Pretty awesome video, don't have an e92 myself but I just finished building headlights for my e90 and wanted to do something with my tails. Gave me sort of an insight into how bmw did the LED tubes in the tail lights

@ScubaMade

3 жыл бұрын

That's cool, thanks for letting me know! I hope your headlights came up sikk!!

You bloody legend! Cheers mate will give it a go over the weekend

@ScubaMade

2 ай бұрын

Haha thanks heaps for that ay, I hope it works out for you too! 😁

I just bought my 335i. Entire time I thought it was a brake bulb that needed to be replaced. Turned out it’s the entire tail lights. 🤦🏻‍♂️🤦🏻‍♂️ man bmw have found a way to make money every aspect of the car

@ScubaMade

Жыл бұрын

Oh damn, I hope you can find a good used one somewhere and replace it fairly easily and without spending to much money!

Nice lights gone on my car and this looks like it's gonna be worth a go 🙌🏽💯👍🏽

@ScubaMade

2 жыл бұрын

Yeah man, thank you, that’s a pretty easy fix luckily! I was glad I gave it a go and found a guy who was very helpful at Jaycar (the electrical store).

thank you!!!!!!

@ScubaMade

Ай бұрын

Much appreciated! Thank you too 😃

Thanks mate, you gave my courage to try to do this myself. But we do not have any JarCar in Denmark. So got to get the LEDs from somewhere else.

@ScubaMade

3 ай бұрын

Ohh cool, thank you too, that’s good to hear! Yeah JayCar is probably just here in Australia but glad you found somewhere else!

@b4ph0m3tdk9

Ай бұрын

I fixed this on my BMW 2008 Cab. E93. See the full description with additional info in a new commet I made.

excellent Five Star ⭐️⭐️⭐️⭐️⭐️

@ScubaMade

Жыл бұрын

Thank you very much 🤩 I really appreciate it!!!

mine also shut down the lights.. thanks now i know how and what to open.. wish me luck.. in few days i will try my luck😅

@ScubaMade

Жыл бұрын

Thanks heaps buddy, good luck, I hope you’ve got it working again properly by now!

Thank you my friend, my x5 2021 car, the rear light on the fender and the rear light on the trunk are out of the circuit and sometimes it turns on, and most of the time, the reason , the water leaking from the small wall is a break, do I have to open the inside of the light , or is the problem, for example, the external fuse I have, please advise

@ScubaMade

11 ай бұрын

I’m not sure about that because I don’t know much about that car but if it’s from 2021 shouldn’t it still be under warranty?

thank you great video

@ScubaMade

Жыл бұрын

I’m very glad you think so, thank you buddy!

I fixed this on my BMW 2008 Cab. E93. The housing on E93 is slightly different and thicker, but the print inside is the same, so from this video I could estmate the placement just fine. I too cut the cobberlanes on the printboard and only used the board as a holder for the LED's. You do not need 3mm LEDs, 5mm is very fine too. At first I bought the 1500MCD, but they are NOT bright enough. Is HAS to be the 6800MCD, and if these are not available go UP in brightness, MCD6900 or MCD7000 even. The metalfilm resister at 110ohm can be at a higher watt, I used a 2W, it was very fine. I hope this additional info can help somebody else. Good luck with your project!

@b4ph0m3tdk9

Ай бұрын

In the taillight the BLUE wire is the positive. On the LEDs the LONG leg is the positive.

@ScubaMade

Ай бұрын

Thanks for adding all that extra information, I was just going off what I was told at JayCar, more than that, I didn’t really know what I was doing haha!

@headlightdesigngradacac

9 күн бұрын

Did you use standard 5mm diodes? You know,those arround 2 volts and 20mA?

@b4ph0m3tdk9

9 күн бұрын

LED: Red, 5mm, round top, 2.1V, 20mA, 30 angle, height 8.91mm, no "standoff" on the legs.

