5 Ways Of Avoiding Toxic Welding Fumes

Avoid toxic fumes in your shop with these 5 options to keep you safe.
Hardface without nickel and chrome with Castolin Eutectic Safe-Hard 600 (E-shop delivering to UK, Ireland, Germany, Austria only) foxly.link/khPvJD
For US and other countries, contact www.castolin.com/contact
Find your place in the welding community in the WELD App foxly.link/fRUvUg
Want to learn more about topic Avoiding Welding Fumes : Extract Toxic Welding Fumes with Abicor Binzel foxly.link/QWW91Y
Check Out The Great Gear From Our Trusted Partners
Castolin Eutectic Safe-Hard 600 - foxly.link/khPvJD
Save 10% On Outlaw Leather with WELD10 - foxly.link/bwqtJG
Gentex PurFlo - foxly.link/GqxJ5I
Caiman Welding Gloves - foxly.link/frIVPh
Connect with us!
🧰 Web: weld.com
📣 Instagram: / welddotcom
📲 beta.weld.com/
🎥 TikTok: / welddotcom
Subscribe to our Podcast
Apple Podcasts - foxly.link/VYv2iJ
Spotify - foxly.link/sgPEGB
Ways to Work with Us
Share your work in the Weld App to let us know what you want to see beta.weld.com/
Want to make a video with us www.weld.com/partnership
Question - What ways do you protect yourself from toxic welding fumes?
Disclaimer: Videos produced and made available by Weld.com or any of its affiliates, subsidiaries, or representatives (collectively, "Weld.com") are provided for informational purposes only. Although every effort has been made to provide the most accurate and useful information from sources believed to be reliable, no warranty, expressed or implied, is made regarding accuracy, adequacy, completeness, legality, reliability, or usefulness of any information. As tools, products, materials, equipment, techniques, and applicable laws, regulations and ordinances are constantly changing, Weld.com cannot and does not assume any responsibility or liability for the accuracy of the information contained herein. Under no circumstances shall Weld.com be responsible or liable in any way for any content, including but not limited to death, injury, errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in a video, on a website or by other means, whether displayed by Weld.com, or a third party in its original or a modified form. All content is subject to Weld.com and any third party's applicable terms and policies. Carefully review all terms and policies.
ALWAYS USE CAUTION WHEN UTILIZING ANY DISPLAYED TOOLS, EQUIPMENT, TECHNIQUES OR PROCESSES. IF EVER IN DOUBT, CONSULT A LICENSED PROFESSIONAL. ANY RELIANCE ON THE PRESENTED INFORMATION IS STRICTLY AT THE VIEWERS OWN RISK.
EACH VIEWER EXPRESSLY AND VOLUNTARILY ASSUMES ANY AND ALL RISKS INCLUDING, BUT NOT LIMITED TO, DEATH, DISABILITY, AND/OR SERIOUS PHYSICAL INJURY RELATED TO THE USAGE OF ANY TOOLS, EQUIPMENT OR TECHNIQUES OR PROCESSES IN THE PRESENTED CONTENT. IN THE EVENT OF AN INJURY IMMEDIATELY SEEK MEDICAL ATTENTION.
Time Codes
00:00 Introduction
00:46 Move Your Head Out Of The Fumes
01:41 Get The Air Moving
02:33 O2 Armor
03:40 Castolin Safe Hard 600
05:23 Respirator
06:48 PAPR System
#weldingsafety #toxicweldingfumes #ppe #weldingfumes #welding #welddotcom
About: Welcome to Weld.com, your one-stop hub for all things welding! Whether you're a beginner looking for how-to guides on MIG, TIG, Stick, Flux Core welding, or a seasoned pro seeking DIY project inspiration, we've got you covered. Download the WELD app for even more resources, including educational videos, a welding calculator, job board, marketplace, and a community of welders worldwide.

Пікірлер: 85

  • @charlie-jay
    @charlie-jay24 күн бұрын

    Dad was a welder for 50+ years. He gave up smoking 30 years ago. Lung and throat cancer still got him in the end. He watched his family grieving for him as he died full of pain earlier this year. Keep yourselves safe, please.

  • @Welddotcom

    @Welddotcom

    11 күн бұрын

    Sorry for your loss, people worry about the cost of PPE but the cost of the adverse effects of not using it is way worse.

