Imagine if you have two hard plate and you want to squeeze paste between them. Is this possible with FSI method?

Sir, my stopper is bending drastically nd moreover stopper is shown in white colour I dont know why I have checked my values numerous no. of times. What does it mean when an instance is shown in white in results and not showing colour contours nd the reason behind its that much bending. please reply

@simtech0598

3 жыл бұрын

Dear, Make sure correct youngs modulus and density for the stopper. Check unit consistency. White is representing results not applicable to that component. Volfraction results only for Eularian domain. If you will check stress/strain/displacement than contour will be visible for stopper.

Very Helpful and interseting Lectures Sir.. I'm going to be simulating the flow through soil-type materials, specifically looking at permeability. Could you suggest some videos or platforms that would be beneficial for this? Your guidance would be greatly appreciated.

@simtech0598

8 ай бұрын

I never tried permeability with Abaqus FSi.

How to model a fluid filled enclosed structure (fluid at certain uniform static pressure and enclosed structure is made of balloon) and that system subjected to a water jet to calculate the deformation and stress.. Your kind suggestion is needed in this regard

@simtech0598

3 жыл бұрын

Dear, Methodology remain same. You need to model structure (balloon) surrounded by Eularian domain. Use volume fraction tool to fill structure (go with 3rd video of CEL on my channel). Apply appropriate BCs.

Why did you set up "H-F" in step of Predefined Field? If you set up the gravity of water, the water pressure to wall sholud have emerged. Is the set-up of stress to wall repeated again ?

@simtech0598

Жыл бұрын

Dear, Gravity load start working from step 1 and onwards. So settings the predefined H-F will insure the pressure load from initial step itself...later gravity play.

Which type of element did you use for the stopper?

@simtech0598

2 жыл бұрын

C3D8 element as i remember.

Can u please create a video of bulk material discharge simulation in a elevated silo?

@simtech0598

4 жыл бұрын

I hope you are talking about soil ? SPH is better option.

id like to perform the structural analysis of windshield by FSI so plz help me regarding the process bcz in u tube there's so many vedio regarding the co-execution of cfd and fea but did't have any detailed explanation. help me regarding this . thank you

@simtech0598

2 жыл бұрын

Dear, How can i help you?

@041_vedant_aero8

2 жыл бұрын

@@simtech0598 in 2020 version theres no cfd solver and apart from that i have no idea how to do so bcz in all FSI tutorial they show the process done by means of star ccm+ and abaqus , i have downloaded the both software but don't know how to execute the analysis

@simtech0598

2 жыл бұрын

Dear, Abaqus alone capable to solve FSi problems. Let me know what is your analysis boundary conditions for windshield. You can also drop a mail.

@041_vedant_aero8

2 жыл бұрын

@@simtech0598 okay sir give me ur email id ill mail u all the details and problems

@simtech0598

2 жыл бұрын

Dear, My contact details avilable in each video discription.

Hello, Could you please send me your email; I have a problem simulating a marine energy recovery system (CEL modeling). How can I send you the model and discuss it?

@simtech0598

Жыл бұрын

Dear, My mail id and other details are available in video discription. Mail id - gkn0504@gmail.com