Parts used and recommended linked in the description of the video!

About time somebody who actually explains their work, I doubt I'll need to watch other videos of urs for a long while.... but can't help but subscribe for sombody who actually explains stuff while showing u at the same time unlike other videos lol. Great work, I've always wondered how to wire the wires so clean cool to see it's simple as a piece of plastic. Amazing work!

Wild the amount of work that goes into this. I think I’d end up replacing all the speakers at once if I did it myself, so I wouldn’t have to mess with it again😂

Thank you for this video. Will be my next chore on the 2023 F150.

perfect timing man. Just started working on my F150 lightning XLT and this video popped up. you are the best.

@LongNguyen-dd6tz

2 ай бұрын

I am learning his awesome video, I got a pro lightning, do I need to put a new amplifier to make the sound better?

@LongNguyen-dd6tz

2 ай бұрын

Yes he is the best, I learn to replace the new speaker from his tutorial video

@TheHardatoenail

Ай бұрын

@@LongNguyen-dd6tzI have lightning xlt. Put in a kicker key 200.4 to power front component speakers (tweets in a pillars) and rear coax speakers. Also adding a key 500.1 and the sub box used in this vid for lows. Sounds great so far. Can’t wait for the subs.

Did you have to disconnect the rear secondary battery as well during installation?

What is that black ribbed tubing encasing the power that went thru the passenger firewall grommet?

Can you show both the amp settings and head unit settings you used for tuning. I used a scosche loc and different amp but don’t get ground shaking bass.

Awesome install!! Where do you get your custom heat shrink from?

@ProvoBeastAudio

6 ай бұрын

Wirecare!

Awesome video! I’m going to follow this to do an install in my F150. One question, though. How did you mount the bass knob?

@ProvoBeastAudio

5 ай бұрын

Stinger amp has allows you to easily flush mount it. Just drill a small hole, includes a nut and washer to mount it, add the plastic knob. Makes for a nice clean install.

@kyanderson9429

5 ай бұрын

Thanks for the response. Should’ve waited for my parts to arrive before I asked! Again, very helpful video and thank you!

Where does the bass control knob go hooked up to?

What size bolt was used for the ground wire?

is there a tutorial on how to connect the output converter without the harness?

does this install work exactly with the F150 Lightning? Attaching it to the 12v battery in the frunk and the same ground in the back? I also have the XLT version of the lightning. Great video overall!

@ProvoBeastAudio

5 ай бұрын

Yep, same principle!

Is signal correction needed with a non b&o system?

In place for the line out converter in the video can use the lc2i?

Question for ya guys i just had a skar audio underseat subwoofer and amp installed on 2023 ford f150. On this install does the amp stay powered on and lite up a few minutes after the truck is off. I was told this is normal because the Radio stays powered up after vehicle is off. This worries me cause I don't wanna run my battery down.

Could that pac harness be used in the same way to use a Hertz S8 DSP? Or any DSP instead of using the line out converter?

@ProvoBeastAudio

6 ай бұрын

Yeah, those Pac T harness are great for that. This pac harness is for non-B&O trim, so if that applies to you, it will work great (linked in description)

Hi! I’m planning on running a high level input from this same harness to a powered subwoofer, so I don’t think I need a LOC, but is there a way to get a remote turn on wire from the T harness? I’m confused by that.

@ProvoBeastAudio

5 ай бұрын

There is no remote / accessory wire at the factory radio as it's all controlled by data. If you need a remote turn on (and your amplifier doesn't have any DC offset capabilities through the high level input), you will have to go to the fuse box or an accessory source for switched accessory power for your amp. Honestly, the Pac module is the easiest route.

That’s thin abs I made mine out 1/4” for my trunk factory location mounting my amp didn’t want it rattling

@ProvoBeastAudio

6 ай бұрын

no rattles here.

So I have a 2017 f150 xlt, it has a upgraded sync 3 screen unit will this wiring harness not work with this, if not what other harness should I use I been trying to find one for a long while but can't seem to find anything that's as simple as this harness. Any pointers?

