Thanks for the memories! I had examples of each chassis, with bodies, until I turned 18 and my mom cleaned out the basement and threw them all in the trash. I'm still angry.

wow really informative... luvit!!! you are great brother!!!

thanks for the info jc and the track does not run brakes but each lanes have its own power supply

Love the videos it reminds me of all the fun in slot cars.i didn’t realize how much I missed it.

before the tyco 440x2 was the 440. it had the single bar magnet between the motor and the rear axle, and all other parts will exchange with the x2. it was the one used in the tyco 440 championship races held by tyco all over the country. hobby shops had the exact same track layout, and the timed events were all compared.

@kevynbrownell719

4 жыл бұрын

Called the Magnum.

Awesome information! Thank you for this video. I'm trying to research my way back into slot cars again after 30 plus years. So this info you provided was very helpful

@slotcarcrazy

7 жыл бұрын

+Scott Smith I'm glad this video could help thank you for watching

@ki4dmh

7 жыл бұрын

slotcar crazy, I've submitted a request to your fb group but not been accepted yet. Could you check that out for me. I just ordered some parts to get my old slots back up to stock running. Again, thanks for the info

@slotcarcrazy

7 жыл бұрын

+Scott Smith will do Scott

Hi thankyou for the AFX info. I was browsing auctions and saw a Tomy Aurora AFX Ghost Racer Slot Car. I think it looks like a super G+ car. But not exactly and in some ways it looks like a Tyco 440x2 car. I found it SRT Turbo Chassis.

the 1st tyco chassis is a tyco S not a tycopro, tyco S was competitive to the aurora tjet chassis, the tycopro was in competition with the non mag. afx

Very informative, thanks!

Cool I found you! I have always loved Aurora AF/X, We use to have a hobby shop up town, well we still have it but it since moved. G&G Hobbies use to have a Factory Fiberglass Aurora 8 lane track, another Aurora Model Motoring public track made with Home track pieces made into 8 lanes and I use to go up there every weekend to \watch the guys race, They also had a 1/24thg scale 8 lane hill climb. My first cars ever were Aurora Vibrators, then came Thunder Jets and Tuff Ones, then regular AF/X, Magnatraction, Specialties, Aurora Xlerators, Power Passers, Tyco Pros with White Shoes and the verious tyco and newer Aurora products. I also have some Amerac slot cars when they came with speed certificates and a few after the company was sold. I have Parma controllers and a NOS still in the package early 1970's Parma Tiger film can controller! I have a butt load of stuff, model motoring and speed lok track original Aurora, Metal Model Motoring loop to loops, thumb controllers and steering wheel speedo type controllers, I even have a lexan body non magna traction AF/X car packaged for racing with a brass pan. I use to do business with HO Sherm who use to be Connecticut but passed away back in the early 80's He had everything, After market with high power magnets to high timed armatures and different windings, he had kits, bodies! He sold everything from Atlas and Aurora (he sold Tuff Ones for $2.50 with Red Devils, and he had a special on Good Humor Ice Cream Truck thunder Jets at a $1.95 a piece) and Auto World. I haven't done anything with 1/87th scale in a long time and its been 15 years since i did any 1/32 and 1/24th hill climb and Drag Racing! Did I mention I love love love Slot Cars!!! :)

@QUICKSILVERappletree

8 жыл бұрын

When Aurora went under, they were selling AF/X car parts by the mixed bags full for something like $5 a shot, for magna traction, regular and G-Plus! you would get enough parts in each bag to build 3 cars and have extra pick ups springs commutators and brushes to fill your pit kit and drawers! it was both an exciting time to get AF/X and a sad time to see Aurora disappear

@slotcarcrazy

8 жыл бұрын

+Hunter RedBlood thats cool hunter I'm glade u found the channel

@QUICKSILVERappletree

8 жыл бұрын

ok I did a little checking, some of the cars I have are AmRac, Rokar and Life Like. That is also the order the company started, moved too then finally became. If you don't have it here is a good looking source for you to check out: www.slotcarcentral.com And one more thing, along with HO Sherm and Auto World I also dealt with Scale Auto

After the Tycopros you had two versions of the Curve Huggers. You had the HP chassis, the differnt versions you showed, and then the HP2 version. The HP2's had two magnets in front of the rear wheels similar the the 440X2 but of course you had the can motor like the HP chassis.

