didn't know Zach could get sick, I thought Zach was this all know demi-God with beautiful luxurious hair and eyes.

@californiacating4690

2 жыл бұрын

He zaddy

@ABoringTool

2 жыл бұрын

What happened to him to make him such an overall good dude

@FS-uy1no

2 жыл бұрын

@TommyInnit 🅥 yo tf you doin here minecraft child?

@Cro_man_

2 жыл бұрын

@@FS-uy1no hes fake see

@bobbyboucher7426

2 жыл бұрын

ALL HAIL KING ZACH!!!

They should do an extra episode where Nolan actually finishes fabbing the sliders and skid plates for low truck. Already bought the parts after all.

@Pedrlopez

2 жыл бұрын

Yes 🙌

@Pedrlopez

2 жыл бұрын

Yes yes

@onionman500blin8

2 жыл бұрын

the sliders could have been done the same as the rear bumper and the skid plate could have been just two plates protecting the oil pan and lower part of the radiator

@georgepacheco9983

2 жыл бұрын

Like how they did the paint for the 350z, another rematch

@JavierLopez-ms9of

2 жыл бұрын

Do it @donut

i feel the low team should get enough time to actually do the mod because the whole point of a low budget is that difference in cost is picked up by the time you put it.

@jac1207

2 жыл бұрын

well, as they have stated, it's really production costs. The longer you film, the more you pay for overall production. That said, time can also be shortened if you put in more work. We've seen how much more work low team need to do, but we DON'T see if Low team had to get more people to help which might be the case.

@killeramv

2 жыл бұрын

I could imagine them doing better for the sliders, but nothing else. Still would have been good to see them finish the plans they had

@piyushverma1139

2 жыл бұрын

Welding a plate and some rods on rock slider wont increase cost dramatically 🤣also the point is comparing hi vs low how should it be compared if parts are missing

@MeepChangeling

Жыл бұрын

@@piyushverma1139 Yeah, that dosn't. BUt you know what does? Paying your stars for time on set and on camera. Paying your extras. Paying your camera guy. Paying your sound guy. Paying your editors... Do you not know anything about high-level production like this? Just because it's on KZread doesn't mean it's not done like TV is. This is far far above "guy in bedroom talking about their opinions."

@NobodyUR

Жыл бұрын

Time is money. No point in saving money if you could have made more than the cost savings on that time of course if your a 40 hr at leaster this statement doesn’t hold true

Who ever makes the animations for donut really needs a raise for helping explain difficult stuff to us especially when it comes to b2b

moment of appreciation for whoever actually modeled these pieces in 3d for the little check mark cut scenes

@Ericbuyslunch

2 жыл бұрын

they put the rock sliders on high truck on backwards. F.

@jontong2804

2 жыл бұрын

kzread.info/dash/bejne/daRrtceJhpeokrg.html

Big thumbs up for the animator, those little animated Tacomas look sweet.

@gibsonf06

2 жыл бұрын

stocky tacoma’s

@CupwakeRBLX

2 жыл бұрын

Gibby06MTB are they for sale?

@ehriq__

2 жыл бұрын

@@CupwakeRBLX I’m pretty sure they sell it where they sell their merch

@frigoff6981

2 жыл бұрын

I don't like black people

@greeezysnoblin6636

2 жыл бұрын

@@frigoff6981 crazy

In the words of AVE “A grinder and paint makes me the welder I ain’t”

@norgepalm7315

2 жыл бұрын

Wise words from an unknown man that AVE heard before and now says.

There should be a mid team where Zach just makes it how he wants it in between high and low teams budget

@ConnorDobbins

2 жыл бұрын

I mean that is basically Money Pit. Just with different cars

@namshimaru

2 жыл бұрын

Mid would always be the best

@johndayinthelife6837

2 жыл бұрын

Or at the end take all the best off and put them on 1 truck and everything else goes on the other

@jlarry1

2 жыл бұрын

I think the lesson here is we the viewer are supposed to be the mid team.

@bboynation101

2 жыл бұрын

@@jlarry1 agree we suppose to choose the best between both

"CAD, Cardboard Aid Design" is the most professional engineering hardware I've ever seen

@MasterOfTheBeef

2 жыл бұрын

As someone who fabricates often. Cardboard Aid Design is your best friend.

@appletreetroll1927

2 жыл бұрын

Cardware

@djbis

2 жыл бұрын

to think that I got a degree in this field. Only to have the computer replaced by cardboard 20 years later.