@headlightdesigngradacac

9 күн бұрын

@@b4ph0m3tdk9 thank you so much

makes you wonder how many people would get this fault out of warranty & probably paid at least $500 at the dealer for a genhine BMW tail light!

@ScubaMade

3 жыл бұрын

Yeah I hear ya, when I tried to search how to fix it all I could fix was how to replace it not fix it!

awesome work! do you know if the E81 would be the same procedure? tia

@ScubaMade

Жыл бұрын

Thanks buddy! I’m not exactly sure but I’d say it’s quite similar as long as the led lines in the tail light look about the same, not the LCI ones, you should be able to look in from the outside and see the leds at one end of the light!

so what power and size excatly leds you purchased ? answer would help me alotttt ! tnx!

@ScubaMade

11 ай бұрын

Thank you, I’ll see what I can do, I think they’re like 3mm Ultra bright red 6000 mcd LED’s or something like that. I hope that helps!

@b4ph0m3tdk9

Ай бұрын

The LED do not need to be 3mm, 5mm is very fine too. I bought 6800MCD, if they are not available go UP in brightness 6900MCD or 7000MCD even.

@ScubaMade

Ай бұрын

Thanks for that, I’m certainly not an expert on this so it’s always nice to learn more!

Don’t hit the light. All right good job. Let’s hope it don’t rain .

@ScubaMade

3 жыл бұрын

It's all good, thanks bro, I pressure washed it and she's sweet!

Can you please provide a link where to buy the leds and resistors? If i understand correctly you unsoldered the leds and resistor and reused the pcb?

@ScubaMade

3 жыл бұрын

I got them from a shop called Jaycar here on the Gold Coast in Australia, I think they are something like 3mm Ultra Bright Red 6000 mcd LED Light, but I’m not exactly sure. Yeah that’s what I did, just used the circuit board to hold the new LED’s.

@jonathanjaimes6907

7 ай бұрын

Am horrible with directions you are killing me 😂

@ScubaMade

7 ай бұрын

Oh sorry about that, I hope you’re okay 👍🏼

@b4ph0m3tdk9

Ай бұрын

The LED do not need to be 3mm, 5mm is very fine too. I bought 6800MCD, if they are not available go UP in brightness 6900MCD or 7000MCD even.

Hi. Thanks for sharing. Did you change the leds? Or just added the resistor?

@ScubaMade

3 жыл бұрын

No problem, Thank you! I did use new LED's too

@taifunhd_101

3 жыл бұрын

@@ScubaMade hey Wich LED‘s you used ?

@ScubaMade

3 жыл бұрын

I got them from a shop called Jaycar here on the Gold Coast in Australia, I think they are something like 3mm Ultra Bright Red 6000 mcd LED Light, but I’m not exactly sure.

@ScubaMade

3 жыл бұрын

I put the new LED’s in and a resistor and got rid of all the stuff that was already there, I just used the circuit board to hold the LED’s.

@timgraham2858

2 жыл бұрын

Does this work on the inner tail lights too?

Years later here, so add the resistor on the positive side, wire positives in series then negatives in series and that bypasses the board?

@ScubaMade

4 ай бұрын

I think so, I was going off what I was told by the guy at Jaycar! It’s still working years later too!

@thunderfordaysracing3413

4 ай бұрын

I’m gonna give it a go!

@ScubaMade

4 ай бұрын

Sounds good! I hope it works for you too!

@b4ph0m3tdk9

Ай бұрын

In the taillight the BLUE wire is the positive. On the LEDs the LONG led is the positive.

I would love to know exactly what you bought cuz I don't know anything from this video what parts to get

@ScubaMade

7 ай бұрын

I pretty much just brought what the guy at Jaycar sold me when I told him my problem. I think they are something like 3mm Ultra Bright Red 6000 mcd LED Light, but I’m not exactly sure. And some sort of resistor! I’m no expert on that stuff though.

@b4ph0m3tdk9

Ай бұрын

The LED do not need to be 3mm, 5mm is very fine too. I bought 6800MCD, if they are not available go UP in brightness 6900MCD or 7000MCD even.

