Пікірлер

• 
  @papess690Күн бұрын

  Is writing the 'report definition' out after the simulation possible? I have .dat files that could check the value, but I can not find a way to write it out.

• 
  @BUY_YOUTUB_VIEWS_81423 күн бұрын

  This is my favourite channel. I especially like it when you explain everything so nicely. I wish you a lot of success with the channel and happy life.

• 
  @CAEProfHan24 күн бұрын

  I could save several hundreds hours if I watched this video three months ago. Thank you a lot!

• 
  @SimuTechGroup21 күн бұрын

  Glad it helped! For more tips like these, check out SimuTech Skills Center: skillscenter.simutechgroup.com/

• 
  @chitarraessenzialeАй бұрын

  Good video! Just one question: at the end of the video you didn't select "intrinsic" when you imported the curve (that seems a polarization curve and not a normal curve), Oversight? Thanks for the reply.

• 
  @user-io6vp2zu9yАй бұрын

  how do i change the port of the ssh ip aderess

• 
  @memingineer2 ай бұрын

  02:47, receiving error which generates a dump file without any details. Somehow, I can't gather original and inverse models in Workbench, where you have in system D.

• 
  @LetsStudytb2 ай бұрын

  Hi, I followed strickly the steps, but the resuling topology shape is not the same, it was removed more material. Do you solove the problem? Thanks

• 
  @ottoomen50762 ай бұрын

  Does anyone know if the student version of Ansys will let you import GDS files? My student version crashes when I try to import GDS. This is an excellent simulation software.

• 
  @BShahiWork2 ай бұрын

  The small offset was the key!!!, Thanks

• 
  @SimpleThingsOnly3 ай бұрын

  Hello! Please help me on this very frustrating topic for me. I am having problems to find the complete procedure on how to define motion in linear motor. After drawing simplified geometry of the motor and defining materials, I have no idea where to go to define translation and how the moving part of the motor will do translation. The model part is not even letting me have the option MotionSetup available.

• 
  @SimuTechGroup3 ай бұрын

  Thank you for your comment. If you are interested in simulation services like mentoring, training, and consulting, please send us an email at [email protected]. Alternatively, you can check out the Ansys Learning Hub here: www.ansys.com/services/ansys-learning-hub and if you are a student, see Ansys’ academic forum here: forum.ansys.com/

• 
  @SimpleThingsOnly3 ай бұрын

  Hello! Please help me on this very frustrating topic for me. I am having problems to find the complete procedure on how to define motion in linear motor. After drawing simplified geometry of the motor and defining materials, I have no idea where to go to define translation and how the moving part of the motor will do translation.

• 
  @MrBhavsar3 ай бұрын

  Thank you for the demo. Is it possible to add the pivot feature? If IGVs are there which can be rotted about its pivot, then they are subjected to have leakage flow. In that case, it is important to model the pivot in the clearance and mesh it. Is it possible to mesh this feature in new turbogrid? Also, is it possible to mesh the cooling holes in turbogrid. Thank you.

• 
  @SimuTechGroup2 ай бұрын

  Hi, and thank you for your comment. We've shared your feedback with the Engineering Team.

• 
  @aether3663 ай бұрын

  such a great video!

• 
  @sofiajocelyn36123 ай бұрын

  How did you define the edge? Thanks for the video!

• 
  @SimuTechGroup3 ай бұрын

  Thank you for your comment. The edge can be defined in either Ansys Discovery Modeling, Ansys SpaceClaim, Ansys DesignModeler or in the CAD package that the geometry was created in. If you are interested in simulation services like mentoring, training, and consulting, please send us an email at [email protected]. Alternatively, you can check out the Ansys Learning Hub here: www.ansys.com/services/ansys-learning-hub and if you are a student, see Ansys’ academic forum here: forum.ansys.com/

• 
  @TalonMath3 ай бұрын

  so, by change the topology to "merge", the big volume will automatically be split into 2 volumes, right? this is different from what I am struggling now

• 
  @SimuTechGroup3 ай бұрын

  Hi, thank you for your question. Assuming you are referring to the first model shown (ie; the rectangular volume with the thin plate with the pattern of holes in it), no, the Share Topology, Merge setting does not split the volume. Using the Share Topology, Merge setting effectively imprints the hole pattern that is on the fluid volume on the left onto the fluid volume on the right once it is taken the meshing application (ie; either Ansys Workbench Meshing or Fluent Meshing). If you are interested in simulation services like mentoring, training, and consulting, please contact us: simutechgroup.com/contact-us Alternatively, you can check out the Ansys Learning Hub here: www.ansys.com/services/ansys-learning-hub and if you are a student, see Ansys’ academic forum here: forum.ansys.com/

• 
  @TalonMath2 ай бұрын

  @@SimuTechGroup i think I got the reason of my problem: share. looks like that I need to define the share tolerance in the space claim .Thank you for your reply:)

• 
  @user-bv3cv4qi8p3 ай бұрын

  Can you give the temperature to the node? on the command ? Looking at your lecture, it seems like you can apply pressure to the node, but there is no temperature.

