Took me hours to get this right. It’s exactly what you said about everything being in sync when adjusting these clippers. You have to find your way around. Every t outliner is different I have 4 more to do.... 🤦‍♂️

Audience, Great job Sir. You've explained in good details...

Dude, right on! thank you for explaining it straight forward and thorough!

@cloudsdiamondsharpening3973

8 жыл бұрын

you are welcome. I'm glad I helped. thanks for watching

Thanx. This was really helpful. Im gonna try this out when I get to work tomorrow. keep doing what youre doing. This is the most informative video ive seen and ive been looking for a while.

@cloudsdiamondsharpening3973

6 жыл бұрын

Nikki Ro np. I'm glad it could help you. Thank you for watching

Excelente video bro! i will try it in my andis gtx! keep doing it u are good!

Thanks finally solved my loud noise problem

@cloudsdiamondsharpening3973

Жыл бұрын

Thanks for watching

Damn bro u really good at this lol. Respect ✊

@cloudsdiamondsharpening3973

6 жыл бұрын

armando moreno thank you and thank you for watching. 😊

A big help

Thanks so much

Nice video.. Very informatif 🙏🙏👍

@cloudsdiamondsharpening3973

3 жыл бұрын

Thank you and thank you for watching

saludos,ala andis gtx también se puede hacer esos ajustes,como aflojar esos tornillos como indica la flecha en el vídeo.

Your AWESOME DUDE 👌

@cloudsdiamondsharpening3973

Жыл бұрын

Hello. Thank you. And you're awesome for watching. Have a nice day

Thank you!

@cloudsdiamondsharpening3973

Жыл бұрын

Thanks for watching!

Thanks!!!!

@cloudsdiamondsharpening3973

6 жыл бұрын

k fro np. Thanks for watching.

Great vid and channel! question...i notice the newer andis trimmers are lacking those 2 screws with the bolt. its two flushed screws now. how do you adjust the arm now?

@cloudsdiamondsharpening3973

8 жыл бұрын

I have not seen a new one because they are all still in warranty. To be honest you can not even use those 2 screws and just use the nut to hold in place. The 2 screws just help but if they are gone now, they probably just rivet it on. Thanks for watching and i hope i answered your question correctly.

Great Video! What if you turn on your Trimmer and it doesn't turn right? Sometimes it's on the manufacturer. I use WD 40.

@cloudsdiamondsharpening3973

6 жыл бұрын

joecool97 hello. Thanks. Send back for warranty if it doesn't turn right. Thanks for watching.

my t outliners would turn on, but after a while of using it, it turns off by itself. I would then let it sit for a while unplugged, and I'll give it a go and its up and running. But it does the same thing of shutting off by itself again while I use it, this gets me very upset because I don't know how to fix it and there is no tutorials to fix this on Google or KZread and I figured you were the perfect person to ask after watching this video.

@cloudsdiamondsharpening3973

8 жыл бұрын

The cord has a short in it or the blade needs oil.

Thank you, so much man! I will be in the shop today and will try my best to do the exact same thing! I've never had a great youtuber with such knowledge to do a requested video for me. I'll give you a update once I try this! Honestly, thanks again. What's your instagram or Facebook?

@nickgeorge1674

8 жыл бұрын

+Preston Henderson facebook.com/cloudsdiamondsharpening/ instagram.com/cloudsdiamondsharpening/ You are welcome, i hope it helps.

@cloudsdiamondsharpening3973

8 жыл бұрын

+Preston Henderson instagram.com/cloudsdiamondsharpening/ facebook.com/cloudsdiamondsharpening/

Just bought some blackout Andis T Outliners. Instead of the 2 screws at the bottom, they're flat rivets. To move the armature, you need to take those out. Any idea on how to take them out?

@cloudsdiamondsharpening3973

7 жыл бұрын

Alan Q you shouldn't have to remove or adjust. I recommend sending back for warranty. but i adjust them with the center bolt.

I have a question, I have a regular grey T-Outliner and a GTX that I got sharpened and serviced. They were solid for a couple of weeks, then all of the sudden they seemed to loose a lot of power to the point where the blade isn’t even moving. I spray it down and oil it and runs really good with power for a little and then does the same thing? What’s the solutions for them? How long do outliners last, or do they ever get bad.

@cloudsdiamondsharpening3973

6 жыл бұрын

hello. It sounds like the blade is dull. Blades go dull and need to be resharpened or the trimmer needs to be readjusted. I recommend having multiple blades. The trimmer can always be fixed.

hey, love your videos! i adjusted my newly sharpened blades, and they are cutting, but they are pulling bad. what did i do? thanks!!!!

@cloudsdiamondsharpening3973

8 жыл бұрын

+Jessica Martin Thanks. Im glad you enjoyed. why did you have to adjust newly sharpened blades? It could be that your clippers tension is to loose to hold the blade together.

