You have no idea how you inspire people to save electronics instead of turning them on e-waste. I'm all the way down here in Brazil and everytime I have the opportunity to at least try to save something, that's my goal. I fix it until it's too broken. I even tried to fix my own ps4, but then I discovered that the hdmi chip has to be replaced and that's out of my league. Keep up inspiring people, man!

@tydshiin5783

7 ай бұрын

I'm not an expert with ps4s but You can probably source yourself a dead or donor ps4 and take the chip from there, or is it like soldered like the nands of macs where you'd need a heat gun instead

@seguramlk

7 ай бұрын

YES

@finntjomstol9364

6 ай бұрын

@@seguramlkover the last month I’ve bought 4 broken ps2s, 8 broken controllers, 2 broken “new” ds’s and a 2 broken switch lites and after watching him for years and literally have the confidence to repair anything unless it’s too broken ofc then I sell for parts lol

always satisfying to see another console saved

@EraserTraceur

7 ай бұрын

Lul dudes a magical shaman 🧝‍♂️

@daniels5607

7 ай бұрын

Agreed alway good to see lesss ewaste

@robertIlagan

7 ай бұрын

I love watching your channel

I've heard that Valve is gonna remove the glue on the battery on the Steam Deck for easily replacement to match the new EU standards about batteries replacement. Hope Nintendo and others will follow (if they have the choice)

@Tronicsfix

7 ай бұрын

Yes, hopefully they will follow!

@isaacdelima1825

7 ай бұрын

What's heared?

@9Tailsfan

7 ай бұрын

@@isaacdelima1825 Just a typo. The OP meant 'heard'. The past tense form of hear.

@paracethamol4799

7 ай бұрын

​@@isaacdelima1825 Sorry english is not my first language.

@KingBanana123

7 ай бұрын

Why batteries even glued in the first place.. that's just anti-repairability. Old devices with detachable batteries works fine before. If concerning the batteries will fall off, just put a locking mechanism..

18:00 The screen is not done for. Two options there. 1. If the cable is long enough: Cut the corroded part off. Gently scrape the ribbon cable to expose the metal lines. Reconnect. 2. If the cable isn't long enough: Paint the traces with "metal nail polish". Scrape in between the metal lines to remove excess nail polish. Test for shorts. Reconnect. I've tried both with PS controllers and things like that and always worked.

@gumbypokey7

7 ай бұрын

I agree but if I had to guess the subtext here it's more about the time/effort required to do it. Then there's the fact he's giving them away and likely wants a reliable fix.

@mariolog

7 ай бұрын

@@gumbypokey7 True. That would be a free fix, a fix for a friend or oneself. And it takes less than 5 minutes to scrape the plastic layer to reach the lines. I just meant the screen is not done for. In my experience, it's also been a permanent fix for non moving parts like in this case. I'm also sharing a fix for someone with a similar problem trying to fix their own stuff, I hope someone finds it useful :)

@alexlefevre3555

7 ай бұрын

I've used pad strips successfully in this context.

@mariolog

7 ай бұрын

@@alexlefevre3555 What's a pad strip? Couldn't find it after a quick search.

@maklogetrich2378

5 ай бұрын

​@@mariologa thin layer of pad, like the original pad

I liked that fast forwarded part where all has been put together around the 13:30 mark. It really shows how much work gets into them. And as long as it is in moderation this can be a handy tool for possible future videos.

It’s been quite a bit since the last switch repair video! Glad there is another one 👍

@Tronicsfix

7 ай бұрын

I’ve got another one coming up soon too. Glad you enjoy these!

@dantenajera9687

7 ай бұрын

Why?

My kids are hard on electronics. 😅 Happy you could save two, Steve!

@Tronicsfix

7 ай бұрын

Kids are the true electronics testers!

Love watching your stuff! Always makes me wanna open my stuff to take a look. And, some of the lite videos helped me fix my son’s switch.

I always enjoy your videos, and this one is no exception. Thank you for the work you do and for sharing it with the community.

I have started doing self repairs as a hobby thanks to you! Went crazy and bought a whole bunch of stuff! Thanks for the content my friend!