• 
  @SimuTechGroup3 ай бұрын

  Hi and thanks for your questions. As a load in Mechanical, no. In the Mechanical GUI temperature loads are applied as Thermal Conditions on bodies only, as a constant temperature across the body. To apply a temperature distribution (ie; a result from a steady state thermal or transient thermal that is contained in the same Workbench project), link the Solution cell from the Steady State Thermal or Transient Thermal to the Setup cell in the Static Structural in the Project Schematic in Workbench. Temperature loads can be applied as body forces on elements via commands, not to nodes.

• 
  @user-bv3cv4qi8p3 ай бұрын

  Is that right? Or, I think, what do you think about adopting giving the temperature according to each location from external data? I think it is the same as giving temperature to the node.@@SimuTechGroup

• 
  @divyashreem98994 ай бұрын

  Well understood Sir. Thanks for sharing

• 
  @SimuTechGroup4 ай бұрын

  Thank you for your comment!

• 
  @AliShan-se2cf4 ай бұрын

  how we can draw the graph between leakage inductance and thickness of the inductor

• 
  @SimuTechGroup4 ай бұрын

  Hi there. In this case, the thickness of the transformer needs to be parametrized. Once the simulations are completed, the graph leakage inductance vs. the thickness can be generated by replacing the default Freq by the defined transformer thickness parameter. Hope this helps! If you have additional questions, or are interested in Ansys Training or Mentoring, please reach out to [email protected]

• 
  @anthonypiney60154 ай бұрын

  What is the procedure when you need to move several objets in one translation movement? I have the following error messge : " A wrapper object is required to contain all the moving objects in band for translation motion. The result will be wrong " Regards,

• 
  @SimuTechGroup3 ай бұрын

  Thank you for your comment. If you are interested in simulation services like mentoring, training, and consulting, please send us an email at [email protected]. Alternatively, you can check out the Ansys Learning Hub here: www.ansys.com/services/ansys-learning-hub and if you are a student, see Ansys’ academic forum here: forum.ansys.com/

• 
  @yqgao61954 ай бұрын

  Thank you.I have a case like the situation in video，but needs to be applied an angular displacement.When I use the rotx command,its unit is rad or degree,and can APDL recognize the pi without any additional set?

• 
  @SimuTechGroup3 ай бұрын

  Thank you for your questions -- First, solver units for angular displacement are always in radians. Next, APDL does not recognize the pi without any additional set. Define a parameter called ‘pi’ in the command snippet like this: pi=acos(-1) Then define your rotation in the D command as multiples of the previously defined ‘pi’ parameter. Like this: D,my_pilot,ROTZ,pi/2 (this would define 90 degrees rotation, ie; pi/2) Should you have additional questions, please direct them to [email protected] or check out the SimuTech Skills Center: simutechgroup.com/resources/skills-center/

• 
  @sachxx4 ай бұрын

  Hi i dont know why but in my ansys if i click geometry i cant see the layered section option do u know why i cant access it ? thanks

• 
  @SimuTechGroup3 ай бұрын

  Thank you for your comment -- to access Technical Support, reach out to your Ansys provider.

• 
  @anthonypiney60154 ай бұрын

  hello sir, I sent to you an email for assistance, could you just confirm me that you received it well?

• 
  @Alok2184 ай бұрын

  How to choose different surface under construction geometry?