I grew up on Tomy's Turbo chassis. I still have a variety of these from those days. I tried a couple of Mega Gs, in both long and short configurations, liked them for a bit, but I hate them now. I love how forgiving those single bar magnets are compared to the split neodymium magnets found in anything afterwards. I also have a couple of Autoworld chassis with the traction magnets pushed out of them, for a bit of a challenge. It's given me the bug to buy a full set (4 cars, to suit my track) of T-jets. Disappointingly, tune-up kits for the Turbo chassis skyrocketed in recent years for $17.50 (New Zealand Dollars) per kit, only to be discontinued here soon after. A quick browse on the interwebs and I can't find them for love nor money unless the shipping costs are horrific. My biggest fear is that since the Turbo chassis wasn't anything special compared to the Super G+, 440x2, or any other chassis from the golden age of slot car racing, the humble turbo chassis will disappear all together sooner than any other, even if some SRT parts are interchangable.

@slotcarcrazy

6 жыл бұрын

+Alex Paulsen I'm sorry it's so hard for your guys downunder to get parts it sucks

@jeffnorbert1871

2 жыл бұрын

For anyone reading years later, any parts you need for the Turbo chassis is readily available from dozens of sources. Further, an updated version of the chassis is being produced by Bulldog Racing. Tuneup "kits" made by Tomy are not so easy to find but they are a waste of money anyway aside from possibly being collectable.

I believe that the first Tyco Pro that You showed, with the button pick- up shoes with springs Chassis was actually a Tyco Pro II with the wiper style Chassis being The Original Tyco Pro.

So you have a video to identify ideal chassis? I have 2 ideal slot cars from 1981 and need tires but don't know what to buy.

Blazing breaks has a differant crown gear setup than the speed shift. Speed shift can go both directions.

Thanks found this video very informotive

The Aurora blazen brakes have a slip clutch drive gear instead of the 2 speed gear set up.

Awesome video for me to learn

Awesome! Thank you, that was very helpful. I just got the new AFX Super coupes to get back into slot cars after many years. So I have two of the new Mega G+ chassis. Way back in 1982 I had Tyco stuff and HP7's. I see there has been quite a bit since. I've been catching up on the internet and this seems to be a great primer. I see BSRT makes a lot of stuff for Mega G, but I'm looking forward to see what you can throw at the Mega G+. I'm also curious, all the previous Tomy pickup shoes are interchangeable, will the Mega G fit the Mega G+, or any other parts? Thanks.

@slotcarcrazy

8 жыл бұрын

No the mega G+and megaG pickup shoes are not in inter changable.glade to see someone getting back into the hobby alot has changed since 1982 have fun and keep on racing

Good Stuff! Thank you SIr

Troy I make the pickup shoes for the tyco HP HP2 curve huggers.

Good video! Thx👍🏁

Early Tyco chassis omitted from video - Tyco S. Similar scale to T-Jet Marchon is NOT LifeLike related! Early LifeLike was Amrac then became Rokar then much later LifeLike. Nice looking track set-up; hope you are running brakes and separated for each lane.

You do a good job. I'm not as good in front of my camera. LOL.

HP7 found it. I needed pick up shoes. Great info!

do you need a set of pickups for the TYCO curvehugger?

just wondering if you could help me with a car i bought. i have some afx flamethrower cars and all the chassis have a blub non mounted bulb that slides into the headlight lens. on the ferrari 512 i bought the bulb is in a clip on the armature and the lens has no place to slide in a bulb. is this correct?