@jessicamartin4672

8 жыл бұрын

I had dropped them and chipped the blade so i got a new one, put it on and it wouldn't cut, finally got them to cut, but now they are just pulling pretty bad. I will try and tighten the tension. I also bagged it into the case, and bent the arms just a little like you showed. Thanks again! !

@cloudsdiamondsharpening3973

8 жыл бұрын

+Jessica Martin Alot of new blades are not very sharp. I call it factory sharp bc a machine sharpens them and where i once worked, customers buy new blades and then have me sharpen them out of the package. It could just simply need to be sharpened. Or when you dropped you might have bent something. Well good luck and hope i help you figure out your problem.

@cloudsdiamondsharpening3973

7 жыл бұрын

Jessica Martin NP and thanks for watching

Factory position sucked on my new GTX t's!

@cloudsdiamondsharpening3973

7 жыл бұрын

pnojazz you'll have to adjust them or send back for warranty.

How did you solve the noisy problem? This trimmer works very very loud!

@cloudsdiamondsharpening3973

3 жыл бұрын

Adjust them with the with the ball of the fork at the upper part of the cutter. With 2 pounds of pressure and if that does not fix the noice it'll need to be sharpened to resurface it and put the correct pattern to insure it to cut correctly. Thank you watching

if the tension spring was bent due to a fall, then bent back, is it still possible to adjust the clipper? or do you need to purchase a new tension spring

@cloudsdiamondsharpening3973

6 жыл бұрын

callmetagno you can adjust it if it's not broken. The spring is no longer available. So if the spring is broken you will have to order the armature.

@callmetagno

6 жыл бұрын

appreciate it, the spring is not broken i got the clippers about a month ago so i'm gonna try to adjust it myself. Thanks again, vids are great

@callmetagno

6 жыл бұрын

was able to adjust the spring and find the right tension. works perfectly now. Thanks!

I just bought some new liners and they only have the nut in the middle where the 2 screws are is circular metal pieces

@cloudsdiamondsharpening3973

8 жыл бұрын

+adrian haynes I'm sorry, I don't understand. The two screws that hold blade fork are riveted instead of screws?

@AdrianHaynes619

8 жыл бұрын

+Cloud's Diamond Sharpening yes

@cloudsdiamondsharpening3973

8 жыл бұрын

+adrian haynes Interesting. Thanks for telling me.

@AdrianHaynes619

8 жыл бұрын

+Cloud's Diamond Sharpening yeah no problem I guess adjusting the arm is a one nut move now

@cloudsdiamondsharpening3973

8 жыл бұрын

+adrian haynes Ya. Now if the fork gets bent to bad or broken it cant be replaced but you still can replace the whole armature with that piece riveted on.

I'm trying to decide between an Andis T-outliner VS. Andis superliner which one you choose for balding and line ups?

@cloudsdiamondsharpening3973

7 жыл бұрын

Rio hello, the superliners have a rotary motor. That's good for power but there are no parts available. The blades of the super liner are on a guide that pivots so you can't adjust them with ease. The metal of the superliners blade is softer so it might not stay sharp as long. The outliners are adjusted easier and have all parts available thru the manufacturer. So I pick the Andis G Outliners for quality and parts availability But I'm also not a barber. I hope I helped and thanks for watching.

@Rio-uv1gs

7 жыл бұрын

Cloud's Diamond Sharpening nice..thanx...I asked a barber and he said the same thing from a cosmetic stand point the Andis T outliner is better. Appreciate it man...Im about to buy it do you think buying it brand new that it would need adjusting?..if i wanted my liner done like the one in your video do you help out Canadians. Lol?

@cloudsdiamondsharpening3973

7 жыл бұрын

Rio I can do it. But it will be alot in shipping. For better details please visit www.diamondedge2015.com

@Rio-uv1gs

7 жыл бұрын

Cloud's Diamond Sharpening ok cool thx

What about the newer GTX? They don't have screws to adjust the armature.

@cloudsdiamondsharpening3973

7 жыл бұрын

Poker Face you shouldn't need to adjust the armature but the middle bolt should adjust it. I usually never adjust an armature unless someone messes with it. unless it makes a rattle sound going into hair is the only reason to adjust it.

@pokerface5070

7 жыл бұрын

Cloud's Diamond Sharpening Thanx

won't the corners of the blade cut client if you move arm too much too on side

@cloudsdiamondsharpening3973

8 жыл бұрын

+adrian haynes Yes it will. If the teeth go over the comb. This was an armature video Not fixing the tension fork, that is what it says in the description. Do you need to know how to adjust the blade?

@AdrianHaynes619

8 жыл бұрын

+Cloud's Diamond Sharpening I was talking about the cutting blade if you move the arm to much one way the cutting blade won't be center with comb blade anymore cause cutting if you use the corner of the blade to go around the ear or neck area??

