A quick 5 channel Amp install in a Ford f150 full install
Жүктеу.....
Пікірлер: 96
@MidMadn9 ай бұрын
You have just the right amount of OCD and perfectionism. If I ever win the lottery - I'm coming to Florida to get you to fix/upgrade the tunes in my 2019 F150 XLT.
@johnskedgell4052 жыл бұрын
For what it’s worth…. I love F150 vids
@MrALAVOL992 жыл бұрын
I love watching you guys do installs it's like a new TV show every time keep them coming please
@van_mod1 Жыл бұрын
Seriously have never learned as much about how to do a car audio upgrade as I learned from this vid. Super well done.
@bkrgls2 жыл бұрын
👍🏾Great video! Like the old saying goes, "When you're having fun or enjoying something, time flies!" Those 47 minutes of video passed by quickly.
@investinghutler5323 Жыл бұрын
Wow definitely one of the best car audio channels on KZread hands down!!! I wish you were in Dallas I would spend my money with you! Keep it up 👍
@shawnsanderson36958 ай бұрын
I really appreciate the way you show us all the ways you've thought it out and what you've done to make it easier and the process nice and well built It must take a lot to do all that and show people again thank you.
@wg5768Ай бұрын
The best car stereo installers on KZread!
@graygoose8938 Жыл бұрын
I love the detail you guys put in your installs. Like amp installs and wiring and the attention to detail is superb.
@speedpros2 жыл бұрын
Great great video with alot of no sweat details just like when we were at the expo, I know the manufacturers and also customers appreciate that you have a vast knowledge of the equipment, design and lil details for everyone that they getting a proper representation of industry equipment and customer service
@11deelove2 жыл бұрын
You guys are true professionals. Great job on the video.
@dougmacrae9535 Жыл бұрын
Always fun to watch you guys put all that stuff together. thanks
@marc35812 жыл бұрын
Sure wish I had more experience and knowledge you guys make it easy to install.
@carsonhall Жыл бұрын
Such a clean install!
@mike_saw_75632 жыл бұрын
Great video! Would really like to see an install on a 21 Silverado 1500 w/o Bose. Looking to upgrade mine and still trying to figure it all out.
@Herejustforfun5242 жыл бұрын
Always super clean builds!! I Love It.
@daviddeese41613 ай бұрын
I recently did a loc and amp install in my 2015 f150. You hit on an important aspect if the install in this video but I was hoping you could go a little deeper into the subject. The subject is how the power turns on as soon as the doors are opened. This signal is amplified as well and I'd like to be able to turn it down. It creates a stable white noise that isn't changed with volume adjustments. I have Forscan if that helps, but I'm hoping you could shed some light on the matter. I did have to disable the fake engine noise with Forscan and am hoping there is a setting to change. Thanks.
@gavinjohnson48792 жыл бұрын
Man I love the content! So awesome and informative 👌
@chanceehuiet Жыл бұрын
What's with the mickey head and the "up" balloons?
@countrystudtv7924 Жыл бұрын
I wish I had the money to do all this stuff love the videos
@mr.bigs76522 жыл бұрын
For the tweeter being wrong, check the wire color not the heat shrink. Thats y it was backwards
@mr.bigs76523 ай бұрын
The wire colors are backwards. U put black heatshrink on the grey wire and red heatshrink on the purple wire, DEAN. watch the video again and look
@vicmoreno70172 жыл бұрын
Does this install work for a 2022 F-150 with Sync 4 radio (no B&O, just the basic)?
@isaacparras77725 ай бұрын
Clean as always. But I don’t know why I hate that yellow ground cable. It bugs me so much 😂😂
@Jamez842 жыл бұрын
If most manufactures dyno test their amps and were HONEST about the power ratings, all those amp dyno videos wouldn't be so popular.
@mr.ford-man44812 жыл бұрын
I've had other pros in your same field tell me that load generating devices aren't necessary on a non B&O f150 system. I've also heard that audio control doesn't even make one that produces the correct load for a Ford even if they did need one. Have you guys tried it with and without on an F-150?
@nigga7387
Жыл бұрын
did you ever figure it out?
@bojangles_bonjangles8000
5 ай бұрын
@@nigga7387curious as well
@theale1 Жыл бұрын
The blue ac-lgd does not works on 2021 f150, power cuts at around 20 and smd dd1 always flash on distortion light.