@FreeTimeFeats

2 жыл бұрын

First say this on Matt's Offroad recovery and have seen it so many more spots since then! Must work 🤷‍♂️

@thewholeinch3502

2 жыл бұрын

@@MasterOfTheBeef facts

"It's pretty bad but I'll grind it down." - Everyone who has ever welded at some point.

@forresttm

2 жыл бұрын

If it holds.. Its good. Lol

@aaronbeaupre909

2 жыл бұрын

A grinder and paint make me the welder I ain't.

@aaronbeaupre909

2 жыл бұрын

A grinder and paint make me the welder I ain't.

@DR.P3RKY

2 жыл бұрын

The metal is together that’s all that counts

@merriman420

2 жыл бұрын

I'm not a great welder, I'm a great grinder lol

Low truck DEFINITELY wins here. Looks sweet, Nolan learned some stuff, and you have pride of building it. Plus, it didn't cost nearly as much.

@gideonwaldner2670

2 жыл бұрын

No skid plate and not really rock sliders

@FullmetalC5

2 жыл бұрын

@@gideonwaldner2670 and still made it further. Low truck wins this one

@gideonwaldner2670

2 жыл бұрын

@@FullmetalC5 hey I would most likely take low truck I would just pick the solid palte and sliders from high truck

@FullmetalC5

2 жыл бұрын

@@gideonwaldner2670 oh for sure

@NaruSanavai

2 жыл бұрын

And, most importantly (especially in a serious off-roader) LoTruck is _lighter._ Most people don't think about how big a role weight plays in many aspects of it.

This episode is one of if not the best donut has ever done. Best from cast, soundtrack, editing, cinematography everything...

@harimassudoku8274

2 жыл бұрын

Woah how did u make ur username like tht?

I just can't believe how good this channel has gotten. I still miss being yelled at in Science Garage, but now I can't imagine this show without Zach.

@wpjohn91

2 жыл бұрын

What happend to that section?

@TheMorganchase

2 жыл бұрын

Ya man. I miss Bart. Very Informative.

@aftrimg

2 жыл бұрын

@@wpjohn91 Pretty sure it was a combination of having a firstborn and creative differences. I may be entirely wrong, though.

@donjohnbanuelos5941

2 жыл бұрын

Whatever happened to Bart?

@spencerbeckett6857

2 жыл бұрын

@@donjohnbanuelos5941 he moved to motortrend to work on some stuff over there

This was definitely Nolans episode. Him yelling " give her the Fucken beans James son of a bitch" made me die.

@_nuclearism3433

2 жыл бұрын

I did not expect that from him haha

@f0xbdyramirez2

2 жыл бұрын

@@_nuclearism3433 no I had to re watch it I was like who was that

@lizard_girl

2 жыл бұрын

can confirm lol. no matter the type of welding "eh I can grind it down later and make it look... nicer"

@erikalvarez4516

2 жыл бұрын

Future t-shirt if you ask me

@Cunningline

2 жыл бұрын

@@erikalvarez4516 i would buy that so fast

When it comes to armor I think DIY will always win, you can really add your own touch of creativity and personality when you fabricate your own bumpers

@beardedforlife3740

Жыл бұрын

The only way diy wins is if whoever is doing the fab work can design it properly and can weld really good.

@wolfrus1809

11 ай бұрын

DIY only wins if you have the tools to do it or have the money and a bunch of free time to do it yourself.. spending 1000-1500$ on a bumper that can be installed in an hour or 2 will win every time against buying boatloads of tools and spending weeks designing and fabricating your own

love how low truck looks like a sleeper version of an off roader with the more subtle body armor. Loving the show in Bristol, England as always!

"It's pretty bad but I'll grind it down" absolute banger of a quote

@Masteretel

2 жыл бұрын

@Jordan Winders Pretty welds just save you time on grinding which you come to appreciate later on. Keep practicing and try to fall in love with welding as much as you can.

@justy3440

2 жыл бұрын

"a grinder and paint makes me the welder I ain't" -AvE

@Erteywie

2 жыл бұрын

@@justy3440 that was gonna be my reply also.

@blacksheepcustomspa8787

2 жыл бұрын

Yea who here hasn't said that at least once lol

@Kamikaze_Samurai90

2 жыл бұрын

Grinders are a bad welders best friend

C.A.D. Cardboard Aided Design Definitely the future

@bboyect

2 жыл бұрын

As a mechanical engineering student. I can say that it is 100% true. LOL

@7_7_5

2 жыл бұрын

SOP desing, Sharpie on Paper

@jledmist87

2 жыл бұрын

Look up project Binky you don't be disappointed

@jledmist87

2 жыл бұрын

kzread.info/head/PLGSOZAHg1yQHU1tc_3Y5MTQg1qjtxA_nq

@7_7_5

2 жыл бұрын

@@jledmist87 project binky is just a whole other level, watched it since it came out

Zach is such a clutch dude, the "tell me what you need and I'll work on it" guy.

