If you have a pinion gear that is just not tight enough to stay put, blue loctite will usually do the job. Make sure the armature shaft and hole in the pinion are clean and free from oil, then one tiny little drop of the blue loctite at the end of the shaft. Gear can still be removed if you need to. Blue equals "medium strength". If you use red the gear will likely break or crack if you later try to remove it. Red equals "high strength". Great video.

@TRXperienced

2 жыл бұрын

Hi Jeff! Thanks for your comments!! Race Happy and God Bless!!!

I just seen a video about tweeking a part in your slot car, this video explains that,that part must be tweaked to achieve maximum speeds

Miss racing on the Maxx Track.!!.... Good tune up video 😎😎

Thanks for this. I learned a ton. :). New subscriber!

I've never tried that. Could you do a vid on the tear down and reassembly of the life like? Or a Rokar. I know they are almost the same chassis.

@TRXperienced

3 жыл бұрын

Hi Randy! Thanks for your comments and suggestions! Yes, I will do one for you. I thought that they might already one here on KZread, but there isn’t.

is this a Lifelike M or T chassis

@TRXperienced

6 ай бұрын

Happy New Year and THANK YOU for watching! It is a “M” chassis.

@ottodetroit

6 ай бұрын

any T chassis upgrades besides tires? I think T chassis are faster out of the box but less modifiable than M

@TRXperienced

6 ай бұрын

@@ottodetroit Tires and finding the best motor can is it for the T chassis!