  • @ara_brodjian2533
    @ara_brodjian253324 күн бұрын

    Ever since I started welding a couple years back I’ve always worn a 3m half face respirator with a 2097 filter… I’ve had plenty coworkers make fun of me for wearing it saying that tig welding doesn’t put off fumes. It’s truly sad that people deny the fact that welding fumes are awful for ya. I tig weld stainless steel, every time I change a filter it’s crazy to see how much dirtier the old filter is compared to the new ones!

  • @lee161a

    @lee161a

    24 күн бұрын

    Same, I started welding more than a decade ago. Have always worn the 3m half respirator under my mask. Let those knuckle heads breathe in the ozone, manganese, chromium, zinc and other crap.

  • @Mrkermit261

    @Mrkermit261

    23 күн бұрын

    @@ara_brodjian2533 news flash- everything is bad for you.

  • @chrisp9046

    @chrisp9046

    22 күн бұрын

    Does the 2097 have good protection against organic vapors or is it just OV relief. I had a P100 with OV relief I would wear and I’d still get headaches after work welding galvanized and stainless a lot not to mention antispatter spray and what not. Just upgraded to an ellipse p100/organic vapors and gases. Can’t smell anything anymore and I go home headache free. I’m probably still fucked from the four years of improper respiratory protection. Long story short make sure you’re protected from vapors and gases too.

  • @BabaYaga214

    @BabaYaga214

    22 күн бұрын

    I found a Miller half face respirator at a welding supply store. Fits nicely under my hood. The 3M ones from Home Depot were too bulky to lower the hood while wearing them

  • @chrisp9046

    @chrisp9046

    22 күн бұрын

    @@BabaYaga214 What kind of material are you welding though and process

  • @markdavidson1991
    @markdavidson199115 күн бұрын

    Speeglas G5-01 vc Outstanding variable colour lens, clear visor for grinding, well balanced and adjustable air flow which is incredible on hot days. I can't believe so much Americans are still wearing fixed shade hoods without something to protect your lungs from dust and fumes. Especially if welding stick and flux in a fab shop, even if your are air arc gouging outside (within a large group) the fumes especially are bad. No company pays you enough to sacrifice your health. Stay safe gentleman

  • @Welddotcom

    @Welddotcom

    15 күн бұрын

    Definitely different safety standards in the USA compared to other countries. Your health is definitely not more important than a paycheck.

  • @ReBeksonn
    @ReBeksonn25 күн бұрын

    Never sacrifice safety for comfort

  • @Jonathan_Doe_

    @Jonathan_Doe_

    25 күн бұрын

    I’ve literally got arthritic discs in my neck from wearing a 3M speedglas. Things heavy. Gonna put in a request with my employer for a lighter optrel filtered setup or something.

  • @ReBeksonn

    @ReBeksonn

    25 күн бұрын

    @@Jonathan_Doe_ really...been using 3M for 3years ..no problem

  • @peterweidmert3208
    @peterweidmert320824 күн бұрын

    If you planning to invest in PAPR check in Sundström SR574 and the fan unit SR 500. Then you CAM protect your lungs from what was mentioned here. You allso get a combined weldingshield and grinding protection in one unit.

  • @Kaizen_2k
    @Kaizen_2k24 күн бұрын

    3M makes a "quicklatch" version of that respirator and its so much better for talking and not fogging your glasses too, also ive recently purchased a 3M speedglass papr/hood and its so worth it.

  • @mindthependulum6245

    @mindthependulum6245

    24 күн бұрын

    And how many megabucks does that cost? Not a real solution at those prices!

  • @Kaizen_2k

    @Kaizen_2k

    23 күн бұрын

    @@mindthependulum6245 got mine more than half off brand new if you know where to look. like i said the quicklatch 3m half mask is really practical for everyday work if you were paying attention :)

  • @JohnWheels

    @JohnWheels

    15 күн бұрын

    The quick latch is $35. I love mine.

  • @toterola451
    @toterola45125 күн бұрын

    Excellent practical presentation. I'm looking at options for a home shop I'm setting up in two bays of my garage. I'm leaning towards a central fan and making a portable "smoke eater" from a HEPA vacuum with a large suction side hose. I deconstructed an NSA certified welding smokeeater that my work bought for the shop a few years ago, and that's literally all it was: a fan with a filtration system and an 8" suction hose with hooks and a handle.

  • @user-kf9nd5rq6y
    @user-kf9nd5rq6y25 күн бұрын

    Nice concise presentation of personal protective equipment (PPE). Thank you. Can you likewise share knowledge and experience on shop-based systems, such as mobile hoods, downdraft tables (how with shielding gas?), and full-shop setups?