I really enjoy how the low team, always seems to think and do like a normal everyday guy on a true budget/I thought the same thing when he was building,like a weekend builder, and I enjoy how they both are honest about there reviews thanks guys

@mikewhitman745

Жыл бұрын

Just remember reviews are based on point of view. If the reviewer doesn't think like you the review won't really reflect what the product will do for you and the way you look at and use things.

I love the animated Tacoma’s! Who ever is animating them needs to stay on the team for sure haha

@Sockjock83483

2 жыл бұрын

@@jontong2804 stop

@tatewilliams9510

2 жыл бұрын

I agree!

@binchaling5258

2 жыл бұрын

He isn’t part of the team it’s a freelance job but I do agree

@ryancorbell9520

2 жыл бұрын

I agree, they are really putting in great effort in their videos!

@janduaneabong3809

2 жыл бұрын

I absoloutly agree to you

Honestly, that front "low" bumper is sick.

@kosta2177

2 жыл бұрын

I would actually prefer to have it over the expensive one considering the weight

@anthonyadverse4449

2 жыл бұрын

ARB is good for anything you can possibly hit with it... kangaroos, wombats, deer, moose, buffalo.... but not noted for prettiness, its all function

@JCintheBCC

2 жыл бұрын

The other thing that isn't mentioned about looks in the video is how much trail-cred you have for fabricating your own custom stuff. ARB is probably the most common bolt-on bumper. Works great, but is kind of boring in terms of personalization. If you make a good looking bumper and can say "I made it from scratch", that's double dope.

@TRAGICxCITYxB

2 жыл бұрын

Thought it was an Addicted Off-road tube bumper I see on other fellow 3rd Gen T4R owners shit boxes

@jasonjason6219

2 жыл бұрын

Yea I like everything on low truck better

Aaron deserves his own show. Yeah I said it.

I like the choice of custom built. It can be unique, but you can really refine the design to how you want to mix it. There is some good gear on the shelves too.

Donut should 100% make “desert ninjas” merch

@mycosys

2 жыл бұрын

or - hear me out - dessert ninjas

@ninobrown909

2 жыл бұрын

Merch is future trash.

@Daniel-vs8lw

2 жыл бұрын

@@ninobrown909 only for hokies who spend money on things they don't really want

@Daniel-vs8lw

2 жыл бұрын

I'd buy it!

@FlyingTofu

2 жыл бұрын

@@ninobrown909 i love my boost creeps hoodie and pop up up and down headlights shirts. I believe that is true for a lot of youtubers but donut’s designs are actually really nice

The fact that Low team couldn't finish their stuff in time is the epitome of DIY armor. Often it can be much cheaper, and more suited to your taste and application, but it takes A LOT of time and attention.

@lolsurprises9989

2 жыл бұрын

So to be honest, IF you place value on your TIME, DIY projects can be time intensive and therefore VERY expensive. A production fab shop can pump out these assemblies much faster than I would using the same assembly fixtures and tooling. Whatever I made for myself was far more than a production piece. They were works of art.

@CanadaBud23

2 жыл бұрын

@@lolsurprises9989 It really does depend on a person, very case by case. For me I pretty much fab everything. I find out quite often what I make is superior to what is bought/available but very focused on a specific application. While manufactured products are made to try and cover everyone's needs in the same product which doesn't always work, but that's just the nature of manufactured products and trying to make as many people as possible happy. Despite the the skill and experience I feel that I am very "cost effective" in labour. Some people think they are so valuable in time that they try to justify a very high rate and/or would put off work based on that alone. Honestly in my opinion only, I think people are only worth maybe a quarter of what they say realistically. From my perspective usually that stems from a big ego, or a large chip on their shoulder. Anyway that's what I think. With that said, with people in the "I think I can't do that" catagory, they can. And the great thing about us is the ability to want to learn. Building your own stuff is the best teaching/experience tool you can use. My favourite saying goes: How do you build a cage? -Best way is to start fukin up some tubes!

@volundrfrey896

2 жыл бұрын

@@lolsurprises9989 It's not really a question of valuing your time imo, most of us have spare time for hobbies... at least anyone who have time to watch this video does. So if you enjoy building things then that's a great hobby and use of your spare time, if you don't then it's not and you should just buy the parts. You should see it as an alternative to watching TV, not an alternative to working.