• 
  @SimuTechGroup4 ай бұрын

  Thank you for your comment. Currently as of ANSYS release 2024 R1, only coordinate systems can be used to define construction geometry surfaces. To define another construction geometry surface, one needs to define, position, and orient another coordinate system. Should you have additional questions, check out the SimuTech Skills Center at www.simuportal.com/ssc/landing-page or please email [email protected]

• 
  @metseo14 ай бұрын

  I showed your video lecture for contact tool, and thank you very much. I have a question about a problem I have never experienced with the contact tool. When I insert a contact tool, a question mark appears in the upper left corner of the contact tool. Even if you try to delete it, it says that some paths to the contact tool cannot be found and it is not deleted. I would appreciate it if you could tell me what the cause is and possible ways to solve it. Thank you in advance

• 
  @SimuTechGroup4 ай бұрын

  Thank you for your comment! Unfortunately, the question posed is not something we can answer without knowing the details of your particular model. We highly suggest you submit a support case to your support provider. If you'd like additional information, you can reach out to [email protected]

• 
  @umarfarooq54024 ай бұрын

  Great place for work environment

• 
  @SimuTechGroup4 ай бұрын

  It sure is!

• 
  @umarfarooq54024 ай бұрын

  Thanks! Can you make a video on aeration flow in spillway by using LES and DES techniques

• 
  @SimuTechGroup4 ай бұрын

  Thank you for your comment! We've forwarded this request to our engineers.

• 
  @danielsamihamade25695 ай бұрын

  Great video thank you

• 
  @mojekh5 ай бұрын

  Really informative video, thank you!

• 
  @Draxs_studios5 ай бұрын

  How did you create the geometry? pleaseee

• 
  @DThorn6195 ай бұрын

  Its because of videos like these that I'm subscribed. 😂

• 
  @subodh2195 ай бұрын

  If anyone understand ,pls help me to define surface?

• 
  @SimuTechGroup5 ай бұрын

  Thank you for your comment. The construction geometry ‘surface’ is defined by the intersection of an X-Y plane that passes through the model. Typically one can define the location and orientation of an existing or new coordinate system so that the X-Y plane passes through the model at the area of interest. The help menu in ANSYS also has further information how to define and use these construction geometry surfaces. Should you have additional questions, reach out to [email protected]

• 
  @samirhaddadi42175 ай бұрын

  thanks for video, where can I fine some documentation for better understanding of what are harmonic indices

• 
  @SimuTechGroup5 ай бұрын

  Thank you for your comment! You can check out our comprehensive library of educational materials for Ansys products here: simutechgroup.com/resources/skills-center/ We share videos, lectures, tutorials, and workshop problems that will help you familiarize yourself with Ansys tools and better understand how and when to use them. If you are interested in training, mentoring, or consulting with SimuTech Group, please send us an email at [email protected]

• 
  @ahmetunal42835 ай бұрын

  Great video, thanks... If you would like to take it one step ahead, import points into Excel, do a best fit curve, recreate points using the equation in a more uniform distribution. This prevents any non-uniform slope changes between any two points by creating a much smoother curve.

• 
  @SimuTechGroup5 ай бұрын

  Thanks for sharing!

• 
  @MrWillSueU-zk4qh5 ай бұрын

  Big Help. You're awesome. Thank you.

• 
  @faizanafzal885 ай бұрын

  Hi my question, I am using ANSYS 2023 R2. By using RSM can I design and pre-process job in Ansys mechanical while another job being solved in the Ansys solver?

• 
  @SimuTechGroup5 ай бұрын

  Thank you for your question! The short answer is 2 licenses are required. Using RSM doesn’t multiply your licenses - it allows you to use bigger, remote computing hardware.

• 
  @aakashsahu18835 ай бұрын

  Nice video, If I want to simulate the draping behaviour in LS DYNA can I use ACP for material modelling?

• 
  @Juaquinn-bl9te6 ай бұрын

  How can you save this transformed mesh?

• 
  @SimuTechGroup6 ай бұрын

  Hello, thank you for the comment. We apologize for the delay in our response. After connecting with our engineering team they advised that once the mesh is reflected, you can save it just like any other CFX model. If you are interested in learning more about training, mentoring, or consulting please send us an email at [email protected]

• 
  @shindongseok3047 ай бұрын

  Hello. I'm curious about the process of defining a Fully Integrated Solid Mesh with SOLID 186. Do you have any videos or tips related to this?

• 
  @SimuTechGroup6 ай бұрын

  Thank you for your comment. At this time, we do not have any videos related to this, but your request has been shared with our engineering team. In the meantime, if you are interested in paid Ansys training, mentoring, or consulting please send us an email at [email protected] to get in touch with our team.

• 
  @mhdelrifai7 ай бұрын

  Thanks a lot for the explanation. Can you post a screenshot of your temperature settings of the time dependent heat load (steady-state thermal b5 -> temperature)? That would be quite helpful!

• 
  @SimuTechGroup4 ай бұрын

  We've forwarded your request to the engineering team. Should you have additional questions, please reach out to [email protected] Thank you for watching!

