Seeing that freewheel brings back memories for me. Threading the freewheel on the hub was so easy. Sometimes lining up cassette cogs on a particular freehub body is not always as easy. I think you should do a video on Campy cassettes and freehubs.

@JoeyMesa

3 жыл бұрын

Thanks! I appreciate your feedback and I'll try to do a Campy specific version soon!

Joey, I've reviewed this video several times and I recognize and learn something more each time. This time, I picked up on the detail of the size of the largest cog and why it's important. I run a Dura Ace 53/39 chainrings to a 9 speed 11/28 cassette. New bike to me, (Trek 5900) but I planned, going in the purchase to change both the cassette and chainring configuration. Probably go to 11 or 12 to 34 on the rear and yet to be determined on the front. I live in the Hocking Hills in Ohio (hilly), and betting I discover the 50/34 is the right change. Thanks for the very detailed and clear explanation.

I had a Sram 25/12 10 speed cassette. I was able to run it on a 11 speed hub with no spacer. When i swapped it for a Ultegra 28/11 10 speed cassette i had to use a spacer. I found it so odd. But then i realized they had the same amount of cogs. But the spacing is different. When running the Sram i experienced noise from the chain rubbing because the cogs were closer together. But the Shimano is much smoother and absolutely no noise. Very good point that you touched on about that. Great video.

@JoeyMesa

11 ай бұрын

Thanks!

Great video,What would you recomend for hub dimensions for old Peugeot aubisque from 90s Thank you so much

The amateur bike mechanic that I am thanks you for these useful infos! Be safe Joey!

@JoeyMesa

3 жыл бұрын

Thanks, you too!

I love your videos. I think I’m more confused now lol 😂. I have a Sora on my road bike. 9 speed. I noticed there are no spacers on the hub. The cassette goes straight into the hub. The shifting is ok but no matter what I do the shifting is never very clean and smooth. Do you think I might be missing a spacer in order to get the cassette lined up properly? Thank you

Hey Joey, great video! Happy early birthday!

@JoeyMesa

3 жыл бұрын

Thank you so much 🤗

Great info. Thanks

@JoeyMesa

3 жыл бұрын

You're welcome! Thanks for taking the time to leave feedback!

Again, very informative. Thanks Joey! Overall, which one do you prefer: Sram or Shimano?

@JoeyMesa

Жыл бұрын

You're very welcome Denis! I've got Sram and Shimano on various bikes I have, and they're both good. I'd say long term, as in 15 years or so, I've had better luck with Sram components, but honestly, I'm not too picky when it comes to choosing one over the other. Thanks for the question!

@denis_roy_7

Жыл бұрын

@@JoeyMesa Thank you!

Im thinking of getting the HF welding table fir $70. Think its good enough fir bike frame welding?

@JoeyMesa

3 жыл бұрын

5 or so years ago, I was contemplating the same thing. I ended up just building my own welding table. It worked out well and have built a couple of frames plus numerous other projects on it. The HF table seems like a good option for taking to a job site, but maybe a little too light to build a frame on? Honestly I'm not sure because I haven't tried it. The price is right on the HF table though!

My son has autism he is 15 now and refuse to pedal his bicycle smaller bicycle the rear wheel move the pedal bigger bicycle you can stop the pedals while the wheel spin. Can I convert this so that the pedal turns only when the rear wheel turns ?

informational vid, no doubt, but I call foul on title 8) what I need to know, not being a cyclist, is how to reverse the freewheel direction on a shimano hyperglide unit. I'm using it to drive the reel action of a tarp roller and need both ends of my 16 foot span to roll up evenly, yet freewheel when I'm deploying the tarp. It's being driven by a chain on each end by a shaft that spans to drive both ends together (hopefully resulting in a good straight roll without coning or cupping on either end).

Thank you

@JoeyMesa

3 жыл бұрын

You're welcome!

Merci!

@JoeyMesa

Жыл бұрын

Thanks so much Denis!!! I really appreciate you!!!

@denis_roy_7

Жыл бұрын

@@JoeyMesa And I appreciate your proficiency and knowledge. Those are priceless Joey.

Better call Saul ..

Hello.can i connect with you in facebook.whatsapp.i am interest about cycle

@JoeyMesa

Жыл бұрын

No. If you have questions, ask them on any of my videos in the comments section.