@Sn0ws519

2 жыл бұрын

@@lolsurprises9989 with the more expensive kit I'd say you're paying extra for the convenience as well. Everything is already pre-cut, measured, and all that stuff. I know for me as well I wouldn't have the patience or desire to fabricate one up myself lol

@Skooteh

2 жыл бұрын

@@CanadaBud23 it depends on the person as well. A 200$/hr dentist could also be a $3/hr welder/fabricator.

This is without a doubt one of the best series on KZread. Keep it up my dudes🤙

This is the coolest series ever! I hope they keep doing hi and low off road vehicles!

Man low team really needed to become engineers for this episode lol

@alexanderrobertson5777

2 жыл бұрын

Lmao well they put Zach the diy guy on the hi team so their just doomed lol

@wooduyal

2 жыл бұрын

Very true

@kaneki1056

2 жыл бұрын

they're gonna have to be engineers for almost everything that can be done with tubes and stuff lmao

@ZuluComander

2 жыл бұрын

But that's the fun part

@clivejuniornoconjo1556

2 жыл бұрын

If Aaron can build an FD rx7 without it ever breaking down, then he can definitely Wizz up something for Lo-team but I was kinda hoping him and Nolan would be hi-team

"Do your best, grind the rest." - Ancient Welder Proverb

@bignose4703

2 жыл бұрын

-also Tony Hawk

@corvinsmith2633

2 жыл бұрын

A grinder and paint makes me the welder I ain't - Obama or something

@dillonthomasmc3235

2 жыл бұрын

needs to be a shirt

@kangchenghoo3448

2 жыл бұрын

Thanks w1

Back in the day (30 years ago), I had a Nissan King Cab 4X4 that had a cheapie dual pipe bumper. I just tossed it in the dumpster and went open rear with the stock pan. I took it to Guam, where I was stationed in the Navy. No issues with not having a rear bumper there. Plus, it looked cleaner. Lots of climbing opportunities on the island.

Coastal is such a solid company. Welded up the rear bumper and swing outs for my 4Runner and it was a great project. Shoulda gotten a coastal for the front instead of the ARB!

If Nolan knew he had a time limit to fabrication.. i personally think he should have gotten the shipping time of High cars bumper to figure out how to make his.

@Prestiged_peck

2 жыл бұрын

Yes this would be so much more fair.

@joshuagibson2520

2 жыл бұрын

100% true.

@InertiaDriven07

2 жыл бұрын

This is true, but ARB is pre-fabbed in warehouses, coastal off-road is typically only a few days to ship since no true fabrication goes into it. 4x innovations I’m sure took a while, and it would’ve been nice to see low truck in completion. That being said, a few days at the minimum probably could’ve gotten everything done. They should do an episode 3.5 or something of that

@imthedarknight-8755

2 жыл бұрын

Yeah to do an accurate comparison I feel like you at least gotta let low truck finish, they seemed to cut a lot of corners for the sake of time. If I was actually building these for my truck I wouldn't be in some kind of filming deadline so I might take a week or 2 to build it

@beardedforlife3740

Жыл бұрын

@@imthedarknight-8755 they had time if they didn't waste it trying to make the front bumper look pretty with paint

There's a super subtle weightlifting commentator voiceover during the "get your reps in" bit and I want the editor to know that I noticed and enjoyed it that much more for being so subtle.

@thatnigga3854

2 жыл бұрын

yy

@thatnigga3854

2 жыл бұрын

ffyu

@thatnigga3854

2 жыл бұрын

@bilij pdan di

@thatnigga3854

2 жыл бұрын

@bilij pdan yfydyyu

@thatnigga3854

2 жыл бұрын

y

Love the hi lo series. Great info, original and entertaining. Keep up the great work

i'm from Australia and it is so cool to see ARB products being used in the USA. ARB is an Australian company formed in Melbourne, Australia in 1975. ARB is the founders actual initials. Anthony Robert Brown. another great product that the rest of the world probably doesn't even know is Australian designed and originally only made in Australia. your welcome.

I love how they’re starting off with the “and the furious” part of the build rather than the “The fast.” I also, love how these trucks contrast the 350Zs in how they’re adding weight instead of removing. Pretty fascinating

@Kevin-dt9xm

2 жыл бұрын

that moment in the wheels and tires episode when theyre weighing the tires and hi-trucks wheel/tire combos are almost twice as heavy as stock, and theyre like "this feels wrong, this feels backwards" lol

@skilledtradesscotty4896

2 жыл бұрын

Welcome to offroad 101 lmao

@kavin7610

2 жыл бұрын

@TommyInnit 🅥 rick roll

“Nolan continued making excuses for the next 40 minutes” was the funniest part of the episode

@cavemanvi

2 жыл бұрын

i thought it was funny they blurred out the high truck license plate implying they kept that one and sold the other one.

