have watched your every tutorial video, and i learned much from them. Here, I thank you very much! Lookin forward to your next one! Come on.

@abaqusacumen7397

7 жыл бұрын

Subscribe the channel you will get notification when I upload the new video.

@yanggreen2984

7 жыл бұрын

of course. I subscribed.

@lionel7870

6 жыл бұрын

please, how are we doing the rotation of the water, as on the screen

Отличный урок!

@abaqusacumen7397

7 жыл бұрын

Thanks a lot for your support from Russia.

How to simulation the rocket impact and explopsion? Please help me. Thank so much

Thanks so much for your great videos! This one was very helpful. I was wondering if you'd be able to do one similarly but using rotational movement such as in a mixing tank, together with an agitator / mixer blade? I'm struggling to decipher how to declare my rotation of the tank and then to rotate the blade in opposite direction too?

Great video thanks for it

@lionel7870

6 жыл бұрын

please, how are we doing the rotation of the water, as on the screen

Thanks for your share. I have a question here. For the dummy part, why do you use shell type? I saw you changed it to shell type from solid.

Hi can you tell me how to find centre of mass of the liquid volume [dynamic output]. I want to plot centre of mass location with gravity

if we add abaffle in between how would we set the boundary conditions?

Sir, could you please help me with a simulation. I want to do an under water impulsive loading simulation on a cylinder using CEL where I need to create a blast wave by appling an input velocity profile in the inflow Eulerian boundary condition. But I can't understand how to give a prescribed velocity in the inflow condition.

Sir can you do a video tutorial on fluid leak through a metal-elastomer?

amazing cae, if i analyze a tank trailer, and i put the tank like rigid. the load would transmitted to the chassis?

Hello sir can you please help with modeling the blast load on element using CEL analysis.. please upload any video tutorial for it if possible

Dear abaqus acumen, thank you for your very informative videos on abaqus. They are priceless. I just modeled a similar tank-sloshing problem, but interestingly it looks like water penetrates through the tank ( like water leakage especially at the bottom surface) Similiar issue can be seen in this video between 0:50 - 1:00 and I think you kinda arrange the view-cut sensitivity&value. I wanted to know If you ever faced similar problem and have any solution? Please keep up the great work. Bests

@sezerozturk6278

3 жыл бұрын

Merhaba Ercan Bey, ben de aynı sorunla karşı karşıyayım, acaba çözebildiniz mi leakage problemini? Kolaylıklar dilerim.

@ercankaya7990

3 жыл бұрын

@@sezerozturk6278 Sezer bey merhabalar, o zamanlar araştırdığım kadarıyla leakage probleminden ziyade görsellik ile ilgili problem var kanaatine varmıştım. Kendisi de zaten yukarıda belirttiğim zaman aralığında görüntü ayarlamasıyla nispeten düzeltme yapıyor. Dolayısıyla, gerçekte sızma söz konusu değil ancak o şekilde gibi görünüyor sadece. Benzer tutoriallarda da aynı görüntüyle karşılaştığım durumlar oldu dolayısıyla renderlama ile ilgili bir konu olduğunu düşünüyorum. Ancak tank içerisindeki sıvı seviyesinde kayıp söz konusuysa BCs koşullarını gözden geçirmenizde fayda var sanıyorum. Aradan zaman geçtiği için çok da hatırlayamadım, dolayısıyla sorunuza cevap olmadıysa kusura bakmayın. İyi çalışmalar dilerim.

شرح رائع بالفعل راسلتك علي الايميل بخصوص عمل هذا الفيديو .... شكرا لك

@abaqusacumen7397

7 жыл бұрын

Thank you.

Hello sir, Have a nice day, First of all I'd like to thank you for sharing such an amazing video. I did the exact steps you did in the video but the analysis could not be completed due to some errors. I couldn't figure out what I did wrong. May I send you the file to check it for me, if that will not bother you of course. Thanks for your corporation

Sir have you made videos on friction stir welding using CEL method?

Questions! 1) Can we say this method an alternative to the real "CFD" analysis? 2) I have seen many CEL simulations but only for liquid cases. What about "Air". Is there any reason why other experts do not simulate Air flow with CEL method?

Hi, first of all thanks for your all nice and educative videos. I have watched your several videos. I like the way you explane it. I have one request that please make a video for water bubble expansion in tank with high initial pressure. Thanks, S K Pandey

@abaqusacumen7397

3 жыл бұрын

Noted

@sanjay6505

3 жыл бұрын

@@abaqusacumen7397 thanx for your prompt response. Waiting for your video on bubble expansion.

Me too i hope that you can upload a video of sloshing of water tank due to earthquake including how to model the tank .its urgently required.thankyou

please make a video for airbag inflation using CEL approach

Can you please upload a video of soil pile using cel

Great videos Sir. I had a question. I was wondering if applying hydrostatic stress in the initial step as initial conditions is important or not?

@abaqusacumen7397

7 жыл бұрын

hydrostatic stress in the initial step

can you upload a video of sloshing of water tank due to earthquake including how to model the tank .its urgently required.thankyou

@kunalgetsit

6 жыл бұрын

did they sent it ?

@praneethajogi1286

4 жыл бұрын

Even I need that...if you have that model, please share it to me.. praneethajogi@gmail.com

Hello Abaqus Acumen, thank you for the tutorials about CEL. It helped me alot. Though I have a question. In my CEL-Simulation, there are some leakings. I mean that sometime the fluid flow through the rigid body. Do you know, why it is leaking. How could I stop the leaking? Thank you in advance for the replies. Best regards, Gunardi

@abaqusacumen7397

7 жыл бұрын

Please refine the master surface with fine mesh. Also refine the CEL mesh.

Hi, Iam working on this model, I wonder how I can gain contact pressure between liquid and tank? is it possible in CEL or not? because when we suppress the dummy part we can't define contact there? I really appreciate regarding you answer my question. best regard

@abaqusacumen7397

7 жыл бұрын

Make tank deformable and check the contact pressure

@arashfarzin4138

7 жыл бұрын

Thank you so much, I have big problem since my tank is 20*56*12.3 (m) filled with water 11.2, I have severe penetration in shell and reduced thickness, I can't get sloshing, I made the mesh very fine and the problem doen't solve. what else should I do? please help. best regards

Hi, Could you please include /add underwater explosion tutorial with ALE or CEL approach here in urgent? Or if you contact with me we can discuss the details with regards to payment etc.

Sir, may i contact ur email? I really need ur help for my simulation, thanks

waiting for your reply.....check your mail.

Great vid Sir! I have a question about adaptive remeshing. How do i get the mesh to move like in this video? kzread.info/dash/bejne/k5uBzpSic6qreMY.html

@lionel7870

6 жыл бұрын

hypermesh software

Very bad presentation, need to slow down during command operation & cover the fullscreen. Your model is not executing even after following all the steps, showing errors!!