Im happy to see your videos bringing back to life the console you repair , what a satisfaction 😍❤️

Always appreciate your right to repair, even if they don't want you to. Keep up the great work, been following for years Steve.

Excellent job. I've been following your channel for a long time and I know how difficult it is to work with game maintenance without good equipment for it. For the great content you have another subscriber. Greetings from Brazil.

This was such a satisfying repair! Nice job Tronic.

I'm consuming your videos like an addicted. They are so good and helpful. I managed to fix my PS1 because of your video fixing each playstation. Thanks :3

Thank you, I love watching your videos Steve. Keep up the awesome work and keep on bringing dead electronics back to life and keep adding the "Perfect Amount of Thermal Paste"

I love seeing more Aussie content creators! Nat, you are doing the lords work on these gameboys!

Absolutely love your videos. They're so relaxing to watch!!! Keep up the good work!!

@Tronicsfix

7 ай бұрын

Glad you like them!

Hoo dog! A firm reminder to keep liquids away from your consoles! Also: did a yeti try and plug the USB port into that last one or something???

@9Tailsfan

7 ай бұрын

I use a water proof laptop bag when I take my tech with me. And I don't drink or eat near my gear either.

@DarrLaw

7 ай бұрын

Even worse. It was a child. We now buy the warranty as a matter of course for new Switch Lites for the kids!

@nasapeepo721

3 ай бұрын

I always keep any liquids away from any electronic device, even if it is waterproof. My senses start to tingle if I don't. Especially when someone else puts their drink near my electronic stuff. You'd be surprised how careless people can be, not only with their own stuff but others as well. You can't take care of someone else's stuff if you don't take care of yours in the first place.

Have to say I also love my ifixit tools, the only issue I have is I wish the bit marking was clearer, sometimes it's a little difficult finding the correct bit looking for the stamped mark in the foam

Tip for deep dicharged Batteries: take a full one of the same type, connect + to +, - to - and let it sit there for a few seconds. Thats usually enough for the charger to kick in. I jumpstart my eneloops all the time this way when they were deep discharged (by flash Light for example). Such a battery usually cant hold the Same amount of Ah afterwards though. Li Ion take it very Personal if they get discharged to 0 V.

Always cool to see you fix electronics.

14:12 good to see that you also use the natural steam moisture to clean surfaces 😂 I'm so loving this channel!!! Though I cant repair, I almost every day use that technique!!!

Thanks steve for more nintendo switch repairs keep it up💪💪💪

Absolutely astonishing, if it wasn’t for you I wouldn’t have been able to fix my Xbox One, massive props thxs tons🤙🏽

That's awesome you fixed two of them! I've got a few things I'd like to fix myself after watching your videos. Gonna have to pick up a soldering station and give it a whirl!

@tydshiin5783

7 ай бұрын

A pro tip is to get solder that's got actually lead or high lead content and get good flux, solder with high tin content is really crap to use

Great Repairs and Video! Great education too. Thank You. 😀

Always interesting to Watch, I can't get enough of your Videos.

Awesome video, it made my day just seeing you fix electronics :D

Years ago I remember having a phone pre usb connector days that never charged unless the battery had enough charge to power on even if it was for at least like 10 seconds or so, I had another phone that used same battery and could charge the battery with that even tested it by charging for a minute or two to give it enough power to turn on then let it fully charge and it did. Never worked out why unless it was something to do with the circuit.

Thoroughly enjoy your videos! Keep them coming and have a great afternoon

Another fantastic video, I’ve learnt so much watching your videos, keep up the great work Steve 👍🏻👍🏻👍🏻

i love how ur down to earth ..... keep it up

your videos inspired me to try to fix the PCB of my old Dell Ultrasharp monitor. Blown caps is real... Failed miserably with poor soldering job, but worth the effort and lessons learned. Next time will be a success.

Love your videos. Always learning something new

New drinking game: Take a shot every time he says "IFIXIT."

It would be interesting to see you build your own dead battery charger. Ive seen big clive videos on charging beyond dead batteries.

@Tronicsfix

7 ай бұрын

That’s a good idea.

Very interesting and generous as well!

2 outta 3! Nice work! I'm at 6.5 out of 8 for my most recent repair list.