@weirdbeardgarage

2 жыл бұрын

To be honest I think Team Low should be given more time to finish fabricating stuff. Usually you can do it fast or you can do it cheap, but not both.

@jontong2804

2 жыл бұрын

kzread.info/dash/bejne/hYyD07eAg8_NlKg.html

Love the high low series. Keep em coming guys 👍

Love this season I can’t wait for that next ep!!!

"A grinder and paint makes you the welder you ain't." - Nolan, probably

@jeffduncan02

2 жыл бұрын

-AVE

@vermontmoto7155

2 жыл бұрын

That’s a Jennies Garage quote 👍

New idea: Hi-Vehicle gets James plus some general helpers, Lo-Vehicle gets Zach and Aaron plus Nolan. Money vs Skill. Off-the-shelf vs knowledge and elbow-grease.

@mattwise9748

2 жыл бұрын

I think that kinda defeats the purpose of seeing what you can do on a DIY budget, skill doesn't come cheap by any means (unless you have a mechanic in the family that works for beers)

@Si74l0rd

2 жыл бұрын

I was impressed by how much difference there was in James fab skills. In the first series of hi car he mostly sat on his arse lol. Now he's actually fabricating! Different armour for different situations is what this shows. You can tailor it when you do it yourself and anyone can learn to weld. But it definitely does take so much time!

@SSEF15

2 жыл бұрын

I don't know, the reason servicing cars is so expensive at the shop (at least in my case being a sucker straight 6 BMW driver) is because you're paying for the time an experienced mechanic gets to look at it. In essence you're achieving the reverse. I would rather pay for expertise and medium parts vs. amateurism and top of the line stuff.

@beardedforlife3740

Жыл бұрын

@@mattwise9748 most diy-ers are skilled hence why they diy

@beardedforlife3740

Жыл бұрын

@@SSEF15 I can only agree with that if the mechanic is actually knowledgeable and good at what he does. It's far too often that you see mechanics aren't very good and have really no clue about what they should be doing

Lots of work and production in this. Great team work, I liked it.. Was fun to watch.. even though I got a tiny bit scared at the "IT'S FAIR" segment.. lol.. but I know it was all in good fun.. Cheerz

i love low team front bumper, and especially LOVE this series because it keeps me from being afraid of trying things i don't yet know, and inspires me to take chances. I love it!

"except inside of a volcano" wistlindeisel: "hold my beer"

@SethsPhone

2 жыл бұрын

TopGear: Am I a joke?

@yungboicontigo9278

2 жыл бұрын

Diesel*

@juliuscaesar69

2 жыл бұрын

@@yungboicontigo9278 so your that guy huh?

@LloydLynx

2 жыл бұрын

@@juliuscaesar69 you're*

@yungboicontigo9278

2 жыл бұрын

@@juliuscaesar69 Ratio

Anyone else get hit with nostalgia every time that theme plays?

@Cro_man_

2 жыл бұрын

@TommyInnit 🅥 fake tommy i hate u bot

@psentient932

2 жыл бұрын

I miss the fart sound tho

@makfrags14

2 жыл бұрын

@@Cro_man_ same. This fucking bot is everywhere

@Patient_Lion_BS

2 жыл бұрын

Does anyone know what the music is called? 14:52 btw

@ThePastacholie

2 жыл бұрын

@@Patient_Lion_BS ad infinitum by oh the city

WRITING EDITING ANIMATING PRODUCTION VALUE PERSONALITIES You guys and gals deserve all the success you've been having and more coming your way!!!!

The editing was so on point. That part with the wielding helmet drop fail and the beat drop match up is excellent

@jeremyclose705

2 жыл бұрын

Dude so funny

@Ziabach

2 жыл бұрын

I cracked up!

@djbis

2 жыл бұрын

I giggled.

@BradVicious

2 жыл бұрын

Right?! I LOVE this season!

@jonathanforney5659

2 жыл бұрын

I did the ole left side double-tap for another go of that editing genius.

I want to see them take these things to Moab or the rubicon trail when they’re done modding them for some serious off roading.

@SketchyAsFunk

2 жыл бұрын

Agreed! But with some experience to help them out forsur.

@agent82597

2 жыл бұрын

lol they wont survive

@SketchyAsFunk

2 жыл бұрын

@@agent82597 they would be fine I bet. They are too timid to hurt themselves

@riskvlogs4795

2 жыл бұрын

In the podcast they said they already did

@unadultratedtrini

2 жыл бұрын

It's a Toyota, once they don't mess too much with it, it should handle well.