@jeffnorbert1871

2 жыл бұрын

Yes

Hi troy, question for you. Will the speed shift and blazing brakes chassis run on a regular track? Thx

@jeffnorbert1871

2 жыл бұрын

Yes, but to operate the special features you need a special controller. The cars run fine with a normal controller.

on the Mega G-Plus car why and what is the circuit board used for? thanks, Dean

@jeffnorbert1871

2 жыл бұрын

To prevent radio frequency interference. Can't be imported to the USA without out.

SG+ traction magnets with dots are polymer. No dots not as strong, not polymer, ceramic I think.

Track layout is good but theres too many blind spots because of the buildings.

Jeff use the same techniques as you would use your EZ off

BSRT chassis SRT chassis Super G chassis and Tyco 440x2

I know it's an older video but i have a couple that look really old but have steerable front wheels

@MrBonger88

5 жыл бұрын

Could be AFX Screeechers Magna-Steering

Aurora #1 I have Tyco,Riggen,Amrac,Lifelike,Tomy but the Aurora line has the best quality.

Informative video! Thanks! I have been out of the loop with slot cars in a long time. Question, Will any of these cars run on an AFX track that i'm looking to buy from afxracing.com?

@slotcarcrazy

8 жыл бұрын

Yes all will work.have a fun time this is a great hobby

@sid479

8 жыл бұрын

Thanks for the prompt reply!

Please hold the cars still and not shake them so we can see them.

Hi, I was hoping you might know if I can snap an Mega g or MG + chassis onto a Autoworld X~Traction body ❓❓I like the variety Autoworld has in their many body styles but ,,,,,, that X~Traction motor is problematic. Thank You ,,,, Mike

@slotcarcrazy

8 жыл бұрын

+Mike Remvidas you can if u use the short chassis with the body clip I try it and it works don't know if the mg+ has a short the one I have is a long chassis hope this helps

@MikeRemvidas

8 жыл бұрын

+slotcar crazy 🏁🏁🏁Yes,, that's the answer I wanted to hear Thank You !! Killer job on the slot layout 🏁🏁🏁 Thanks once again

what about the super2?

I think Tchassis faster for lifelike . And M chassis parts supply dwindling fast

@jeffnorbert1871

Жыл бұрын

Any parts you need for the M chassis are plentiful and easy to find. Harden Creek Slots bought what remained of the Lifelike brand and they are even producing brand new parts. Seems like people are consistently looking in the wrong places for whatever they need.

Man I'm behind the times,this video is 6 years old.wake me up,ha..

I put a brand new motor in a tomy turbo chassis and it won't move. What could be the problem

@slotcarcrazy

3 жыл бұрын

The connection on the motor may not be making contact with the pickup shoe holders check that first

Florida here friend

Tyco "S" chassis is before Tycopro I believe.

@jeffnorbert1871

2 жыл бұрын

Yes

You forgot about the Super ll

What type chassis came with the original Thunderloop Thriller

@slotcarcrazy

2 жыл бұрын

I think they were tomy turbo's

@damiencerutti6269

2 жыл бұрын

@@slotcarcrazy thanks mate. Just bought a complete Thunderloop Thriller with original box, original cars and manual for $50 AUD. Can’t wait to give it a spin. Can you still buy the old Tune up Kits for these cars?

The double magnet one is a HP5

Amrac and Rokar before Lifelike. Thought you had an Amrac.

Forgot Tyco Curve hugger.

what do the MG+ look like?

@slotcarcrazy

7 жыл бұрын

+Ken Jencks if u go to the picture albums on the group page there is pictures of all the chassis I have are there

Wow. I was looking forward to learning the different chassis. But by 3.5 minutes in I was so furious I couldn't stand it anymore. You kept waving them around so much I couldn't see anything. Please... If you're going to show someone something hold it still for at least a few seconds. You kept saying "as we all know" but if we did, we wouldn't be watching. Thanks for the effort though.

Newbie dummy Help! How do I take the pin out to display a tyco hp2 car without destroying it just destroyed a mint chassis broke the whole front also I guess I need to know how to take it apart as well with out destroying it