart switches but wondering if i would need a zigbee repeater for a 5 room bto?

@madsncakes

3 жыл бұрын

Nope! One is enough

@muhammadfirdhaus3767

3 жыл бұрын

@@madsncakes thank you!

hi MADS , nice information here , but I'm still wondering , can this switches or automation controlled by alexa ? for example I've installed smart switch open for night , and then ask alexa to turn off switch in the morning ? thanks before 👍

@madsncakes

4 жыл бұрын

Fenky Kwanz Aqara itself works with Alexa and google independently I never tried the automation on these ecosystems yet. I’m on Xiaomi and yes I could set it by timer, time delay etc

Huge thanks for this video! But just want to check that the Aqara Hub link in your description, the product reviews people indicated that it's a Mijia hub and not Aqara. Will that affect the pairing with Aqara smart switches?

@madsncakes

3 жыл бұрын

Apocsky Lim go for aqara hub with aqara switches :)

Hi! To prevent flickering, what’s the value of capacitor you added? Where did you get them? How do I connect it to the light? Thanks!

@madsncakes

3 жыл бұрын

For my place - I didn’t add any...

Can you share how to connect Z1 to dimmable LED using the dimmer function? My electrician says it can’t be done because the switch has neutral… please help…

hello, it is working with 110V to? or just 220v????

Hello! Nice video! Which smart hub do you recommend us to purchase? Xiaomi smart gateway?

@madsncakes

4 жыл бұрын

Thanks! I recommend aqara

Possible to share what type of switch for heater? Referring to smart switch

Hi I just got a Aqara two rockers model no neutral but there were no blue light. Checked there is L-240V incoming . Do you think it is broken? Aqara hub also cannot locate this switch. Thanks

@madsncakes

4 жыл бұрын

Did u hold down the buttons

This wall switch needs to connect to hub? Or can direct connect WiFi and control on app?

Which hub do u recommend? Was planning to get the Xiaomi automation hub but saw you were using the Aqara hub instead? Any difference?

@madsncakes

4 жыл бұрын

Try g2 camera hub. Best for value and performance qoo.tn/Bg6d7W/Q111280845

Hi Mads, all Aqara Wall Switch is require hub? i want to buy an Aqara Wall switch but i don't have an Aqara hub and can it work without a hub?

@madsncakes

3 жыл бұрын

Need hub

hello could you share a little more on this switch as i'm also thinking of buying the Aqara switches, but i have some doubts 1) any issues with the no neutral switches you are using so far? i understand that the longevity of the Aqara switches without neutral has reliability issues. From your first video over a year ago, are both switches running well till to date? 2) did you install a capacitor across your aqara switches to solve the flickering issue etc? or you went without a capacitors, no issues so far?

@madsncakes

4 жыл бұрын

EmptyHue hello there. so far ok. No capacitors. Occasional flicks (once 1-2 mth?) in the bathroom smd led but not on the T5. For my living room, no issues on cob led and aqara bulbs

hi I am re-wiring my resale hdb would you suggest if i should rewire with neutral wire...?? i heard it solve a lot of problem?

@madsncakes

3 жыл бұрын

Possible too!

Heya MADS, thanks for the video. I've been doing some research on the xiaomi smart home systems and I'm confused by the xiao mi home vs xiao mi aqara variants. it seems like the new xiao mi devices are all under aqara now and will be controlled by the aqara app? I'm wondering if the aqara gateway ans app syncs with google home as i've seen some forums saying they dont. Thanks

@madsncakes

4 жыл бұрын

Joel Soh aqara is part of the xiaomi eco system. So u could automate it with other devices in the xiaomi ecosystem. And few days back I managed to link from mihome to google home. Aqara itself has an app that you could link with google home too

@J0ELtheNOOB

4 жыл бұрын

@@madsncakes Okay got it. Thanks Mads, btw i have another question if you dont mind. Can i use these switches for my aircond and heater? I scoured the web trying to find an answer... I was hoping i could find a high amp version so that I can also repalce my air cond, heater, and oven switches.

@madsncakes

4 жыл бұрын

Joel Soh they have an ac plug but I don’t think it works for sg. But you could still control it with xiaomi universal ir. I have a video on it. (Now they updated to English) Heater switch shouldn’t be a prob, aqara single wall rocker. Oven, you could get a single relay controller or the xiaomi plug

Hey Mads, any issues with the aqara no neutral switches. There are many reports of the switches failing on hardware zone. Also can I ask if the lights you are connecting them to are all LEDs?