On the low truck it would of looked nice if the front chrome part had drilled holes (like the aero jdm ones) all across and sprayed with bedliner to blend in better as a whole assembly

I'm happy that Nolan won this. He deserves it.

Whoever does the 3D models and graphics for Donut needs an official shout-out. Amazing work

zach, “ no longer sick “. still sounds congested af. he’s such a g

@lordrc9610

2 жыл бұрын

gotta push through lol

The music in this episode is fire 🔥 loving the hi-low theme music

I have been into Toyota trucks for almost 20 years and in that time and 6 different Toyota off road vehicles I’ve never been able to afford a ARB bumper but I have always been able to access equipment to fab up front bumpers and slider bars, that’s the beauty of the Toyota off-road community there is always someone that’s excited to help you out with a fabrication project

As a wise man once said: "Grinders and paint, make me the welder I ain't"

@DuBstep115

2 жыл бұрын

Reminded me of the video $*#t Welders Say, "It will look good after you grind it"

Love these series. However, I do think production time took precedence over quality and content. Low team's lack of planning for a design really put them at huge disadvantage but even Hi team was clearly under pressure for time as well considering the rear bumper wasn't painted.

@omega1575

2 жыл бұрын

Yeah, last season they had like 2-3 weeks to film the series, so they probably have a similar amount of time this season

Both are looking so rad!

the increase in production value makes me proud, keep it up guys

I really wish they would’ve given Them the time to see the diy sliders and skid plates. I would love to see that. Even if it was just some protection on the important parts. Not as thorough I guess is what I mean.

@tylerhale1696

2 жыл бұрын

Yeah it’s kinda crappy that they get rushed and it’s halfassed

@LoneWolf-ni1zj

2 жыл бұрын

I've built sliders much nicer than the ones Hi Truck has... at a fraction of the cost. I agree... they should have let "Low - Truck" finish their fabrication.

@dubious6718

2 жыл бұрын

Ran out of time is the worst excuse when your doing DIY. This is more like "we couldn't be arsed to do it".

Never have I rooted for Lo-team so much before - the had to design AND FABRICATE their own bumpers. Hi-team just bolted a $1000 bumper on - yeah great man, I could do that and I'm a computer nerd

@bobswaget118

2 жыл бұрын

time is money, so the more you spend the less time you waste

@taliesinangling3564

2 жыл бұрын

@@bobswaget118 Use not waste, waste creates a negative connotation

@Gnasherism

2 жыл бұрын

@@taliesinangling3564 right on brother! Haha. It’s not wasted time if it was fun or worthwhile in any way

I love the editing. Great job on the team who does it. For example 13:35

The diy bull bar turned out great for first time!

This show could easily be a full Amazon or Netflix series. Always good.

Y’all actually did an amazing job with the fabricated front bumper. It looks amazing

@luisjuanduran9766

2 жыл бұрын

It does right ? Plus the other is way to big

@overindulgent

2 жыл бұрын

Yea, it really did. I'm disappointed they didn't do the other fab work. That's what they said would happen and they didn't deliver on this episode.

This video out of the series is the one that had me in suspense haha. Go team low!

CAD, Cardboard Aided Design, love it!

“It’s pretty bad, but I’ll grind it down” is to metal work as “Caulk it and paint it” is to carpentry/construction.

@metwono

2 жыл бұрын

Not really.

@SeeWorldKevin

2 жыл бұрын

@@metwono yes really

@Cijpher441

2 жыл бұрын

a grinder and paint make me the welder I aint

@brettmorton4658

2 жыл бұрын

Just do your best and caulk the rest! ***When in doubt grind it out!-*** Construction trade secrets rite there T.

I love the new series of hi-lo, especially as they're explaining what all the terms mean, making it easier to understand.

@fuerlingerp

2 жыл бұрын

like FBOO?

@abundantcat7448

2 жыл бұрын

@@fuerlingerp FRONT BUMPER OFFICIALY ON!!

@jontong2804

2 жыл бұрын

kzread.info/dash/bejne/daRrtceJhpeokrg.html

@abundantcat7448

2 жыл бұрын

@@jontong2804 no

I wish at the end of each Hi-Low series, they make an ideal build (combination of Hi and Low parts) for every budget range

@mrt2this607

2 жыл бұрын

Most definitely. I've got a project car in my garage and like doing the fabrication myself. I'm only limited by the amount of tools I'd need to make more custom parts. Of course money becomes an issue with both, but ya really can save a boatload of dollars if you're able to do it yourself, as long as you have the tools, time & material. Plus their's more satisfaction in your work when you're fabricating & installing yourself. Hopefully some day soon more project comes together & works great.