• 
  @pranav38137 ай бұрын

  Great explanation

• 
  @qw1122457 ай бұрын

  hello, may i know how to import a mesh model from another apdl to a blank apdl file ?

• 
  @SimuTechGroup6 ай бұрын

  hello, we apologize for the delay in getting back to you on this comment. After speaking with our engineering team, they advised that within the Mechanical APDL GUI, go to the file menu and then pick "Read Input from", and then select the .cbd file that is the desired mesh file to import. If you have any other questions or if you are interested in Ansys training, please send us an email at [email protected]

• 
  @ashishrajoriya31897 ай бұрын

  Hi, how you wrote the constraint equation. could you elaborate. I am also working on coupling on node in ANSYS WB, which can easily done in APDL using CP command. But I am trying to find a way to use it in ANSYS WB. It will be a great help, if you could share your experience. Thanks. Ashish R

• 
  @SimuTechGroup7 ай бұрын

  Thank you for your comment. You can find additional tutorials and leanings on the SimuTech Skills Center here: simutechgroup.com/resources/skills-center/ Or if you are interested in training, mentoring, or consulting with SimuTech Group, please send us an email at [email protected]

• 
  @jjzh7 ай бұрын

  Great video! I also have a quick question: how is the set of vertices to be defined on python for the addpoly function?

• 
  @SimuTechGroup7 ай бұрын

  Hi, thanks for the comment! The vertices used by the addpoly() function are defined in the format similar to matlab arrays. e.g. [A B; C D] would define a 2x2 array where the semicolon designates a new row. You can then pass this array into the polygon by using the set() function. Below is an example code you can copy and try: vtx = [1,0;2,2;4,2;4,1;3,1]*1e-6; # microns addpoly; set("name","random_polygon"); set("vertices",vtx); set("z span",2e-6); If you have additional questions or are interested in training, mentoring, or consulting, email us at [email protected]

• 
  @taosifalam13667 ай бұрын

  Thank you so much for this helpful tutorial video. Your clear explanations and step-by-step instructions made it so much easier for me to understand. However, I am wondering, if we can define thermal contact conductance both as a function of temperature and pressure. In that case, how can I construct the table to define TCC vs (Pressure, Temperature) ?

• 
  @SimuTechGroup7 ай бұрын

  Thank you for your comment. Yes, thermal contact conductance can be a function of both pressure and temperature. The TCC table in the command snippet needs to be a two-dimensional table, with pressures along the rows and temperatures along the columns. Add TEMP as the 2nd variable when dimensioning the table. If you have additional questions, or are interested in Ansys training, mentoring, or consulting, please email us at [email protected]

• 
  @andrewjoseph22797 ай бұрын

  Thank you!

• 
  @zghelich8 ай бұрын

  I wish you could show how you made the geometry.

• 
  @SimuTechGroup4 ай бұрын

  Hi, thank you for your comment! We've shared this feedback with our engineering team.

• 
  @mihirdafauti26478 ай бұрын

  Hi, I am facing the following error while simulating Linear motor, your suggestion to solve it will be appreciated: Internal Solver Error: 'Non-moving geometry or modeled line object detected in the band. You may need to reassign the band or add additional objects to the list of moving objects. Modeled line objects cannot be within the band or on the border of the band. I have checked the band edges and other things, however I noticed that if I simplify the rotor geometry the error disappears Thanks in advance !

• 
  @SimuTechGroup8 ай бұрын

  Thank you for your comment. If you are interested in training, mentoring, or consulting with SimuTech Group, please send us an email at [email protected] or you can check out the SimuTech Skills Center here: simutechgroup.com/resources/skills-center/

• 
  @yongli78478 ай бұрын

  Does this method works when I use Ansys Maxwell 3D?

• 
  @SimuTechGroup4 ай бұрын

  Thank you for your comment. We suggest you contact your support provider. If you are a SimuTech customer, you can send a request to [email protected]. If you are using academic licenses, you can use Ansys’ academic support forum at: forum.ansys.com/

• 
  @talhaa80968 ай бұрын

  How did u create this geometry?

• 
  @SimuTechGroup7 ай бұрын

  Hello, the geometry was created in Ansys SpaceClaim with arbitrary dimensions. If you are interested in training, mentoring, or consulting with SimuTech Group, please send us an email at [email protected] or you can check out SimuTech Skills Center here: simutechgroup.com/resources/skills-center/

• 
  @Imran-Khan-20109 ай бұрын

  Thank you for this great explanatory video