@ProvoBeastAudio

5 ай бұрын

For the 2017, you need the Pac LPH-FD21 version of the harness (non-B&O): amzn.to/3SFiKq4

are the load resistors not required when adding just a mono amp and subs?

@ProvoBeastAudio

5 ай бұрын

Nope! Load resistors are only needed if rerouting your audio signal from that radio to an amplifier (instead of the speakers). The OEM radio needs to see a load to function correctly, hence why we add those resistors when sending the radio's signal to a multi-channel amplifier. For just a mono, since the speakers are still connected to the radio and we are just borrowing signal for our setup, no resistors are needed.

Hello I have a question. Will a capacitor or high output alternator or larger battery be needed for a sound system under 1000 watt’s rms? Thanks

@ProvoBeastAudio

4 ай бұрын

A healthy battery is all thats needed. IF worried for something under 1000w RMS, considering doing a big 3 upgrade (video on channel).

would this be same for bronco sport? cause i have the door speakers just maybe need amp and sub box

@ProvoBeastAudio

6 ай бұрын

Yes, shame harness and technique, although this box is made just for this F150.

What size was the bolt hole you used for the ground?

@TheHardatoenail

Ай бұрын

That’s what I need to know!

Question will this harness work on a F150 2023 XL with a 8in screen? Curious cause the harness listed now looks a tad bit different then what you have in the video. Just a new model?

@TheHardatoenail

Ай бұрын

Pull the radio and see what connector it has. Just a few screws and trim pieces.

Isn't the F-150 cab aluminum? Do you need to ground back to the battery properly?

@jdsuarez1211

3 ай бұрын

thats what i was thinking too

@jdsuarez1211

2 ай бұрын

there is a factory ground location behind the carpet behind the seat on the top right i believe. it should be a solid ground location

Thanks for the video. Kinda surprised since you went with a 1 Ohm connection with the amp to not include a capacitor to help with any power surges. You did go with a 2 driver sub system around 1000 watts, that's going to pull some amps. Whenever I install a 2 driver sub I like to include a Capacitor for peace of mind.

@ProvoBeastAudio

5 ай бұрын

most capacitors are worthless. If you need help with voltage drops and current needs, you are much better off upgrading your battery under the hood, doing a big 3 upgrade, and if needed a second battery / super cap / isolator. Most caps on amazon are garbage (filled with sand to fee "quality"). Please don't waste your money on them.

How do you secure the amp/rack to the floor? Or is it just sitting there?

@ProvoBeastAudio

2 ай бұрын

Snagged a bolt to the side of the abs mount.

Does it have to be shallow mount subs? I have a single 12” skar sub but it’s not a shallow mount. Will I fit under the back seat?

@ProvoBeastAudio

2 ай бұрын

All depends on the box you install.

@bawfitness

2 ай бұрын

@@ProvoBeastAudio I got the pre made box from skar for a single 12. But I don’t know if it’s made for a shallow mount or not. But it’s made for my f 150 it says

How does a system like this cost for equipment and labor in total?

@ProvoBeastAudio

5 ай бұрын

All parts we used are linked in the description of the video for prices. As for labor every shop differs so you may need to call around.

@firetigermoonchild

5 ай бұрын

I'll check them out thanks. Great work

I have a kicker kISLOC2 LOC, it does not have a yellow wire, only has four speaker wires a ground wire, and a blue remote wire. Will this work with the set up? Thank you

@tannerbelke8885

Ай бұрын

Yes it will work

Hey man I’m looking to add an amp and a double sub setup under the back seat of my truck. Do you have a social media email so I can send pictures without having to give away ur personal email? It’ll just be easier for me to send you the links on amazon/send you photos of what I’m about to order.

@ProvoBeastAudio

6 ай бұрын

Facebook / Instagram.

@Lilquixx

6 ай бұрын

@@ProvoBeastAudio are yall in Provo Utah?

@Lilquixx

6 ай бұрын

@@ProvoBeastAudio Nevermind I see you guys are in Lehi! Hello from Ogden! But I messaged you on instagram!