@ALEX-xd7ko2 жыл бұрын
That plate behind the dash is killing my o.c.d ... square it up. 🤪😜
@shawnsanderson36958 ай бұрын
Is that the aftermarket harness your pulling apart or it came out of the factoy setup?
@haystack17 Жыл бұрын
Define quick..... haha Lots of good info.
@makecrimeillegal43089 ай бұрын
Yo, maybe im just smooth brained, but Would you mind clarifying where the 2 sets of speed wire plug into?
@noahbarnard49075 ай бұрын
Where are you located at and what do you charge for install ?
@941wraps Жыл бұрын
I have a 2018 lariat f150 with the b&o audio. Do I need the same LGDs and T harness? I want to upgrade the speakers and put subs in.
@r_p_m73302 жыл бұрын
Old install. Can now get that clean pre-out with Forscan and soldering on RCAs directly to your speaker wire output. Couldn't ask for an easier cheaper system to integrate into.
@javielitous
2 жыл бұрын
more info on the clean pre-out and forscan
@r_p_m7330
2 жыл бұрын
@@javielitous if you have a base radio in a Ford. You can use Forscan to reprogram vehicles ACM to send out a 4 volt clean output like hooking up a Zen or Pac Pro to a premium system.
@javielitous
2 жыл бұрын
@@r_p_m7330 so is it like uploading a new firmware or just an option on the "as built"?
@r_p_m7330
2 жыл бұрын
@@javielitous You just change the Audio Control Module by changing a few numbers and letters in a sequence
@thejalderman Жыл бұрын
Is there a way to keep the fake engine growl on the f150? I have a 2018 F150 with 501a package. That’s the B&O factory stereo with sub behind seat. I have an aftermarket amp powering my aftermarket sub added on and still have the factory sub behind driver side seat. I want to take factory sub out to make room for an amp rack to drive new door speakers. I actually want to keep the engine growl. I’m curious if the aftermarket sub amp could pick up that signal? I plan on adding an LC7i when I get the door speakers and amp.
@jamestaylor50072 жыл бұрын
Hey guys not sure if a response will come but I will try anyways.... 2021 Telluride looking to add 8inch sub & amp to premium sx Hrmn&Kardn which has a sub already installed... can you tell me what I need for this process ... want stock mids/louder is this possible without upgrading door components ?
@SmackedInATL2 жыл бұрын
High level to LC6i to amp for me
@fnickc Жыл бұрын
All in with labor what would this cost?
@treyporras082 жыл бұрын
I thought for the ford 150 we need the LGD green? How would I know if I would need the LGD blue?
@jmcguire7082 жыл бұрын
Dean, Does the Q Series amps not have the built in load for high level? I know that they added that feature to the KX series amps once they turned black, seems weird their premium option would have that removed.
@justgoofingoff Жыл бұрын
Hoping you reply or someone will....But where did you get the T harness?
@rathanaveasna44952 жыл бұрын
Hi can i use a 5 channel amp in my 2017 f150 using a dsr1 and Fo2 to power my front components and rear coaxial and sub?
@billgates38997 ай бұрын
Okay so where do I get this Axxess T harness?
@leesmith-rv1rf Жыл бұрын
I am curious how much to you charge for this installation.
@TheLawlessGang Жыл бұрын
how much power can i run with the stock eletrical and a good agm upfront i have the same truck
@berkeley5104 Жыл бұрын
Did you use a line output converter
@danielbaer2582 Жыл бұрын
So would I need the LGD for a 2016 lincoln mkz? It has the 8” screen non branded. I have a dsr1 coming and I’m planning on installing deaf bonce 6.5 Sylvester’s and tweets on a deaf bonce ab400.4. If I do need the LGD would I need a set for front and rear?
@danielbaer2582
Жыл бұрын
Also I’m not seeing a T harness available for my car but was wondering if the be for the Ford fusion would be the same
@luisorozco9170 Жыл бұрын
Would this harness work with the 21? F350
@sheikhdaif4608 Жыл бұрын
did you remove the factory amp entirely ?
@DcComplete Жыл бұрын
Do you have video on 2019 explorer xlt?
@josemerchant11ify Жыл бұрын
How much is this set up ?
@daveroski Жыл бұрын
Does anyone know what year and engine this has? Wonder if the owner can reply :)
@hyoctane23 Жыл бұрын
Any chance you still have that APIM harness?
@duarte_nation47792 жыл бұрын
Wats the name of the plastic
@dougmacrae9535 Жыл бұрын
Where in Fla. are you located?