  • @Collective_Judas
    @Collective_Judas24 күн бұрын

    I have already learned to wear a mask from 3m at all times. It is quite comfortable and does not make breathing difficult a little tip: choose the 6500 or 7500 series where the outlet is at the bottom - this will prevent the windows from fogging up

  • @wrecker1861

    @wrecker1861

    22 күн бұрын

    The 7500 paired with 2297 filters is a mint setup.

  • @mindthependulum6245
    @mindthependulum624524 күн бұрын

    What really chaps me, is how safety equipment like fume extractors and helmets with respirator functions cost so very flipping much! The technology used to make them and the materials are cheap. It’s like no one who makes welders wants us to breathe safely unless we are LOADED. This is an outrage and needs to change ASAP. When will some company offer viable solutions for welding fumes at truly affordable prices??????

  • @sohnwehseler9327
    @sohnwehseler932724 күн бұрын

    Great stuff, very important. If you're a garage welder like myself, you might also consider installing an inline duct fan with a long flexible hose to move wherever your work is. I went with a Harbor Freight 8" inline fan in the rafters ducted outside. It more than handles whatever smoke I throw at it. Money in the bank. Also, don't forget your hearing protection when your grinding! I didn't until it was too late, and it's no bueno now.

  • @Welddotcom

    @Welddotcom

    11 күн бұрын

    A little DIY fume extraction goes a long way!

  • @tereg5
    @tereg525 күн бұрын

    Such an important topic especially for home hobbiest that haven't been been trained on the serious dangers. I'm saying my $ for a Swiss Air Optrel so I can' use for woodworkings and welding projects. Thanks for highlighting this topic. Q: what 3M filters are those. I have a similar mask and wondering if there a specific filter for welding/grinding.

  • @MacDaddyShreds
    @MacDaddyShreds24 күн бұрын

    Safety is number 1!!!!

  • @tropikjet7113
    @tropikjet711318 күн бұрын

    I use the 3M quick latch respirator it’s a gel material and it allows you to flip it down if you need a quick drink or say something to somebody without having your respirator fill with crap and without having to take your hood/hard hat off

  • @Welddotcom

    @Welddotcom

    11 күн бұрын

    That would be very nice to have.

  • @AnyHistory07
    @AnyHistory0725 күн бұрын

    Thanks :D

  • @angelvargas9042
    @angelvargas904225 күн бұрын

    that PAPR welding hood is $2K, holy cow!!

  • @toterola451

    @toterola451

    25 күн бұрын

    Neuromuscular damage and lung cancer are a lot costlier. $2K ain't no hill for a stepper if you're a qualified welder.

  • @angelvargas9042

    @angelvargas9042

    25 күн бұрын

    @@toterola451 I'm perfectly fine welding stick out in the field and having the wind blow away the fumes and using the miller respirator for dual shield shop welding. Yes, your correct, your health is more important, but we also have to consider the rise of capitalism and the introduction of fear these company's bring to blue collar workers. COVID was a prime example, if you can make someone feel unsafe unless they buy this and that in order to feel better about themselves, they most certainly will. As an engineer and structural steel contractor, if I've learned anything about college, its the brainwashing and intimidation large corporations bring on working families that sustain this country.

  • @user-qk3il1rq6o

    @user-qk3il1rq6o

    24 күн бұрын

    Don’t worry. Welders won’t buy it until really good at welding.

  • @toterola451

    @toterola451

    24 күн бұрын

    @@angelvargas9042 conflating a welding hood PAPR with a worldwide pandemic is a bit of an inductive fallacy. Keep your anti-science bullshit to yourself and stick to the topic at hand. Capitalism is the system we're stuck with. If the Capitalists were behind filtered air for welding hoods, they'd figure out a way for everyone to be required to wear them. Nobody said anything about working inside or outside, except the guy who did this excellent video. I suspect that most anyone knows that it's safer, as far as one's respiratory health, to weld outside. If you have to weld in close quarters, it's ALWAYS better to wear a respirator. I come from coal mining and mineral extraction country. Watching people die from black lung, silicosis, strange cancers, neuromuscular failure, and other ungodly shit because they didn't have proper PPE was a fact of life growing up and working in the skilled trades. I don't want these young people to have to play Russian roulette with their health the way my cohort had to.

  • @slayer1561

    @slayer1561

    24 күн бұрын

    Yeah, PAPR hoods range anywhere from $1400 to $2500. It's a good investment, especially if you're planning to make a long career out of welding.