Hooray!! More hi-low to watch on repeat!!

Forget hi-car vs low-car, it is now Tankoma vs Desert Ninja!

i feel like lower tire pressures would've made a big difference with traction over those obstacles

@bayoureelin791

2 жыл бұрын

Most definitely

@Kuj

2 жыл бұрын

Yeah they figured that out in the last vid but seem to have forgotten. low psi makes all the difference for grip on this kind of stuff. looks like they are still running low 30 psi levels

@scottmalcolmson4584

2 жыл бұрын

Agreed, I commented about that two. Low pressure would have definitely helped low truck where it got stuck

@kainanshaw659

2 жыл бұрын

Hi team continues to sleep on their pricey beadlocks.

Love you guys so much You are my Covid nurse stress relief!

I got my front bumper and rear towbar from wreckers, installed them myself, got both for under $400(AU) ~$350 (US). they were quality parts and only took me a few hours, the perfect inbetween

Bonus points episode, full servicing. Oil change alone is gonna be hell now

@asktoseducemiss434

2 жыл бұрын

thanks for editing and hosting these awesome videos:)

@anthonybefus8453

2 жыл бұрын

the hi teams skid play has a hole for the oil pan plug and the filter would be accessible from the engine bay

“Be kind” Nolan “I love you” james Always gets me, we love u too Donut.

@jontong2804

2 жыл бұрын

kzread.info/dash/bejne/hYyD07eAg8_NlKg.html

Low team gets all the credit at the trail. High truck most people would look at and assume daddies money bought it. They are the ones that call for a tow when stuck or something broke. You look at low truck and know that if they break something or get stuck, they probably have the skills to get home under their own power. Hand fab and built with the cheaper parts is literally what going off road is about. You know stuff is going to break, and need fixing. Why spend thousands more than necessary on the same parts. Good job, boys. +10 street and trail cred to team low truck.

That low truck front bumper is sick! Good job guys!

The intro keeps making me more and more convinced that there will be HiLow stockys in the near future :)

@rafaelpolastri7907

2 жыл бұрын

HiLow stockys that you came with both the stock parts and modified parts!!

@KSV2366

2 жыл бұрын

I think they will give us the stock and the parts separately. 🤔

@cole5581

2 жыл бұрын

i hope they make them i want my car as a stockys

@TheDesiDragon

2 жыл бұрын

@@cole5581 Ultimate goal is that they have a shit ton of cars to choose from, possible even parts :)

@TheIcyWulf

2 жыл бұрын

YES

Season 3 they should switch the teams up from James going to lowcar and Nolan going to hicar.

@brandonmiller9155

2 жыл бұрын

What would they build?? 🤔

@Mister_Mag00

2 жыл бұрын

lol James is the big boss, that will never happen, nor should it lol

@forresttm

2 жыл бұрын

Totally agree. Would be fun to see them swap.

@blackblaze1996

2 жыл бұрын

@@Mister_Mag00 It should considering it would be more fun. Big boss of not the point is to make it interesting for people to watch so he can make more of them aka make money lol.

@ak47boy22

2 жыл бұрын

@@brandonmiller9155 Drift cars would be cool tbh

Feel like Nolan and Aaron really have become close bros over this series... Nothing like overcoming challenges and persevering through disadvantage together to forge a bond.

I feel like this channel is ran by fellow people my age who grew up watching TNN shows like TRUCKS!, Hrspwr TV, Shade Tree Mechanic and that 4x4 one i can't remember the name of right now. I miss those shows man. Every weekend I'd watch em with my dad

James: “Zach is sick today.” 3:41 *Sees Zach installing running boards. Me: “You liar! Zach is never away from the action.”

@peanutallergy5318

2 жыл бұрын

It's his clone that they try to keep secret

@Godtism420

2 жыл бұрын

But where is money pit

@peanutallergy5318

2 жыл бұрын

@@Godtism420 his clone isn't a mechanic

@Lord_DOOM777

2 жыл бұрын

@@Godtism420 I messaged him on ig he said they are finishing doing hi low before finishing money pit

@Godtism420

2 жыл бұрын

@@Lord_DOOM777 ahhh

As a welder, I cant agree more with "Its pretty bad, but ill grind it down."

