I'm still waiting on part 2 of surgilase. Congrats on all your recent successes!

I miss the old tear down videos! But I'm sure you are hammered with your new business congrats I watch the LTT video

The Linus video was well done, good on whoever thought to organize that.

The LTT vid got me to google "water cooled LED" which is where I found your channel and lo and behold.... PONIES. Can't say I'm surprized. There's a lot of techheads in the fandom. ...and why do I think of BronyCan when I look at your shirt?

Please make video on inverter microwave

Will work for machine shop and high speed camera access.

What happened to the air liquefier!!!

real shame since i never saw you guys there.

wish i was at blfc rn lol

I like the shirt

Got yourself a Robodrill?

Art tho still alive?

make more videos please ;)

BLFC? if only aha Either way my sony hd1000 only hits 240fps xD

+tesla500 Hi David, Can you tell us what could have possibly happened to the Hydraulic Press Channel's Chronos? It (or its tripod) was hit by some 'shrapnel', and recorded some glitches on the footage. The strange thing is, the glitches appeared BEFORE the hit. 6:17 kzread.info/dash/bejne/nImdj8SSdtjSZM4.htmlm17s Another viewer, Giovanni S suggested that the SD card socket became intermittent, which explains why the glitches appear before the impact (due to the processing time between the image sensor and the SD card). I told him it's not possible, because the Chronos isn't recording directly on the SD card. And I think a bad contact during writing data on an SD card would ruin the whole footage, even the filesystem of the card, or possibly the whole card physically. And for me, the glitches doesn't look like a broken video datastream. More likely image sensor data corruption (but that also seems to be impossible, because it wouldn't appear on the recording prior to the impact). I think a bad contact at the DDR sockets also isn't possible, because it would ruin the whole footage, or even freeze up the camera if it uses the same RAM for the OS, and it doesn't explains how the glitches appeared before the impact. What happens if the Chronos runs into some faulty memory addresses? It keeps recording, than it plays back, regardless of the corrupted memory contents? I can barely remember, but maybe you said something like that in one of your several years old videos, that the camera doesn't care what's inside the DRAM, it plays it back, it doesn't check the data integrity with CRC or any other method, to save processing resources. Am I remember correctly? Thank you in advance!

David, Great camera, I'm trying to buy one this week but need more pre-sales tech support, please have Tyler give you my contact info, he's being a faithful gate keeper

PLEASE READ!! PLEASE READ!! I just watched your electric turbo project! I was working on the same concept just before i had to travel. I am very glad i watched your video!!. I am able to provide a very crutial tip for cooling the running motor. Reply and i will share my experience!.

@tesla500

5 жыл бұрын

Nice, how'd you cool the motor?

@FirstLast-tx3yj

5 жыл бұрын

@@tesla500 what i did i that i fabricated a fan on the spinning shaft and as it spins it cools the engine behind it!. I also know how to help you reach your target boost which should be around 6 psi. With your huge turbo thats noticble horsepower when mounted on application. I can also have a design that i didnt have the chance to try out that helps u reach 1 bar of boost. Theoratically it is 100% correct, but didnt have the chance to try it

@FirstLast-tx3yj

5 жыл бұрын

@@tesla500 it takes more that a youtube comment if you are serious about it we can have a proper converstation on email or skype. The electric turbo charging is something ive been having in my head for several years i connot sharr everything here. I would be glad to discuss this with you because you cannot make it without overcoming these hurdles

@FirstLast-tx3yj

5 жыл бұрын

@@tesla500 i would like you share the specs of your final setup like pulleys motor and batteries. Ur boost measurment is not very accurate too. Ill give u more ideas. Looking forward to better way of contact.

AwRooOoooooo!

@Ice_Karma

6 жыл бұрын

Don't awoo, $350 penalty. ;3

@shocksplash6856

6 жыл бұрын

KooriShukuen no, it got legalized in Canada!

@shocksplash6856

6 жыл бұрын

KooriShukuen am not sure if you need a awoo card though, *awooos anyways*

linus tech tio Baa, disgusting. dont waste your time with such an repulsive media company.

@altaroffire56

6 жыл бұрын

Why not? LTT has a lot of audience, and the video they did does a good job of showing how awesome Krontech and the Chronos camera are.

@alfoncejean8826

6 жыл бұрын

Jose the guy (linus) is an idiot he is at best pointsless and about everything he reviews is either misrepresented or just trash. Chronos is a real products it should not has itself polluted by scam artist like linus and Co.

@bluefoxtv1566

6 жыл бұрын

It's free and easy advertising. As long as he doesn't get involved with LMG anymore then that he is good.

@alfoncejean8826

6 жыл бұрын

BlueFoxTV Linus has good views !!!! serously that the only argument? You know what trump has good views, so dose putin , Kim Jong ill or the fuking pope. Something you don't actually want publicity from some people, they will just damage your respectability. Although I would love to see a Kronos advertisement done by the Pope . He could talk about all the merit of having easy to use and very portable high speed camera. All of that will be very helpful to capture those "special" moments with the youngs of their congregation. I am of course talking about that blessed moment where guided by the experience of their local prist the younger generation get to experience the overwhelming moment of their personal discovery of the flowing fait for whith themselves.

@diegodoumecq5144

6 жыл бұрын

I see, so you hate popular things because they do stuff to become/stay popular. Gotcha.