  • @Equiluxe1
    @Equiluxe124 күн бұрын

    I remember my brother in laws shop back in the early 1970's. He had seven welders in there all burning no 8or no 10 rods on structural steel no fume extractors. The only good thing was the building was quite tall, but it still filled up with thick fumes by the end of the day and if you went up onto the mezzanine you got gassed pretty quickly.

  • @mk27wrx
    @mk27wrx24 күн бұрын

    Have you ever heard of a neck fan before , they are great for welding i am currently using one.

  • @fraserlewis5767
    @fraserlewis576724 күн бұрын

    I wear the 3m respirator anytime I’m welding for long periods of time. I weld stainless and it’s a common misconception that it’s clean but in reality it releases some of the most harmful fumes out of all the welding processes

  • @mrhardway5278
    @mrhardway527824 күн бұрын

    I use optrel Swiss air it is only a grand and you can use almost any hood

  • @Dibulok
    @Dibulok25 күн бұрын

    Americans please, there are welding masks with fresh air units like 3M Speedglass fx models. Please start to use them. Everybody in europe uses those types of units.

  • @ktmturbo5836

    @ktmturbo5836

    24 күн бұрын

    I have the 3m 9100mp. Had it since 2014 works grate. It's also a great advantage when it's hot outside, as the mask provides comfortable cooling

  • @Nubbe999
    @Nubbe99924 күн бұрын

    That system looks heavy with a fan and batteries in the mask. I would recommend 3M Speedglas Welding Helmet G5-01 with Adflo Fan-assisted breathing protection

  • @ktmturbo5836

    @ktmturbo5836

    24 күн бұрын

    Definitely the best mask you can buy. If you need it with a helmet, I recommend 3m 9100mp

  • @repost1410
    @repost141025 күн бұрын

    Step 1:Keep head out of smoke Bro: proceeds to put head in smoke

  • @ktmturbo5836
    @ktmturbo583624 күн бұрын

    Nothing beats 3m's welding masks with adflo. Available with or without built-in helmet. It's also very comfortable to wear when it's hot, as the mask has a cooling effect. And a big plus is that you can flip up the front and have a large clear visor underneath when grinding.

  • @Mrkermit261

    @Mrkermit261

    23 күн бұрын

    Dont do you no good unless your a production welder thats over a table all day

  • @ktmturbo5836

    @ktmturbo5836

    23 күн бұрын

    @@Mrkermit261 Nonsense I use my 3m 9100mp everywhere. Inside boilers outside on buildings inside the workshop, but have experienced that it has been too cramped a couple of times. And then I have used a regular p3 mask

  • @monk8235
    @monk823524 күн бұрын

    ya, I started wearing a simple disposable 3M N95 leftover from the COVID and my headaches disappeared. not super comfortable, but it's night and day.

  • @policedog4030
    @policedog403024 күн бұрын

    For a solution to the hot shop, a mitigation could be something like the older Land Rovers used, which was a second roof, standing off an inch or two so that air could flow between it and the actual cab roof, and the outer roof took the brunt of the radiant heat and kept the actual roof perpetually in the shade?

  • @bmurphy8946
    @bmurphy894622 күн бұрын

    I use a nose and mouth mask that has the tubes that goes to the middle of my back, filters at the end of the tubes. Works good

  • @Welddotcom

    @Welddotcom

    11 күн бұрын

    That sounds like a great option.

  • @Eyore82
    @Eyore8225 күн бұрын

    I weld stainless all day every day.. i use, and highly recommend, 3M Adflo.

  • @ktmturbo5836

    @ktmturbo5836

    24 күн бұрын

    I agree i have the 9100mp This is with helmet, so i can use it all places i work

  • @slayer1561
    @slayer156124 күн бұрын

    That PAPR looks big and heavy... Interesting design but if anyone is planning on getting a PAPR, I would recommend from Optrel or 3M

  • @user-cv5kp7zz7q
    @user-cv5kp7zz7q24 күн бұрын

    Is that cooling apparatus anzi compliant?

  • @dougb2091
    @dougb209125 күн бұрын

    Unrelated but noticed that big ole gate outside appears to be braced the wrong way. If the gate is hinged on the left then the diagonal should be going from top right to bottom left. Perhaps another weld project! Wohoo!

  • @miningbruno
    @miningbrunoКүн бұрын

    No word on those articulated filtered fume extractors, like Lincoln Electric has?

  • @user-cv5kp7zz7q
    @user-cv5kp7zz7q24 күн бұрын

    Is that papr system anzi & osha compliant?