@Jayrodnails Жыл бұрын
Are you able to do the same but run a amp for subs a amp for door speakers and a epicenter with this set up for the stock stereo?
@FiveStarCarStereoInc
Жыл бұрын
Yes
@Jayrodnails
Жыл бұрын
@Five Star Car Stereo what would I need if I'm not running that amp but a skar 2500rms a skar 400 rms and a audio control epicenter. Would I need a dsp ? And if so how many channels
@chuckvitale175110 ай бұрын
I want you guys to do my f150
@smokedevil4u2 жыл бұрын
man i could have used you befor i gave up putting in my system i never seen those metra turbo 2 kit lol i still dont understand lol
@mr.bigs765211 ай бұрын
Low was 5 volts Dean not 10
@bigeasy2187 Жыл бұрын
what about a frame ground? bolt the ground to the frame?
@FuckYouTubeCensorship2024
5 ай бұрын
Battery, engine block, or alternator ground is best. Frame has welds and rust that adds resistance. You have to remember, dc doesn't stop at ground point. It has to go through the frame or where it is grounded to get back to the power source. To complete the circuit.
@Jamez842 жыл бұрын
I hate fake engine noise
@luisgomez22402 жыл бұрын
Man i wanted this guy to do my install but 2k plus miles away from me 😭
@kevindietiker78872 жыл бұрын
Hi I have a 2022 f150 supercrew. Just curious on what the cost is to have something like this done if you don't mind saying. If you don't want to I understand.
@aryehcohen4403
2 жыл бұрын
Installation about $2k-2500
@kevindietiker7887
2 жыл бұрын
@@aryehcohen4403 thanks for the information.
@melissathompson7229
2 жыл бұрын
$2k to $2.5k would be just labor not including parts I'd guess
@aryehcohen4403
2 жыл бұрын
@@melissathompson7229 yes just labor
@michaelcaplinger51155 ай бұрын
I don’t trust any audio shop around me. For some reason I doubt they go this route
@masonwilliams18102 жыл бұрын
Do you think the new ford bronco sport with B&O system needs a load resistor??
@evanpainter3482
Жыл бұрын
Your bronco will blow an engine soon
@masonwilliams1810
Жыл бұрын
@@evanpainter3482 make your way back to Facebook old man
@evanpainter3482
Жыл бұрын
Look it up Scotty was talking about it
@masonwilliams1810
Жыл бұрын
@@evanpainter3482 old men listen to old men, makes sense. Times are changing
@evanpainter3482
Жыл бұрын
@@masonwilliams1810 the sleeves from the lifters are falling into the motors
@alextrainor25522 жыл бұрын
Do you need a dsp for an aftermarket radio that has a 13 band eq?
@duzzah
2 жыл бұрын
No. It's not required. But they do add extra features, like running more than 6 channels (ie full active fronts plus rear speakers), more control over time alignment, more points to adjust on the eq etc.
@vcjester
2 жыл бұрын
Adding onto what Durham said, proper time alignment adds something special that I can't explain. If you've never had it, you won't care. Once you've had a system with proper time alignment, you can never go back.
@SeanOMatic2 жыл бұрын
Very nice, very evil!
@ehloehl1664 Жыл бұрын
2 hours later he installs
@user-jd6dh7xr3n Жыл бұрын
ارجو ترجمة بالغة العربية
@nelson32 Жыл бұрын
Love your video but your explanation of what you are doing between minutes 18:00 and 22:00 is about as clear as mud..
@FuckYouTubeCensorship2024
5 ай бұрын
😂 it was very clear.
@hitechburg2 жыл бұрын
ANC = ACTIVE NOISE CANCELLATION
@donearl66752 жыл бұрын
👍😍👍❗
@KHH-87 Жыл бұрын
T R U C K !! It’s not a car………🤦♂️. Other than that, y’all are great!
Пікірлер: 96
You have just the right amount of OCD and perfectionism. If I ever win the lottery - I'm coming to Florida to get you to fix/upgrade the tunes in my 2019 F150 XLT.
For what it’s worth…. I love F150 vids
I love watching you guys do installs it's like a new TV show every time keep them coming please
Seriously have never learned as much about how to do a car audio upgrade as I learned from this vid. Super well done.
👍🏾Great video! Like the old saying goes, "When you're having fun or enjoying something, time flies!" Those 47 minutes of video passed by quickly.