Hi where did you solder the fuse? Leds I can see

@ScubaMade

2 жыл бұрын

I didn’t solder in a fuse, just the LED’s and a resistor!

@PullaPana

2 жыл бұрын

I’m in need of the leds myself I can’t find them anywhere

@ScubaMade

Жыл бұрын

They were from Jaycar ‘Red 3mm LED 1500mcd Round Clear’ I think that was them! And a 110 ohm resistor!

@b4ph0m3tdk9

Ай бұрын

The LED do not need to be 3mm, 5mm is very fine too. I bought 6800MCD, if they are not available go UP in brightness 6900MCD or 7000MCD even. Definitely NOT the 1500MCD!!!

what size Led lights did you use, was they clear or red

@ScubaMade

Жыл бұрын

I can’t quite remember what size, pretty small, just a few millimeters, and they were red!

@b4ph0m3tdk9

Ай бұрын

The LED do not need to be 3mm, 5mm is very fine too.

Nice vid! please tell me did you have to remove the original stuff from the board ?

@ScubaMade

2 жыл бұрын

Thanks buddy! It was awhile ago now but I did have to take the LED’s out and put new ones in and I’m pretty sure I left the other stuff in there but I didn’t use any of it!

@b4ph0m3tdk9

Ай бұрын

Just cut the cobberlanes on the printboard, then the bord can be reused as a LED holder for your new LEDs.

I did the same thing but it lights are not bright enough

@ScubaMade

10 ай бұрын

Ok, you might need some sort of brighter LED’s maybe, sorry I don’t know to much about all that, the guy at Jaycar helped me find the right stuff!

@b4ph0m3tdk9

Ай бұрын

Yes, the 1500MCD and the 6000MCD mentioned is NOT bright enough. I bought 6800MCD, if they are not available go UP in brightness 6900MCD or 7000MCD even.

Dali neko zna koje su jacine te 3 diode

@ScubaMade

Жыл бұрын

Unfortunately I don’t know exactly, sorry!

Can you show us which wire connect to where?

@ScubaMade

3 жыл бұрын

I did that awhile ago, 1 wire is positive and 1 is negative, it was pretty simple I think.

@jeanfrancoisestimado7039

3 жыл бұрын

Brown=common and blue=positive

@ScubaMade

3 жыл бұрын

Thank you 😊

@b4ph0m3tdk9

Ай бұрын

In BMW lights the BLUE wire is positive. On the LEDs the LONG leg is the positive.

Same problem on my car now but don't know anything about electrical

@ScubaMade

Жыл бұрын

I hope you can find someone to fix it or try having a go at it yourself, it has happened on my 325i and my 335i e92’s so I’d say it’s pretty common unfortunately.

@rommelcunanan7197

Жыл бұрын

@@ScubaMade is it possible to give me the materials you bought to fix it in jaycar

@ScubaMade

Жыл бұрын

Unfortunately I can’t remember the exact specs on the LED’s, but I think they were ‘Red 3mm LED 1500mcd Round Clear’ and the resistor was ‘110 Ohm 0.5 Watt Metal Film Resistor’. Based on the note I got from Jaycar!

@rommelcunanan7197

Жыл бұрын

@Scuba Made ok, thank you. I'll come to my local jaycar on Friday and show them your message so they can assist me. I'll try to do it myself and let you know if it is successful. Thanks again. I do appreciate your help

@ScubaMade

Жыл бұрын

Ok cool, no worries! Thank you 🙏🏼 I hope it works for you! feel free to show them the video and the picture in the video I show at about 8:30 and if they ask what store did that for me it was the Burleigh store on the Gold Coast!

what posessed then into thinking that such part wouldn't need to be serviced..smh

@ScubaMade

Жыл бұрын

Haha who knows ay! They probably weren’t thinking much past the warranty period of the car.

@MR94JOKER

Жыл бұрын

@@ScubaMade exactly lol