  • @21Mizfit
    @21Mizfit24 күн бұрын

    The 3m quick latch respirator is better then that standard 3m respirator he showed in this video, a lot quicker and easy to remove or just drop down if you need to talk to someone

  • @slayer1561

    @slayer1561

    24 күн бұрын

    I used that quick latch respirator for a couple of years and I can say it's probably the best respirator out there! The latch makes it easy to drop down real quick and the exhaust is facing the bottom so it never fogged up my hood.

  • @21Mizfit

    @21Mizfit

    24 күн бұрын

    @@slayer1561 yeah it’s definitely the best I’ve used, I do have the problem of my glasses fogging up and that’s the only problem I have with it

  • @shaunalabo
    @shaunalabo24 күн бұрын

    When wearing a 3M mask, you can wash your safety glasses with shaving cream. It keeps the glasses from fogging up.

  • @andrerossi5010
    @andrerossi501025 күн бұрын

    Have you tried the Aliexpress Neck Fan?

  • @batboy020876
    @batboy02087623 күн бұрын

    Ya I feel like this is all coming sense I don't even need to waste time and whatch this

  • @barryjones7025
    @barryjones702524 күн бұрын

    What's a good mask for pulverized coal dust?

  • @ttnd3d_387

    @ttnd3d_387

    23 күн бұрын

    3M. 6200/6300 series with any filter. For powder (toner for laser printers) I use base 603, filter 5911/5925/5935, holder 501.

  • @youtubasoarus
    @youtubasoarus24 күн бұрын

    The most insidious thing about these fumes is that the effects of them don't show up for decades. It's when you're finally trying to retire you end up realizing that all that complacency might have lead to something or another. But by then it's too late. Always got to be proactive with this stuff. I'll take a couple jabs over looking goofy over not being able to breathe properly later. People need to STFU about people wearing PPE and if you want to live dangerously, good for you. We're not in the 40's. We know the health effects. Get on it, wear it. This should be standard everywhere but so many of us are too dumb to get it.

  • @davidpierce7318
    @davidpierce731824 күн бұрын

    1 keep welding at arms length 2 wear air fed system 3m speed glas are ok free at my work 3 on torch extraction 4 use all above keep cancer at arms length

  • @Welddotcom

    @Welddotcom

    11 күн бұрын

    Great advice!

  • @oldreliable303
    @oldreliable30324 күн бұрын

    I just filter it though a pack of smokes...

  • @onmywayout
    @onmywayout17 күн бұрын

    0:30 It literally is your employer's job to keep you safe.

  • @snowgorilla9789
    @snowgorilla978924 күн бұрын

    When it comes to price what's YOUR LIFE worth

  • @rbeezy-
    @rbeezy-24 күн бұрын

    My job only allows us to use the n95 mask. Respirators or filtration has to be 3rd party aproved

  • @scrapmanindustries

    @scrapmanindustries

    24 күн бұрын

    Why? Where do you work?

  • @ghffrsfygdhfjkjiysdz
    @ghffrsfygdhfjkjiysdz24 күн бұрын

    1:50 your lawn is on fire.

  • @EliosMoonElios
    @EliosMoonElios24 күн бұрын

    What about the toxic electrode welding community thinking electrode welding is *THE ONLY REAL WELDING*?

  • @mindthependulum6245
    @mindthependulum624524 күн бұрын

    What really chaps me, is how safety equipment like fume extractors and helmets with respirator functions cost so very flipping much! The technology used to make them and the materials are cheap. It’s like no one who makes welders wants us to breathe safely unless we are LOADED. This is an outrage and needs to change ASAP. When will some company offer viable solutions for welding fumes at truly affordable prices?????? Those partial masks make the helmet fit so poorly that they are useless.

  • @SuperAWaC
    @SuperAWaC24 күн бұрын

    Actually, employers are legally required to look out for your health. It really sucks how welders are the worst about that kind of attitude. That attitude which came from shitty employers.

  • @rokias9513
    @rokias951323 күн бұрын

    Why dont americans dont like speedglass adflo systems? Everytime time i watch americans welding i have never seen them using it

  • @Welddotcom

    @Welddotcom

    11 күн бұрын

    There are different safety regulations over here but trying to help people avoid fumes as much as possible.

  • @TBJK07Jeep

    @TBJK07Jeep

    10 күн бұрын

    Money, ignorance. Not necessarily in order. I’m a hobbyist welder, I can’t afford to drop that kind of cash on a PAPR. While I get that its cheaper in the long run, I have more important financial obligations first, keeping the wolves away.