Wow definitely one of the best car audio channels on KZread hands down!!! I wish you were in Dallas I would spend my money with you! Keep it up 👍
I really appreciate the way you show us all the ways you've thought it out and what you've done to make it easier and the process nice and well built It must take a lot to do all that and show people again thank you.
The best car stereo installers on KZread!
I love the detail you guys put in your installs. Like amp installs and wiring and the attention to detail is superb.
Great great video with alot of no sweat details just like when we were at the expo, I know the manufacturers and also customers appreciate that you have a vast knowledge of the equipment, design and lil details for everyone that they getting a proper representation of industry equipment and customer service
You guys are true professionals. Great job on the video.
Always fun to watch you guys put all that stuff together. thanks
Sure wish I had more experience and knowledge you guys make it easy to install.
Such a clean install!
Great video! Would really like to see an install on a 21 Silverado 1500 w/o Bose. Looking to upgrade mine and still trying to figure it all out.
Always super clean builds!! I Love It.
I recently did a loc and amp install in my 2015 f150. You hit on an important aspect if the install in this video but I was hoping you could go a little deeper into the subject. The subject is how the power turns on as soon as the doors are opened. This signal is amplified as well and I'd like to be able to turn it down. It creates a stable white noise that isn't changed with volume adjustments. I have Forscan if that helps, but I'm hoping you could shed some light on the matter. I did have to disable the fake engine noise with Forscan and am hoping there is a setting to change. Thanks.
Man I love the content! So awesome and informative 👌
What's with the mickey head and the "up" balloons?
I wish I had the money to do all this stuff love the videos
For the tweeter being wrong, check the wire color not the heat shrink. Thats y it was backwards
The wire colors are backwards. U put black heatshrink on the grey wire and red heatshrink on the purple wire, DEAN. watch the video again and look
Does this install work for a 2022 F-150 with Sync 4 radio (no B&O, just the basic)?
Clean as always. But I don’t know why I hate that yellow ground cable. It bugs me so much 😂😂
If most manufactures dyno test their amps and were HONEST about the power ratings, all those amp dyno videos wouldn't be so popular.
I've had other pros in your same field tell me that load generating devices aren't necessary on a non B&O f150 system. I've also heard that audio control doesn't even make one that produces the correct load for a Ford even if they did need one. Have you guys tried it with and without on an F-150?
@nigga7387
Жыл бұрын
did you ever figure it out?
@bojangles_bonjangles8000
5 ай бұрын
@@nigga7387curious as well
The blue ac-lgd does not works on 2021 f150, power cuts at around 20 and smd dd1 always flash on distortion light.
That plate behind the dash is killing my o.c.d ... square it up. 🤪😜
Is that the aftermarket harness your pulling apart or it came out of the factoy setup?
Define quick..... haha Lots of good info.
Yo, maybe im just smooth brained, but Would you mind clarifying where the 2 sets of speed wire plug into?
Where are you located at and what do you charge for install ?
I have a 2018 lariat f150 with the b&o audio. Do I need the same LGDs and T harness? I want to upgrade the speakers and put subs in.
Old install. Can now get that clean pre-out with Forscan and soldering on RCAs directly to your speaker wire output. Couldn't ask for an easier cheaper system to integrate into.
@javielitous
2 жыл бұрын
more info on the clean pre-out and forscan
@r_p_m7330
2 жыл бұрын
@@javielitous if you have a base radio in a Ford. You can use Forscan to reprogram vehicles ACM to send out a 4 volt clean output like hooking up a Zen or Pac Pro to a premium system.
@javielitous
2 жыл бұрын
@@r_p_m7330 so is it like uploading a new firmware or just an option on the "as built"?
@r_p_m7330
2 жыл бұрын
@@javielitous You just change the Audio Control Module by changing a few numbers and letters in a sequence
Is there a way to keep the fake engine growl on the f150? I have a 2018 F150 with 501a package. That’s the B&O factory stereo with sub behind seat. I have an aftermarket amp powering my aftermarket sub added on and still have the factory sub behind driver side seat. I want to take factory sub out to make room for an amp rack to drive new door speakers. I actually want to keep the engine growl. I’m curious if the aftermarket sub amp could pick up that signal? I plan on adding an LC7i when I get the door speakers and amp.
Hey guys not sure if a response will come but I will try anyways.... 2021 Telluride looking to add 8inch sub & amp to premium sx Hrmn&Kardn which has a sub already installed... can you tell me what I need for this process ... want stock mids/louder is this possible without upgrading door components ?