@madsncakes

4 жыл бұрын

Felix Kho the aqara switch itself no issues. It depends on the light. If u are referring to flickering, it could be resolved by adding a capacitor to the light. So far I’ve used COB LED, SMD LED, T5 and LED bulbs... SMD LED is the only light with minimal flickers

@alphaforsa

4 жыл бұрын

MADS how do you add capacitor to the bulb?

@madsncakes

4 жыл бұрын

I don’t know how... sorry!

Hai may i know what server are u using for mi home app.. Singapore or mainland China ?

@madsncakes

4 жыл бұрын

Saby Khan I’m using china

Hi, does aqara have 3 gang switches? I can't seem to find them online. Cheers.

@madsncakes

4 жыл бұрын

Have Try taobao or aliexpress

Nice work, well done 👍🏻 btw how many switches have you changed so far?

@madsncakes

4 жыл бұрын

This is my second wall switch ✌🏻

@just4therecord

4 жыл бұрын

MADS how come not all your switches. I think you will see more benefits if you have more.

@madsncakes

4 жыл бұрын

I would love to. But still thinking if I should move closer to my daughters’ school

Hi. I wanna change the water heater switch with none neutral aqara switch. Mine is different from ur switch. I hv brown with 2 L labelled. And neutral with blue.

@lemech

2 жыл бұрын

Cannot use this for heater switch. Load capacity is only 800W.

Hi, good video. Any idea usually, how many wires are there for wall sockets in Singapore? 3 (earth, live and neutral)? Since you are using Xiaomi just wondering if you know of any wall sockets (tempered glass surface, touch screen) that works with Xiaomi (Mijia). It will be good if it can work on a dual platform (with Tmall Genie). Thanks

@madsncakes

4 жыл бұрын

David Ho I only know for my type of housing.. no neutral. Not sure about tmall genie sorry!

@davidho6605

4 жыл бұрын

@@madsncakes Thanks for the reply. At least I know its no neutral. Just wondering if the no neutral is "by default" as in when u get your apartment (completely new) its like that or, its done through renovation (at least I have a basic gauge). Just want to confirm as many new apartments were built to be without neutral which is to cater for smart home as compared to the ones that were built earlier. Once again, many thanks for responding.

@madsncakes

4 жыл бұрын

No neutral by default in hdb... anyone pls correct me if I’m wrong :)

I bought 3 gangs switch. When i want to install, i saw there are 4 Live wires. What should I do and how to connect to that just one L

No use neutral? I see some switch come neutral? Ples explain me

For this switch... hub is required?

Hi, kindly check do you need neutral wire for this your smart switch

@cooliipie

11 ай бұрын

I also want to know...

can it be use by using android device and google assistant

Hi, very informative video there! Have u experienced the aqara switch not working even as traditional switch ( no blue light ) ?

@pearlynlee6408

3 жыл бұрын

When it was working fine initially then suddenly not anymore *

@madsncakes

3 жыл бұрын

@@pearlynlee6408 works ok for me! I used it for a very very long time. check the connection is correct and if a capacitor helps. one electrician who knows how to do this is Johnny 9010 9695

@pearlynlee6408

3 жыл бұрын

Thanks !!

Hello. I have existing sockets at home which i want to replace with Aqara D1. Was wondering are the mounts standard? I'm referring to the size and spacing of the two screws at the 6min mark. Thank you!

@madsncakes

3 жыл бұрын

It fits sg standard.

@penumbralle27

3 жыл бұрын

@@madsncakes cool thanks. hmm i noticed my plug has got 2x red wires leading into "Load" and then a blue wire. Does it mean that the "Load" are live wires and Blue one leads to my light? And that the "No Neutral" aqara will suit me? Thanks a lot!

@madsncakes

3 жыл бұрын

@@penumbralle27 no neutral suits all home. I am not qualified to give electrical advice

@penumbralle27

3 жыл бұрын

@@madsncakes I see. thanks a lot for the informative video :)

Do you know where can I find 3 gangs socket (without neutral)

@madsncakes

4 жыл бұрын

xyngfei taobao

HI MADS, great video! wanna ask. are all HDB units wall switch default comes with neutral wire?

