THE 3D PRINTER REVIEW SHE TOLD YOU NOT TO WORRY ABOUT

@criticalcarl5901

3 жыл бұрын

I am a gentleman. I would never make ANY lady worry. 👑

Where's this guy been all my life??

@criticalcarl5901

3 жыл бұрын

Right here

@jakechisholm1363

3 жыл бұрын

That’s a secret only a secret few of us know

I literally made a bunch of trees with a hot glue gun. Just shoot lines of hot melt glue over a wireframe and bulk out the tree. once it's dry paint it with a mix of spackle, glue and chinchilla duST. then paint it when its dry! also loads of people blast hotglue in silicone molds because it takes shapes so well. very common practice in cosplay.

Was going to wait until the Elegoo Saturn came out later this year, but now I'm convinced - The Sears Automatic Glue gun is my next printer for sure

@3DPrintedTabletop

3 жыл бұрын

Comment of the year, Ibis. Plz do not die of rabies

LOL too funny. I need a Carl hanging out at my house 3d printing stuff for me :D

@3DPrintedTabletop

3 жыл бұрын

He's gotta be good for something at least :D

This my favorite 3d printing channel without a doubt.

So, it's been 10 months .. I am still getting artifacts in my prints, where the previous layers are remelting as the new layer is going down. Also I am having to use 12 fans and a swamp cooler to cool the model, and keep it from oozing. My hot end has gone out from the constant use, and I can't find a replacement, so I think I am just going to set this down for a while and come back to it I'm a few months. Overall, the experience has been ... Well I've gained a lot of perspective. The technology has come a long way, and it was nice to take that first step for myself and see first hand the hurdles that had to be overcome. Would I recommend this to friends and family? Definitely, I mean... If you want to really appreciate 3d printing, you've got to spend atleast a few months pumping sticks.

Pure gold. Also, I can't wait for Vol. 2, those models looks Sha-weet!

To my friends who don't do 3D printing, I usually to describe FDM printing as a fancy glue gun.

"I like this preview hole, this is just giving us a taste" gave me a very big laugh

Critical Carl reminds me of my step bro, who drivers a bus part time and will give you 5$ if you eat a hot glue stick, 10$ for a glitter one. These dudes are so cool!

This was just what I need in my life today. Thank you.

"Okay we're not hot enough yet! 8C" was a great moment

What you have on Kickstarter is pretty awesome. Any suggestions for a 3D printer for under 400? Would like to buy one but unsure of what to buy. Definitely the ones that require filament.

I think the stringing would stop if you changed the hand settings to auto and then set your eyes to 5x magnification, that should help

I had the same feeling about 2-3 weeks ago when my mom asked me to check and repair a hot glue gun, only trouble making it a 3d "functional" printer would be to get a really big spool :D

Did anyone else ever try something akin to this as a child when they found their mom's hot glue gun? I totally made little sculptures out of hot glue. I discovered that after it cooled you could put another layer on top, and it became a challenge to see how tall it could get and what sorts of shapes I could make. Mom was not happy though because I used like half her box of glue sticks and hadn't asked first... Also glue guns are really hot (especially the 80's ones, omg), and 7 year olds should *not* use them without supervision. It's kind of a small miracle I didn't badly burn myself or melt the carpet in my bedroom.

This is great for making props. Just cut off the plug, sleeve up the cable and attach it to an "energy pack" and slap on some paint and you got a decent spacegun.

The quality could be better, but you didn't turn on the part cooling fan. It started at 10:44 but then went off.

You did make me giggle a couple of times, good one :-)

Hilarious, Danny! You ought to have that guy with the sunglasses on all the time. As long as he doesn’t break anything!😉

Best video of 2020

@criticalcarl5901

3 жыл бұрын

I agree

Came for the cool shades, was not disappointed!

Little early for an April fools video don’t you think XD?

@3DPrintedTabletop

3 жыл бұрын

If this is Carl in September, imagine him on 4/1 😇

looks like filthy frank's mild mannered sidekick. :D

Teach me, Carl!

@criticalcarl5901

3 жыл бұрын

Ok

You made my day, Carl! :D

Carl is the hero the people need

Lol I remember when I was I my teens making terrible molds and using my mom's hot glue gun

Ooooh big hype for lost adventures vol 2!

Best 3d printer review of all time.

Don't get me wrong Danny is usually my favourite 3D printing KZreadr, but Carl may just be superior.

I had to check the date and verify it wasn't April 1st.

Support the Channel! 🎁 Uncharted Lands Late Pledges: 3dpt.me/uncharted-late-pledge ⚠ Pick up Previous Late Pledges: 3dpt.me/late-pledges 🏆 Become a Patron: 3dpt.me/support

My sense of time is completely shot. Is it April 1st already?

The founder of Stratasys was also inspired by gkue guns from the 60s/70s

@3DPrintedTabletop

3 жыл бұрын

There's always a little bit of truth in the crazy stuff that comes outta Carl's mouth. Just a bit :D

I would love to see you using a EasyThreed

OG 3D print pen 🤣

This video is fucking amazing.

And to believe I know this guy

cant believe me mind that I know him in irl

I can't believe I actually watched the whole thing lol

@3DPrintedTabletop

3 жыл бұрын

Sounds like you're ready to add a new vintage 3D printer to your budget crafting arsenal ;)

Dangit Carl!

you could of course strap that thing to an ender3 and have a go....

DANNY THIS IS URGENT THE PHOTON RESIN PRINTER YOU SHOWED OFF LIKE 2 YEARS AGO ONLY COSTS $200 ON AMAZON

This is a much copied design. I just bought one a few months ago and that one has a PTFE coated nozzle, automatic retraction for better ooze control and it allows for the use of large (10") sticks of filament for endless printing. Best of all: no need to do any CAD designs, "print in place" for quick repairs like a plug or a broken latch on a piece of equipment. Easy to expand build volume by using an extension cord, unlimited (only limited by the space you have), no layer adhesion problems, no warping etc. etc. Forget about UltiMaker, Creality or any of the other brands. If you van just buy one 3D printer, this is the one to buy !

LOL! "preview hole".

Preview hole FTW 🤣

So like...where is Carl’s channel? 😂

i learned something from you!

you seriously ebay'ed the glue sticks?! ROFL

Good video!

It's not April 1st yet mate...

brill

Omg this was priceless

Omg i have one of those

Has anyone told you that you look really similar to Carl? You might be related or something.

This was your dumbest but by far your funniest video

Lol, Danny (I mean Carl) you are hilarious! "WOW"

Wtf are those glasses lmaooo

hmmmm not get that red colour lol

🤣🤣🤣

😂🤣🤪

First|!

This is the second video this week that is supposed to be funny but I'm just sitting here like "why does this exist?" This year broke me...

...so an old glue gun?