@cloudsdiamondsharpening3973

8 жыл бұрын

adrian haynes Yes it can if the cutter blade is too far over. You can loosen the blade screws and slide it over to where that cutter doesnt go over the comb. If you cant adjust it good enough by moving the blade then you will need to adjust the tension fork.

@AdrianHaynes619

8 жыл бұрын

+Cloud's Diamond Sharpening OK thanks for everything

I did my adjustments but my tension screw touches the bottom of the neck so it's scrapping for some reason as if the screw is too long... any ideas on why that could be?

@cloudsdiamondsharpening3973

7 жыл бұрын

Isaiah Sims Hi. its probably BC your fork is bent. you will have to buy a new one or bend the fork pad up to be able to back the tension off. the flat part of the fork where the tension screw goes in needs to be bent up.

@isaiahsims3080

7 жыл бұрын

Cloud's Diamond Sharpening yeaa man that's what I was thinking, buying some new trimmers but imma try to adjust the pad some more and see how it goes

@cloudsdiamondsharpening3973

7 жыл бұрын

Isaiah Sims I might have a video to help you. here's one but I have more look through my videos. kzread.info/dash/bejne/fZd8rZVwe7e5ocY.html

@isaiahsims3080

7 жыл бұрын

Cloud's Diamond Sharpening thanx imma check it out

Why does mine shoot sparks after I turn it off and it’s hot

@cloudsdiamondsharpening3973

3 жыл бұрын

I can't tell you without looking at it but I wouldn't use it. It's unsafe. An outliner shouldn't get hot, maybe just warm.

do you still adjust andis trimmers

@cloudsdiamondsharpening3973

Жыл бұрын

Of course!

hey do u sell modified t outliners? like maybe in ebay?

@cloudsdiamondsharpening3973

7 жыл бұрын

Jek Lee no sorry but you can buy one and I can modify for you.

Have you work for the Andis company in Racine Wisconsin on Route 20

@cloudsdiamondsharpening3973

5 жыл бұрын

No but I worked for a Andis service center for 16 years

@williebgoodtoot

5 жыл бұрын

@@cloudsdiamondsharpening3973 it seems to me that you know your s*** about blades and repairing of Clippers. Yeah I used to live in the Milwaukee area and out of curiosity I drove by the Racine headquarters of Andis. Great videos

@cloudsdiamondsharpening3973

5 жыл бұрын

Np. Im glad you enjoyed my videos. That must have been cool to see the andis factory. 😁 Thank for watching

@williebgoodtoot

5 жыл бұрын

@@cloudsdiamondsharpening3973 well actually it was just a drive-by sir

Do you still sharpen blades

@cloudsdiamondsharpening3973

6 жыл бұрын

Hello. Yes I do.

Do you zero gab the clippers too

@cloudsdiamondsharpening3973

6 жыл бұрын

Alyssa Llanas I set them correctly. I do not set them to leave razor burn or bumps.

@wick3done1

6 жыл бұрын

Ok thanks will check it out do you do modified blades to r no

@cloudsdiamondsharpening3973

6 жыл бұрын

Np. No i am sorry. i do not modify blades

My arm has only the middle screw the end two look like rivets

@cloudsdiamondsharpening3973

7 жыл бұрын

atardy12 there is rivets now on the new style outliner.

@atardy12

7 жыл бұрын

Cloud's Diamond Sharpening Oh, my top blade where you set the half moon seems for left. Is that normal?

@cloudsdiamondsharpening3973

7 жыл бұрын

atardy12 try to loosen the blade from the trimmer and slide it over until the cutter is in the middle of the comb blade. unless the trimmer is making a loud hitting sound or weak, you shouldn't need to adjust the armature.

@atardy12

7 жыл бұрын

Cloud's Diamond Sharpening thanks for the quick response. Great video

I love your videos. But you should use a nut driver to loosen that nut instead of those pliers. You know your stuff and seem to do good work. Why not use right tool for the type fastener and look like the pro you are.

@cloudsdiamondsharpening3973

8 жыл бұрын

Well thank you. I don't use a nut driver because this was a requested video and i do these for free. Then have to edit it and still keep up with my real work. Plus i was helping someone that probably don't have a nut driver and everyone has a pair of pliers. But thanks for watching and have a nice day.

i wonder if i can make a tattoo gun on it

@cloudsdiamondsharpening3973

7 жыл бұрын

I'm sure of it. Might be awkward to hold BC it will be a bigger Field. More power but it be heavy.

@nhoreslama8602

7 жыл бұрын

Haha it have the same part on tattoo gun maybe just make a frame 😁 but nice video on there

@cloudsdiamondsharpening3973

7 жыл бұрын

Thanks and thanks for watching.