@madsncakes

3 жыл бұрын

Nope, neutral not required in Singapore light switches

@johnmakaay101

3 жыл бұрын

@@madsncakes noted. Do i need to install capacitor on lights if go w/o neutral ar?

@madsncakes

3 жыл бұрын

Watch my latest aqara updates

using these aqara switches, since is constantly on wifi and on standby, doesnt it consume more electric in the end ? compare to traditional switches

@madsncakes

4 жыл бұрын

My bill seems ok

Hi MADs, i planning to install smart switch for my new house. Are you able to advise me the step and device that i need to have before installation?

@madsncakes

4 жыл бұрын

Darren Kam all u need is aqara hub and the switches. Install the hub first then follow this video. Rmb to switch off main power.

@Natrisa1819

4 жыл бұрын

@@madsncakes if staying at 2 storey floor, do i need extra few set of aqara hub to get the whole house connected?

@madsncakes

4 жыл бұрын

Darren Kam yup that will be ideal

Thank you 🙏🏼

awesome work! i am going to replace all the switches at home and now i think i can do it myself instead of sourcing it to contractor. however, may i know if Aqara hub is a must or the switch can be linked to google home directly??

@madsncakes

3 жыл бұрын

Yup need a hub... thru aqara home to google

@dmassg9216

3 жыл бұрын

@@madsncakes which aqara hub are you using?

I ordered an outsmart smart switch with no neutral. It comes with a capacitor and it says I must connect it to the very first light. Didn't really see or hear you mention about capacitor. Is it a must to install it?

@madsncakes

Жыл бұрын

Not a must.

@leelinshen

Жыл бұрын

@@madsncakes thanks for your reply. I have already installed the capacitor last week though.

Hi! Is there a difference between the wall switches from Aqara and Yeelight? Thx!!!!!!!!!!!

@madsncakes

3 жыл бұрын

Hoden123456 I never tried it so can’t comment

Yes, more clearer understanding. Finally I can install the aqara switches that are in my bomb shelter. So 2 wires marked with marker put to hole 1, 1 brown wire to hole 2. 1red wire to hole 3. 4 wires to 3 hole in Aqara Switch. Am I right?

@salvo56

4 жыл бұрын

I was wondering both live wire insert to one hole, is it okay? As in both live wire touching each other, is okay?

@madsncakes

4 жыл бұрын

Yup in my video, top 2 wires goes to first hole which is L on aqara Bottom wires goes to second and third L1 and L2 on aqara

@salvo56

4 жыл бұрын

MADS sorry, so many question... is your living room you install the Aqara, a 2 way switch?

@madsncakes

4 жыл бұрын

It’s 1 way with 2 buttons

@salvo56

4 жыл бұрын

MADS , do you happen to know if Taobao selling (2 way 2 button) version? Anyway, for everyone info, I accidentally insert a Live wire and Switch 2 wire into L (Live), another Live wire into L2 (Switch 2). Button 2 didn't worked and lucky the whole power box didn't trip.

Assuming you have 3 buttons old switch, can those wires merge to one of the 2 buttons of the smart switch if we can't find 3 buttons smart switch?

@madsncakes

3 жыл бұрын

Can if u know how... there’s 3 gang switch. Watch my latest aqara Video

Amazing

Hi MADS, tks for the video. After watching I bought this switch n lucky I watch ur video n bought the no neutral version. My hdb is 20+ yrs n my switch is not build into wall type. U knw any base plate in the market can fit? Also, do u hv 小爱同学？any issue controlling it w it?

@madsncakes

4 жыл бұрын

Welcome! Are u referring to something like this qoo.tn/BtETtW/Q111280845 Yes I have xiao ai. I usually just say xiao ai tong xue. kai teng. Seems to work perfectly. U can see more commands in app

@kianhongooi6905

4 жыл бұрын

@@madsncakes tks, will look into it.

Hi. I have a traditional 2 way 3 gang switch. Are there any 2 way smart switches from aqara?

@madsncakes

3 жыл бұрын

No u just need to route it correctly Check with this guy Johnny +65 9010 9695

@blackchalk205

3 жыл бұрын

@@madsncakes thank you.

I've the same switch and 2 different hubs and can't get it to connect to them