Thank you.I have a case like the situation in video，but needs to be applied an angular displacement.When I use the rotx command,its unit is rad or degree,and can APDL recognize the pi without any additional set?

@SimuTechGroup

4 ай бұрын

Thank you for your questions -- First, solver units for angular displacement are always in radians. Next, APDL does not recognize the pi without any additional set. Define a parameter called ‘pi’ in the command snippet like this: pi=acos(-1) Then define your rotation in the D command as multiples of the previously defined ‘pi’ parameter. Like this: D,my_pilot,ROTZ,pi/2 (this would define 90 degrees rotation, ie; pi/2) Should you have additional questions, please direct them to info@simutechgroup.com or check out the SimuTech Skills Center: simutechgroup.com/resources/skills-center/

Thanks for your video, it's really helpful. I repeated the same steps as you but the displacement was 20.6mm, why?

@SimuTechGroup

11 ай бұрын

Thank you for your comment, if you are interested in SimuTech Services like training, mentoring, or consulting - please send us an email at info@simutechgroup.com or you can check out the Ansys Learning Hub here: www.ansys.com/services/ansys-learning-hub