High level to LC6i to amp for me
All in with labor what would this cost?
I thought for the ford 150 we need the LGD green? How would I know if I would need the LGD blue?
Dean, Does the Q Series amps not have the built in load for high level? I know that they added that feature to the KX series amps once they turned black, seems weird their premium option would have that removed.
Hoping you reply or someone will....But where did you get the T harness?
Hi can i use a 5 channel amp in my 2017 f150 using a dsr1 and Fo2 to power my front components and rear coaxial and sub?
Okay so where do I get this Axxess T harness?
I am curious how much to you charge for this installation.
how much power can i run with the stock eletrical and a good agm upfront i have the same truck
Did you use a line output converter
So would I need the LGD for a 2016 lincoln mkz? It has the 8” screen non branded. I have a dsr1 coming and I’m planning on installing deaf bonce 6.5 Sylvester’s and tweets on a deaf bonce ab400.4. If I do need the LGD would I need a set for front and rear?
@danielbaer2582
Жыл бұрын
Also I’m not seeing a T harness available for my car but was wondering if the be for the Ford fusion would be the same
Would this harness work with the 21? F350
did you remove the factory amp entirely ?
Do you have video on 2019 explorer xlt?
How much is this set up ?
Does anyone know what year and engine this has? Wonder if the owner can reply :)
Any chance you still have that APIM harness?
Wats the name of the plastic
Where in Fla. are you located?
Are you able to do the same but run a amp for subs a amp for door speakers and a epicenter with this set up for the stock stereo?
@FiveStarCarStereoInc
Жыл бұрын
Yes
@Jayrodnails
Жыл бұрын
@Five Star Car Stereo what would I need if I'm not running that amp but a skar 2500rms a skar 400 rms and a audio control epicenter. Would I need a dsp ? And if so how many channels
I want you guys to do my f150
man i could have used you befor i gave up putting in my system i never seen those metra turbo 2 kit lol i still dont understand lol
Low was 5 volts Dean not 10
what about a frame ground? bolt the ground to the frame?
@FuckYouTubeCensorship2024
5 ай бұрын
Battery, engine block, or alternator ground is best. Frame has welds and rust that adds resistance. You have to remember, dc doesn't stop at ground point. It has to go through the frame or where it is grounded to get back to the power source. To complete the circuit.
I hate fake engine noise
Man i wanted this guy to do my install but 2k plus miles away from me 😭
Hi I have a 2022 f150 supercrew. Just curious on what the cost is to have something like this done if you don't mind saying. If you don't want to I understand.
@aryehcohen4403
2 жыл бұрын
Installation about $2k-2500
@kevindietiker7887
2 жыл бұрын
@@aryehcohen4403 thanks for the information.
@melissathompson7229
2 жыл бұрын
$2k to $2.5k would be just labor not including parts I'd guess
@aryehcohen4403
2 жыл бұрын
@@melissathompson7229 yes just labor
I don’t trust any audio shop around me. For some reason I doubt they go this route
Do you think the new ford bronco sport with B&O system needs a load resistor??
@evanpainter3482
Жыл бұрын
Your bronco will blow an engine soon
@masonwilliams1810
Жыл бұрын
@@evanpainter3482 make your way back to Facebook old man
@evanpainter3482
Жыл бұрын
Look it up Scotty was talking about it
@masonwilliams1810
Жыл бұрын
@@evanpainter3482 old men listen to old men, makes sense. Times are changing
@evanpainter3482
Жыл бұрын
@@masonwilliams1810 the sleeves from the lifters are falling into the motors
Do you need a dsp for an aftermarket radio that has a 13 band eq?
@duzzah
2 жыл бұрын
No. It's not required. But they do add extra features, like running more than 6 channels (ie full active fronts plus rear speakers), more control over time alignment, more points to adjust on the eq etc.
@vcjester
2 жыл бұрын
Adding onto what Durham said, proper time alignment adds something special that I can't explain. If you've never had it, you won't care. Once you've had a system with proper time alignment, you can never go back.
Very nice, very evil!
2 hours later he installs
ارجو ترجمة بالغة العربية
Love your video but your explanation of what you are doing between minutes 18:00 and 22:00 is about as clear as mud..
@FuckYouTubeCensorship2024
5 ай бұрын
😂 it was very clear.
ANC = ACTIVE NOISE CANCELLATION
👍😍👍❗
T R U C K !! It’s not a car………🤦♂️. Other than that, y’all are great!