What sort of equipment do you need to remove a chip or connectors from the mobo like that?

Awesome job once again!! I would love to have a Switch Light for my kiddos 🙂

So glad you're now sponsored by IfixIt, Steve! I've always enjoyed watching your great content. Keep doing what you do best: applying the perfect... I mean, fixing electronics. But you do apply the perfect amount of thermal paste, too.

Fantastic video as always Mr Steve 👍😊

@Tronicsfix

7 ай бұрын

Thanks Joey!

Hi. I’ve been watching your channel for a while now and I love your content. I just had a small suggestion if you don’t mind. If you could show the cost of the parts required to fix the items in your videos it would be very helpful. That way we can know what kind of damage our device has, how much it will cost us to repair it and if the repair shop is trying to overcharge us.

I love seeing you reduce e-waste and fix some beautiful machines

A note on the bits for the driver set. The one thing ive been unable to open with the the tri wing bits are wii nunchucks, the screws are recesed too deep for the bits to reach.

I have a newfound appreciation for electronics and the manufacturers this is peak humanity

I have a Switch V1 with no touchscreen feedback. I tried to swap a game slot and a digitisers but still no avail…any other idea I can try to solve this issue..I tried format and all of it and it’s still the same

I have bought a laptop only on the screen is duct tape what is best to remove the glue and dirt from it without damaging the screen tanks

All for free? I wish I could fix it lol. Still amazing repair Steve!

not sure if you realised after but you can replace the shell without removing the battery. it can stay adhered to the midframe and you remove it in one piece

So amazing. I want to get into doing this stuff but I NEVER know where to start or what to do...

I love the Ifixit set as it's got everything to fix kids toys as they always have small screws

You might be able to take a good fully charged battery and jump the power and ground to the dead battery and leave it connected for about 30 secs to a min and it might give the discharged battery enough power to take a charge. I have done this with several drill battery's and a couple car battery's and it has worked great.

Does a machine do all these chips and stuff on these game systems boards or does a person do them like you do? Also I have a ps1 console that’s been in my closet since I got it for Christmas whenever they came out. Idk if it works or not but you can have if you want. I don’t have the cords tho.

Still freaks me out cleaning boards on water/ultrasonic cleaner, but happy it works

Amazing work ❤

Any idea how one might approach the purple screen of death on a switch lite? I've got one that's in perfect condition but can't find anything definitive to approach and resolve said issue. Also I'm always so impressed on your hot air gun rework. I can't use a hot air gun for the life of me, because of which I have the approach everything with an iron and low melt. Although I'm pretty certain my station needs calibration for the hot air as it is an off brand set. I'm still learning reworking!

love the videos. Friday is a good day :)

What is that cleaner spray you use.bw100 or something like that..thank you

What do you use in your ultrasonic cleaner to clean the PCBs?

So this might be the wrong place but im out of ideas. Can I turn the Rog Ally into a phone? I have to get a new phone and was thinking to use aome kind of adapter to just use the console as a phone until then. Anything out there?

I was given an Aldi grinder the 18v batteries were flat to the point the chargers could not see them. I got some wire and did plus to plus and minus to minus on a car battery for a couple of minutes and then the charger could see and charge them. I have done similar with another tool I was given. And guys on the Aldi tool forum confirm it worked for them as well

I’ve got GoPro hero 8 that’s not working Would you be able to fix it mind you I tore the front face off to get to the screws. Then I realized I lost my iFixit screw set. I would like to have it back in working condition with a new front face.

Thank you sir for the switch, now I can play some game.. 👍

Man! I'd love to own a TronicsFix Switch Lite!