@Rusty90

2 жыл бұрын

Welded for 13+yrs. you shouldn’t have to grind anything down. Not that I’m opposed to it but if ur a welder, you shouldn’t have to grind anything down

@laskinslt7137

2 жыл бұрын

@@Rusty90 where I'm at the inspectors want a certain kind of profile. So alot of it calls for grinding.

@Rusty90

2 жыл бұрын

@@laskinslt7137 got ya. I was talking more about actual crap welds that get ground just to look better then spray painted over but won’t hold crap. Everyone has to learn, I’d rather see ppl have crap welds and keep at it rather than just polish a turd. Grind it out and keep welding til you have a nice weld. Grind and paint after that where needed such as ur case

@2S1L3NT

2 жыл бұрын

@@Rusty90 Eh, hobbyists don't really need to go through all that. If its a project that requires welding and they maybe pull that welder out once a year, "polishing a turd" is just part of the mix. They don't need, or likely even have the ability to weld hundreds of projects to get the kind of skillset expected of someone doing this professionally for work 🤷🏽‍♂️

@TheGrimiest

2 жыл бұрын

@@Rusty90 I build bridges for a living and we grind a lot of stuff lol

LOVE THE 4X4 CONTENT- luv from Australia

This is such a great series.

James: I feel confident running over any animal. Canadian Moose: Hold my Labatt 50, eh.

@tonyberg1947

2 жыл бұрын

Yeah, you'd just about need a tank for that. At least.

@walied2039

2 жыл бұрын

Or arabian camels

@samuelhervieux3514

2 жыл бұрын

Labatt 50***

@mannydrives

2 жыл бұрын

@@samuelhervieux3514 😂🍻😆

@TheIcyWulf

2 жыл бұрын

Yeah the Caribou'll show that puny little Taco a thing or two

These videos makes our days better

When we were in high school in the 70 's a friend put a 57 Chevy truck body on a blazer . The front bumper was gone so he made one out of a railroad tie ! He carved it perfectly with chainsaw, sanded and painted it, we would knock down small tree's on off trail excursions no problem

I kind of like the way the DIY bumper looks. I really like it.

Aaron: “we’ve got to keep the chrome pristine and un-scratched!” Also Aaron: **yeets the bumper onto the floor**

@MrSatchelpack

2 жыл бұрын

That editing was money.

I LOVE HI LO!!! hope this series keeps going with more builds.

@dontreadmypicture9000

2 жыл бұрын

Biff was the first time you have the right of the day as a black guy in a few ❌ *DONT READ MY NAME* ❌

No, James, you don't need lockers... you just need to let some air outta your tires and they'd have crawled you right over that instead of spinning.

@lukejohnson6623

2 жыл бұрын

There’s a lot of not fair comparison here there needs to be the same driver and spotter on all the stuff

@lukejohnson6623

2 жыл бұрын

There’s a lot of not fair comparison here there needs to be the same driver and spotter on all the stuff

@Frozander

2 жыл бұрын

@@lukejohnson6623 It is for fun in the end. No need to take it too seriously

@lukejohnson6623

2 жыл бұрын

@@Frozander yeah I know I’m just saying

@DaveyLuckky

2 жыл бұрын

@@Frozander It is true though spending thousands on comparisons and we have no static variable or unchanged benchmark. One team is clearly higher driver mod than the other, hard to actually look at the trucks efforts and comparison specs after the fact. When I know a lot of people who could make low truck look like high truck in one run.

It would be great if you did a similar series where both teams had a identical budget and a set task, then spend the money based on each teams preferences so they both have the same $$ into them but in different areas based on your preferences and experience from these two seasons

Makes me feel more comfortable about my 4runner build. Low team for the win

@connorcole5385

2 жыл бұрын

Lmao I feel you, I used to drive a *Lo Truck* tricked out 4th gen and watching this series, minus suspension, makes me realize I truly made the right choices in everything I put on it😂😂

What’s funny is that the front bumper of the Hi-Truck was pulled off in the finale!😮😂😅 I know I know… it can happen but ironic. BUT I’ll take the HiTruck bumper for looks & time required!

I can honestly say that I am totally impressed with the custom work. While I agree the choices made were much cheaper -- the $800 vs $4000 -- the cost of all the custom work wasn't clear. (did I miss that in the video?) Two questions I think most of us in the "real world" might have, or at least I have... 1. What would that labor typically cost someone who didn't have connections and friends? 2. What's the difference in added weight between the custom work and the expensive stuff?

Ngl I love the animations they use when they’re showing which parts of the armour they have put on the car so far

The editing with Pumphrey's welding-helmet-fail is absolutely epic!

@jontong2804

2 жыл бұрын

kzread.info/dash/bejne/gIOW1s6yoJi7k7g.html