Definitely my main person to watch while working on my only electronics lol and I watch on my free times too lol

Love your Videos Always Impression how you can fix all this Stuff i'm to stupid to so that 😂😂😂 Keep Up your awesome Work in fixing everything 😊

Amo ver os consoles sendo salvo❤

Hi ,i recently got a nintendo switch V1 that doesn't turn on or charge it stays 0.000a but the voltage flickers a bit. I opened the switch and tested all the capacitors for shorts but none of them was ! Even the fuse and the coil was good. I noticed that the charging port was replaced by someone else ,and it wasn't exactly like the ones on the internet that i compared ! I wonder if the port has something to do with this problem or there is a different problem ?? Ps . I didn't tried to test it with a different battery because i don't have another one ,only have my switch lite that i bought brand new and i don't know if the battery works on a standard switch 🤔. Anyway, some help please 😅👍

I got one for 15 usd. The joysticks were all wonky. I finally got a replacement joystick months later and noticed that it was the ribbon cable that was corroded. Cleaned with isopropyl alcohol and it was as good as new. Digitizer is busted but doesn't really matter I suppose. All the screws are missing as well lol. I'm happy with the use I've gotten out of it

You need a bench power supply, super useful for fixing to power things directly but very useful to bring dead undervoltage lion batteries back to life. Great video though :)

I wish I had the confidence, skill set and tools to have swapped that power management chip when my son's Lite failed with a similar error code on New Years Eve - cost £70 for a nationwide reseller and repairer (CEx) to fix. However - I did replace the screen myself last year after his sister dropped something on it using the iFixit guide and parts from eBay so that saved some money (and heartbreak).

What temperature do you have your hot air station at?

nice and chill repair video

That 2101-0002 was the one my 2017 switch had and never turned on again a few years ago

i've been trying to change aa usb-c port for like 2 days now on my own switch lite but my hot air station does not melt the solder. can you give me any tips or tricks on what i might do wrong? love from sweden

He LEGIT breathed on the screen of the first Switch Lite to CLEAN it !!! THAT WAS GRRRRRRROOOOOOOSS!!

Other then consoles do you work on any other electronics? Id like to see something bigger

What liquid are you using in the ultrasonic cleaner? Water? Isopropyl alcohol?

Hi so I wave a problem my Nintendo switch lite does not Turn on it just show the backlight working and when I try to turn on does not show image Do you know what it can be?

Great video as always

@Tronicsfix

7 ай бұрын

Thanks!

you were using the nice automatic screw driver before ifix, wish you still did.

Like your channel, but does thermal paste made in 2019 cause problems

Glad it worked out

What solution do you use in your ultrasonic cleaner for electronics?

I got a switch lite that I stopped using for maybe 3 weeks, tried turning it on, nothing. Plugged in the charger for it and blue screen. Already tried applying pressure to the APU and RAM but nothing. There is one thing to note however, there is a particular spot in the switch that gets really hot. At 21:51, the MAX77812 is what seems the hottest. What can I do in this situation?

Great video I always need to pick me up when watching your videos it's awesome to watch you work. Could you do me a favor until I fix it to start carrying screw kits for the new modern 3DS systems.

The 2nd one looked so clean after the shell swap

great job man

@Tronicsfix

7 ай бұрын

Thank you!

Just wanted to post this and see if anybody has any feedback. My switch lite is the pokemon edition and I hardly used it but lately as I started it back up it seems to go from 100% to 15% in about 2 hrs so having to recharge in-between or while playing sucks. Has never been dropped or liquid damage either and still looks new out the box. My brightness is always kept to 50% and volume to mute or very low. Would a battery from a OLED make a difference? Or can some settings cause this. I'm tempted to sell it and just get a OLED Model.

I got a switch lite for 10 bucks but it has the blue screen of death. Any tips on how to diagnose the cause of problem. Thanks. Love the channel.

i always find it hard to use pliers to remove connectors like that. it's hard to get the right amount of pressure. i worry that I will slip off and scrape something off the board. I find it a lot easier to use my nails to lever each side out gradually.

Awesome video as always!

At 21:50 you're asusming that this capacitor is there for decoupling, but not all capacitors play this role. In this instance it's a buck converter so it requires an inductor and a capacitor to oscillate (aka LC circuit) so if the capacitor is not there it won't provide any current to the main chip. That could be almost any power rail, core, IOs, memory,... more likely a low-power rail considering the size of the capacitor.

Good job mate 👍

For Switch Lite B, it would be even nicer if you replace the shell with the transparent one 😀

Have you ever tried using conductive paint to repair ribbon cables?

Steve, challenge to get a return electronic box and try to fix them... 😁👍🏻

Oh i love all of your videos...wish can have one of that console :)